Op 30 maart 2017 organiseerde Booosting platform voor koplopers in bouwinnovatie een bijeenkomst met als thema 3D Informatie Model Ruimtelijke Ordening en de omgevingsvergunning. Edward de Wit is senior beleidsmedewerker bij de gemeente Den Haag en sprak over o.a. een 3D dynamisch stadsmodel.
Mechelen focust slim door Ranja Van Asbroeck en Myriam Colle
Stadsatelier Digitale innovatie en communicatie stimuleren
Uitreiking Slim in de Stad-prijs
Onderzoek koppeling beheer en onderhoud aan BIMDWA
Wat zijn de mogelijkheden voor het koppelen van het beheer en onderhoud aan BIM? In opdracht van DWA deed Randy de Jong, student HBO Werktuigbouwkunde, in het kader van een stage, onderzoek naar deze vraag.
Allereerst beschreef hij wat er komt kijken bij het beheer en onderhoud van een gebouw. Op basis daarvan zijn eisen opgesteld voor de koppeling met BIM. Vervolgens is er onderzoek gedaan naar beheer en onderhoud in combinatie met BIM en welke bedrijven zich hiermee bezighouden. Deze bedrijven zijn gecontacteerd en hen is gevraagd naar diverse productspecifieke toepassingen. Het gaat om:
•Planon
•Cad&Company
•De Revit server
•Autodesk BIM 360
•Stabiplan
•BIMserver van de TNO
•ArtrA
In deze workshop wordt u meegenomen in het wezen van het Bouw Informatie Model, een van de exponenten van de razendsnel evoluerende informatietechnologie. De oplossingen van marktleider Autodesk zullen benoemd worden, met nadruk op de laagdrempelige en visuele toepassingen voor de nieuwe media. Naast de technische aspecten zullen onderwerpen als databeheer, slim datagebruik en een veranderende bedrijfsorganisatie centraal staan. Uiteindelijk zijn dit namelijk de meest wezenlijke aspecten voor een succesvolle toepassing van BIM technologieën. BIM wordt inmiddels veelvuldig toegepast, maar wat zijn nou de échte voordelen? En wat zijn de valkuilen waarop geanticipeerd moet worden? Ook de selectie van de gewenste medewerkers wordt benoemd, waarbij een interessante vergelijking wordt gemaakt voor de diverse generaties.
Op 30 maart 2017 organiseerde Booosting platform voor koplopers in bouwinnovatie een bijeenkomst met als thema 3D Informatie Model Ruimtelijke Ordening en de omgevingsvergunning. Edward de Wit is senior beleidsmedewerker bij de gemeente Den Haag en sprak over o.a. een 3D dynamisch stadsmodel.
Mechelen focust slim door Ranja Van Asbroeck en Myriam Colle
Stadsatelier Digitale innovatie en communicatie stimuleren
Uitreiking Slim in de Stad-prijs
Onderzoek koppeling beheer en onderhoud aan BIMDWA
Wat zijn de mogelijkheden voor het koppelen van het beheer en onderhoud aan BIM? In opdracht van DWA deed Randy de Jong, student HBO Werktuigbouwkunde, in het kader van een stage, onderzoek naar deze vraag.
Allereerst beschreef hij wat er komt kijken bij het beheer en onderhoud van een gebouw. Op basis daarvan zijn eisen opgesteld voor de koppeling met BIM. Vervolgens is er onderzoek gedaan naar beheer en onderhoud in combinatie met BIM en welke bedrijven zich hiermee bezighouden. Deze bedrijven zijn gecontacteerd en hen is gevraagd naar diverse productspecifieke toepassingen. Het gaat om:
•Planon
•Cad&Company
•De Revit server
•Autodesk BIM 360
•Stabiplan
•BIMserver van de TNO
•ArtrA
In deze workshop wordt u meegenomen in het wezen van het Bouw Informatie Model, een van de exponenten van de razendsnel evoluerende informatietechnologie. De oplossingen van marktleider Autodesk zullen benoemd worden, met nadruk op de laagdrempelige en visuele toepassingen voor de nieuwe media. Naast de technische aspecten zullen onderwerpen als databeheer, slim datagebruik en een veranderende bedrijfsorganisatie centraal staan. Uiteindelijk zijn dit namelijk de meest wezenlijke aspecten voor een succesvolle toepassing van BIM technologieën. BIM wordt inmiddels veelvuldig toegepast, maar wat zijn nou de échte voordelen? En wat zijn de valkuilen waarop geanticipeerd moet worden? Ook de selectie van de gewenste medewerkers wordt benoemd, waarbij een interessante vergelijking wordt gemaakt voor de diverse generaties.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Masterclass Kwaliteitsnetwerk Bouw: "BIM in relatie tot kwaliteitsmanagement"nielssmit
Wij kijken terug op een zeer leuke en informatieve Masterclass van het Kwaliteitsnetwerk Bouw waar volop informatie is uitgewisseld en een ieders netwerk is uitgebreid. Hierbij de presentatie.
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
2006-11-28 - Tour d'IT - Mobiele BedrijfstoepassingenJaap van Ekris
Presentation about the possibilities of Mobile devices in both a usage as well as a development viewpoint. Goal is to make managers aware of the potential of mobile devices.
Current update about integrated BIM and BIM manifest presented during an event organized by ADEB-VBA. A number of customer cases are presented by Besix, Buro II architects, deBIMspecialist, etc.
By Cloudalize. Virtual workspaces for BIM. www.gdaas.com
Building Information Modelling (BIM) is drastically reshaping methods and procedures in construction industry, not only in Belgium, but in whole Europe and the entire world. BIM is not just a new trend, it is a
paradigm shift supported by an entirely new way of thinking and doing.
ECPPM Keynote: don't forget about data consumptionLéon Berlo
Slides of the ECPPM Trondheim keynote titles "Don't forget about import".
This shows the future vision of buildingSMART standards and solutions, and the pathway to get from today's situation to that future.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Technologie evolueert steeds sneller. Op alle niveaus van het ontwerp worden we uitgedaagd door steeds meer geavanceerde digitale technologieën, soms geleend uit andere bedrijfstakken. Het ontwerpproces en de enorme hoeveelheid informatie die beschikbaar is om te manipuleren en te verkennen is eindeloos.
Building information Modeling is een proces. Sterker nog, momenteel is het voor veel bedrijven een veranderproces. Dat geldt ook voor u, de architect, de ingenieur, de aannemer en toeleverancier. We hebben er allemaal mee te maken.
Masterclass Kwaliteitsnetwerk Bouw: "BIM in relatie tot kwaliteitsmanagement"nielssmit
Wij kijken terug op een zeer leuke en informatieve Masterclass van het Kwaliteitsnetwerk Bouw waar volop informatie is uitgewisseld en een ieders netwerk is uitgebreid. Hierbij de presentatie.
BIM State-of-the-Art (IE-Net Studiedag 16 Oktober 2013)Stefan Boeykens
Overview presentation (in Dutch) that was assembled in the context of a regional, Flemish workshop in October 2013, oriented to practitioners from the Construction Industry.
2006-11-28 - Tour d'IT - Mobiele BedrijfstoepassingenJaap van Ekris
Presentation about the possibilities of Mobile devices in both a usage as well as a development viewpoint. Goal is to make managers aware of the potential of mobile devices.
Current update about integrated BIM and BIM manifest presented during an event organized by ADEB-VBA. A number of customer cases are presented by Besix, Buro II architects, deBIMspecialist, etc.
By Cloudalize. Virtual workspaces for BIM. www.gdaas.com
Building Information Modelling (BIM) is drastically reshaping methods and procedures in construction industry, not only in Belgium, but in whole Europe and the entire world. BIM is not just a new trend, it is a
paradigm shift supported by an entirely new way of thinking and doing.
ECPPM Keynote: don't forget about data consumptionLéon Berlo
Slides of the ECPPM Trondheim keynote titles "Don't forget about import".
This shows the future vision of buildingSMART standards and solutions, and the pathway to get from today's situation to that future.
20200903 The 2020 buildingSMART Data Dictionary prototype (bSDD)Léon Berlo
The document discusses buildingSMART's Data Dictionary (bSDD) Version 5 API. It provides a safe harbour statement noting forward-looking statements are subject to risks and uncertainties. It lists reasons for a new bSDD as usability, new insights from use cases, and updated standards. It then discusses various aspects of bSDD including spatial structure, object types like buildings and classifications, the use of IFC and property sets, and hosting and using bSDD.
November 26, 2019
IFC needs to become more modulair (again). These slides present the first consensus on how to do that, and shares some questions that need to be answered.
Collaboration with BIM: Stop being efficient, start being effectiveLéon Berlo
This document discusses moving from being efficient to being effective in building information modeling (BIM) projects. It provides examples of highly detailed BIM projects using IFC data formats for modeling, quotations, rule checking, logistics, fire safety analysis, and simulations. Lessons learned include not letting the means become the goal, that data alone does not equal collaboration, and data is only useful when used effectively. The future of construction is predicted to have more available data, automation through robotics and niche applications, and a greater need for knowledge of both engineering and data. Organizations must learn to work effectively with increasingly complex technologies and changing processes rather than just focusing on efficiency.
GEO Desing + BIM Conference: Data sharing is not collaborationLéon Berlo
Shared data and BIM models are not the same as collaboration. A shared data model refers to creating agreements on how data will be standardized and shared, not shared databases or model instances. True collaboration requires each party to focus first on their own work and understanding what information others need from them, rather than assuming shared access to data leads automatically to collaboration. Technology like cloud computing and work sharing supports coordination but does not replace the need for professionals to bring their expertise and craftsmanship to cooperatively solve problems.
20181012 Collaborative Design and Engineering with IFCLéon Berlo
Collaborative Design and Engineering discusses the history and current practice of BIM collaboration and possible future directions. It notes that currently there is a split between policymakers who see BIM as a goal and practitioners who see it as a tool. The document advocates that mandating standards often lags practice and that collaboration is best achieved by focusing on stakeholders' actual needs rather than imposing top-down requirements. It provides examples of large successful collaborative BIM projects in the Netherlands that worked without formal standards by prioritizing data sharing through open standards.
This document discusses the differences and similarities between CityGML and BIM (Building Information Modeling) standards. Both use 3D primitives to represent building components but CityGML focuses on observable surfaces while BIM uses solid geometry. It describes an attempt called GEOBIM ADE to extend CityGML to include more BIM-level detail. However, the prototype had issues with geometry and file sizes and was not widely adopted. Current research still focuses more on geometry and visualization rather than practical applications.
2017 Q1 - BIMserver introduction and overviewLéon Berlo
BIMserver.org introduction and overview. The background, architecture and vision of the platform. Also examples of products that use (or are based on) BIMserver.
This document discusses BIM bots, which are autonomous programs that can extract and apply knowledge from Building Information Modeling (BIM) data without human interaction. BIM bots have characteristics like running independently on their own servers, working automatically, and returning results without interference. Common uses of BIM bots include simulations, coordination, validation, and knowledge mining from BIM data. The document provides examples of existing BIM bots and implications like automating knowledge extraction and allowing for data flows between different bots during work.
FACILITATING THE BIM COORDINATOR WITH AUTOMATED DATA COMPLIANCE CHECKINGLéon Berlo
FACILITATING THE BIM COORDINATOR WITH AUTOMATED DATA COMPLIANCE CHECKING.
Presentatie voor de 'expersessie' tijdens de BuildingSMART Benelux workshop over de 'Informatie Levering specificatie'
2 juni 2016 te Ede
The document discusses innovations in using building information modeling (BIM) data. It describes how the Elasstic platform aims to automate the interaction between BIM data and BIM simulations to enable faster design iteration, better performance insight, and an ecosystem for smaller applications. Key features of Elasstic BIM include running individual simulations on separate servers, automating the process to obtain knowledge/results earlier, using open standards, and having agreements on data interfacing.
This document discusses the future of building information modeling (BIM) and the need to move beyond centralized BIM platforms and models. It argues that true integration will not come from getting all stakeholders onto a single "island" or platform, but rather from connecting specialized tools and data sources in a decentralized manner. The future of BIM lies in niche applications that can share data and interoperate to complete tasks, without requiring dependence on a single centralized system. This approach takes advantage of the fragmented nature of the industry and allows features from different sources to be combined.
20151112 CITA BIM Gathering Keynote DublinLéon Berlo
Leon van Berlo discusses collaborative engineering using Industry Foundation Classes (IFC). Some key points:
- IFC allows sharing of building information models through a common data format, enabling collaboration without a "central model."
- Past studies found using reference models with IFC lowered BIM competence needs and choosing tools based on engineering skills rather than specific software was preferred.
- True collaboration requires understanding what data others need rather than focusing on centralized platforms or standardized BIM execution plans.
- Current BIM practices often work well without top-down policies, instead relying on proven bottom-up approaches and letting high-level users guide discussions.
CIB W78 - Collaborative engineering with IFC in the NetherlandsLéon Berlo
Paper presentation about the use of openBIM (IFC, BCF, etc) in the Netherlands. The presentations shows the process phases of a BIM project and the collaboration iteration cycles.
Paper is online at http://www.stumico.nl/wp-content/uploads/2015_CIB-W078_Collaborative_Engineering.pdf