Presentatie BIMpraat - BIM bij de aannemerHeembouw
Na een succesvolle presentatie in België en een goed gelezen blog hierover, ben ik door het Nationaal BIM Platform gevraagd bij de maandelijkse BIMPraat een presentatie te geven over BIM bij de Aannemer. Het gegeven is natuurlijk al leuk: een technisch projectleider bij een architectenbureau die vertelt hoe een aannemer BIM’t.
En inderdaad, dat is leuk om te doen.
Vertrouwend op de kennis die wij hebben opgedaan en onze geheel eigen wijze van werken, merk je dat wij als Heembouw/ Habeon Architecten toch echt een andere kijk hebben op BIMMEN en bouwen.
April 2013 vond het seminar ‘De juridische consequenties van werken met BIM ‘ plaats bij AKD, vestiging Eindhoven. Deze PowerPoint presentatie met als titel: ‘Bouw Informatie Model (BIM), Samen bouwen aan een virtueel model!’ is toen gebruikt.
Heeft u vragen? Neem dan contact op met Leonie Mundt (lmundt@akd.nl) of Jacob Henriquez (jhenriquez@akd.nl).
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
Masterclass Kwaliteitsnetwerk Bouw: "BIM in relatie tot kwaliteitsmanagement"nielssmit
Wij kijken terug op een zeer leuke en informatieve Masterclass van het Kwaliteitsnetwerk Bouw waar volop informatie is uitgewisseld en een ieders netwerk is uitgebreid. Hierbij de presentatie.
Presentatie BIMpraat - BIM bij de aannemerHeembouw
Na een succesvolle presentatie in België en een goed gelezen blog hierover, ben ik door het Nationaal BIM Platform gevraagd bij de maandelijkse BIMPraat een presentatie te geven over BIM bij de Aannemer. Het gegeven is natuurlijk al leuk: een technisch projectleider bij een architectenbureau die vertelt hoe een aannemer BIM’t.
En inderdaad, dat is leuk om te doen.
Vertrouwend op de kennis die wij hebben opgedaan en onze geheel eigen wijze van werken, merk je dat wij als Heembouw/ Habeon Architecten toch echt een andere kijk hebben op BIMMEN en bouwen.
April 2013 vond het seminar ‘De juridische consequenties van werken met BIM ‘ plaats bij AKD, vestiging Eindhoven. Deze PowerPoint presentatie met als titel: ‘Bouw Informatie Model (BIM), Samen bouwen aan een virtueel model!’ is toen gebruikt.
Heeft u vragen? Neem dan contact op met Leonie Mundt (lmundt@akd.nl) of Jacob Henriquez (jhenriquez@akd.nl).
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
Masterclass Kwaliteitsnetwerk Bouw: "BIM in relatie tot kwaliteitsmanagement"nielssmit
Wij kijken terug op een zeer leuke en informatieve Masterclass van het Kwaliteitsnetwerk Bouw waar volop informatie is uitgewisseld en een ieders netwerk is uitgebreid. Hierbij de presentatie.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
ECPPM Keynote: don't forget about data consumptionLéon Berlo
Slides of the ECPPM Trondheim keynote titles "Don't forget about import".
This shows the future vision of buildingSMART standards and solutions, and the pathway to get from today's situation to that future.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
ECPPM Keynote: don't forget about data consumptionLéon Berlo
Slides of the ECPPM Trondheim keynote titles "Don't forget about import".
This shows the future vision of buildingSMART standards and solutions, and the pathway to get from today's situation to that future.
20200903 The 2020 buildingSMART Data Dictionary prototype (bSDD)Léon Berlo
The document discusses buildingSMART's Data Dictionary (bSDD) Version 5 API. It provides a safe harbour statement noting forward-looking statements are subject to risks and uncertainties. It lists reasons for a new bSDD as usability, new insights from use cases, and updated standards. It then discusses various aspects of bSDD including spatial structure, object types like buildings and classifications, the use of IFC and property sets, and hosting and using bSDD.
November 26, 2019
IFC needs to become more modulair (again). These slides present the first consensus on how to do that, and shares some questions that need to be answered.
Collaboration with BIM: Stop being efficient, start being effectiveLéon Berlo
This document discusses moving from being efficient to being effective in building information modeling (BIM) projects. It provides examples of highly detailed BIM projects using IFC data formats for modeling, quotations, rule checking, logistics, fire safety analysis, and simulations. Lessons learned include not letting the means become the goal, that data alone does not equal collaboration, and data is only useful when used effectively. The future of construction is predicted to have more available data, automation through robotics and niche applications, and a greater need for knowledge of both engineering and data. Organizations must learn to work effectively with increasingly complex technologies and changing processes rather than just focusing on efficiency.
GEO Desing + BIM Conference: Data sharing is not collaborationLéon Berlo
Shared data and BIM models are not the same as collaboration. A shared data model refers to creating agreements on how data will be standardized and shared, not shared databases or model instances. True collaboration requires each party to focus first on their own work and understanding what information others need from them, rather than assuming shared access to data leads automatically to collaboration. Technology like cloud computing and work sharing supports coordination but does not replace the need for professionals to bring their expertise and craftsmanship to cooperatively solve problems.
20181012 Collaborative Design and Engineering with IFCLéon Berlo
Collaborative Design and Engineering discusses the history and current practice of BIM collaboration and possible future directions. It notes that currently there is a split between policymakers who see BIM as a goal and practitioners who see it as a tool. The document advocates that mandating standards often lags practice and that collaboration is best achieved by focusing on stakeholders' actual needs rather than imposing top-down requirements. It provides examples of large successful collaborative BIM projects in the Netherlands that worked without formal standards by prioritizing data sharing through open standards.
This document discusses the differences and similarities between CityGML and BIM (Building Information Modeling) standards. Both use 3D primitives to represent building components but CityGML focuses on observable surfaces while BIM uses solid geometry. It describes an attempt called GEOBIM ADE to extend CityGML to include more BIM-level detail. However, the prototype had issues with geometry and file sizes and was not widely adopted. Current research still focuses more on geometry and visualization rather than practical applications.
2017 Q1 - BIMserver introduction and overviewLéon Berlo
BIMserver.org introduction and overview. The background, architecture and vision of the platform. Also examples of products that use (or are based on) BIMserver.
This document discusses BIM bots, which are autonomous programs that can extract and apply knowledge from Building Information Modeling (BIM) data without human interaction. BIM bots have characteristics like running independently on their own servers, working automatically, and returning results without interference. Common uses of BIM bots include simulations, coordination, validation, and knowledge mining from BIM data. The document provides examples of existing BIM bots and implications like automating knowledge extraction and allowing for data flows between different bots during work.
FACILITATING THE BIM COORDINATOR WITH AUTOMATED DATA COMPLIANCE CHECKINGLéon Berlo
FACILITATING THE BIM COORDINATOR WITH AUTOMATED DATA COMPLIANCE CHECKING.
Presentatie voor de 'expersessie' tijdens de BuildingSMART Benelux workshop over de 'Informatie Levering specificatie'
2 juni 2016 te Ede
The document discusses innovations in using building information modeling (BIM) data. It describes how the Elasstic platform aims to automate the interaction between BIM data and BIM simulations to enable faster design iteration, better performance insight, and an ecosystem for smaller applications. Key features of Elasstic BIM include running individual simulations on separate servers, automating the process to obtain knowledge/results earlier, using open standards, and having agreements on data interfacing.
This document discusses the future of building information modeling (BIM) and the need to move beyond centralized BIM platforms and models. It argues that true integration will not come from getting all stakeholders onto a single "island" or platform, but rather from connecting specialized tools and data sources in a decentralized manner. The future of BIM lies in niche applications that can share data and interoperate to complete tasks, without requiring dependence on a single centralized system. This approach takes advantage of the fragmented nature of the industry and allows features from different sources to be combined.
20151112 CITA BIM Gathering Keynote DublinLéon Berlo
Leon van Berlo discusses collaborative engineering using Industry Foundation Classes (IFC). Some key points:
- IFC allows sharing of building information models through a common data format, enabling collaboration without a "central model."
- Past studies found using reference models with IFC lowered BIM competence needs and choosing tools based on engineering skills rather than specific software was preferred.
- True collaboration requires understanding what data others need rather than focusing on centralized platforms or standardized BIM execution plans.
- Current BIM practices often work well without top-down policies, instead relying on proven bottom-up approaches and letting high-level users guide discussions.
CIB W78 - Collaborative engineering with IFC in the NetherlandsLéon Berlo
Paper presentation about the use of openBIM (IFC, BCF, etc) in the Netherlands. The presentations shows the process phases of a BIM project and the collaboration iteration cycles.
Paper is online at http://www.stumico.nl/wp-content/uploads/2015_CIB-W078_Collaborative_Engineering.pdf
20. “Virtual Building” concept == BIM
1992: “Building Information Model” verscheen voor het eerst in een
publicatie door van Nederveen en Tolman (TNO)
2003: Building Information Model en Building Information Modeling
(inclusief de afkorting "BIM") gaan ‘mainstream’ wanneer Autodesk
een paper publiceert getiteld "Building Information Modeling"
Léon van Berlo
BIM Technologie update
21. BIM software: Objecten
+ gedrag
+ relaties
+ eigenschappen
+ …
Léon van Berlo
BIM Technologie update
33. • Binnen organisatie
• Focus op effectiviteit
• Passend gereedschap
• Proces optimalisatie
• Grote invloedsfeer
• In een project / team
• Samenwerken
• Kleine invloedsfeer
• Data uitwisseling
• Informatie uitwisseling
Léon van Berlo
BIM Technologie update
34. Samenwerken
“Bijdragen aan een gezamenlijk resultaat door een optimale
afstemming tussen de eigen kwaliteiten en belangen én die van de
groep / de ander”
“in onderling overleg werken”
Léon van Berlo
BIM Technologie update
35. Waarom is BIM zo belangrijk?
Binnen een organisatie:
Effectief werken
In projecten/samenwerkingen:
Wat heb ik nodig van anderen om mijn werk te doen?
Wat hebben anderen van mij nodig om hun werk te doen?
Léon van Berlo
BIM Technologie update
36. Waarom wordt er zoveel over gesproken?
Léon van Berlo
BIM Technologie update
44. Toen kwam BuildingSMART
(1994)
of eigenlijk “the International Alliance for Interoperability” (IAI)
Léon van Berlo
BIM Technologie update
45. BuildingSMART
voorheen the International Alliance for Interoperability (IAI)
Gestart in 1994
Ontwikkelen Industry Foundation Classes (IFCs)
Eerste demo in Juni 1995
“not-for-profit industry-led organization, promoting the Industry
Foundation Classes (IFC) as a neutral product model supporting the
building lifecycle”
Nieuwe naam in 2005 “for marketing reasons”
Léon van Berlo
BIM Technologie update
46. Wat is/zijn IFC?
Een afsprakenset
Hoe je gebouwonderdelen vastlegd
En wat we met die onderdelen bedoelen
En zijn eigenschappen
En de relaties met andere gebouwonderdelen
Léon van Berlo
BIM Technologie update
47. Hoe ziet het er uit?
Léon van Berlo
BIM Technologie update
69. TNO en BIM door de jaren
Internationaal
Standaardisatie (openBIM)
Techniek
Strategisch richtinggevend
Nationaal
Advies (proces)
Kennisoverdracht
Praktische tools
Toepassing NL gebruiken voor Internationale sturing (en vice versa)
Léon van Berlo
BIM Technologie update
72. Binnenkort
NationaalBIMhandboek.nl
BIM Informatieniveaus, Juridische aspecten, Werken met
aspectmodellen, enz…
bimprotocolgenerator.com
ifcValidator (a.k.a. “BIM norm generator”)
Internationaal:
Model view definitions - mvdXML
BIM Collaboration Format BCF, Open source BCF server
BIMSie - federated bim
parametrisch IFC, diverse EU projecten
Léon van Berlo
BIM Technologie update
73. Wat heb je nodig / moet je leveren
NationaalBIMhandboek.nl
BIM Informatieniveaus, Juridische aspecten, Werken met
aspectmodellen, enz…
bimprotocolgenerator.com
ifcValidator (a.k.a. “BIM norm generator”)
Internationaal:
Model view definitions - mvdXML
BIM Collaboration Format BCF, Open source BCF server
BIMSie - federated bim
parametrisch IFC, diverse EU projecten, enz..
Léon van Berlo
BIM Technologie update
74. Blijf op de hoogte via nationaalbimhandboek.nl
Léon van Berlo
BIM Technologie update