2
•Download as PPT, PDF•
0 likes•550 views
The document discusses different network topologies and transmission modes. It includes figures illustrating point-to-point, multipoint, mesh, star, tree, bus, ring and hybrid network topologies. Transmission modes such as simplex, half-duplex, and full-duplex are also examined.
Report
Share
Report
Share
![Chapter 2 Basic Concepts ,[object Object],[object Object],[object Object],[object Object],[object Object],WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998](https://image.slidesharecdn.com/2-120126001410-phpapp02/85/2-1-320.jpg)
Recommended
Data Communication - Basic Concept
The document discusses basic networking concepts including line configurations, topologies, transmission modes, categories of networks, and internetworks. It provides figures illustrating point-to-point and multipoint line configurations as well as examples of mesh, star, tree, bus, ring, and hybrid network topologies.
Upper OSI LAYER
This document contains figures and descriptions about the upper layers of the OSI model including the session layer, presentation layer, and application layer. It discusses session layer communication and synchronization, presentation layer functions like translation and encryption/decryption methods, and application layer protocols for messaging like MHS and virtual terminal access.
Introduction to computer network
The document describes the OSI model and TCP/IP protocol suite. It discusses the seven layers of the OSI model from physical layer to application layer. It then explains how the TCP/IP protocol suite maps to the OSI layers and describes addressing in TCP/IP, including physical, internet (IP) and port addresses. It concludes by mentioning the different versions of TCP/IP, including the current version 4 and future version 6.
Ch03 1
The document discusses the OSI model, which structures network communication into 7 layers, with each layer responsible for specific functions. It describes the model itself and provides figures illustrating the layers of the OSI model, how data moves between layers during network exchange, and examples of the functions of the physical, data link, and network layers.
Ch03 1
The document discusses the OSI model, describing its layers and functions. It includes figures illustrating the OSI model, the layers, an example exchange using the model, and diagrams of the physical layer, data link layer, data link layer example, and network layer.
Topology
The document discusses different network topologies including mesh, star, tree, bus, ring, and hybrid. A mesh topology connects all nodes to each other in a point-to-point configuration. A star topology connects all nodes to a central hub device. A tree topology connects nodes in a hierarchical structure similar to a bus topology with a star configuration. A ring topology connects all nodes to each other in a circular configuration but if one node fails the whole network fails. A hybrid topology combines elements of different topologies to meet the requirements of dividing large amounts of work between departments.
Dynamic design and simulation analysis of permanent magnet motor in different...
This paper deals with investigation on non purely sinusoidal input supply analysis of line-start PMM using finite element analysis (FEA), in the present times a greater awareness is generated by the problems of harmonic voltages and currents produced by non-linear loads like the power electronic converters. These combine with non-linear nature of PMM core and produce severe distortions in voltages and currents and increase the power loss, additional copper losses due to harmonic currents, increased core losses, electromagnetic interference with communication circuits, efficiency reduction, increased in motors temperature and torque oscillations. In addition to the operation of PMM on the sinusoidal supplies, the harmonic behavior becomes important as the size and rating of the PMM increases. Thus the study of harmonics is of great practical significance in the operation of PMM.
Recommended
Data Communication - Basic Concept
The document discusses basic networking concepts including line configurations, topologies, transmission modes, categories of networks, and internetworks. It provides figures illustrating point-to-point and multipoint line configurations as well as examples of mesh, star, tree, bus, ring, and hybrid network topologies.
Upper OSI LAYER
This document contains figures and descriptions about the upper layers of the OSI model including the session layer, presentation layer, and application layer. It discusses session layer communication and synchronization, presentation layer functions like translation and encryption/decryption methods, and application layer protocols for messaging like MHS and virtual terminal access.
Introduction to computer network
The document describes the OSI model and TCP/IP protocol suite. It discusses the seven layers of the OSI model from physical layer to application layer. It then explains how the TCP/IP protocol suite maps to the OSI layers and describes addressing in TCP/IP, including physical, internet (IP) and port addresses. It concludes by mentioning the different versions of TCP/IP, including the current version 4 and future version 6.
Ch03 1
The document discusses the OSI model, which structures network communication into 7 layers, with each layer responsible for specific functions. It describes the model itself and provides figures illustrating the layers of the OSI model, how data moves between layers during network exchange, and examples of the functions of the physical, data link, and network layers.
Ch03 1
The document discusses the OSI model, describing its layers and functions. It includes figures illustrating the OSI model, the layers, an example exchange using the model, and diagrams of the physical layer, data link layer, data link layer example, and network layer.
Topology
The document discusses different network topologies including mesh, star, tree, bus, ring, and hybrid. A mesh topology connects all nodes to each other in a point-to-point configuration. A star topology connects all nodes to a central hub device. A tree topology connects nodes in a hierarchical structure similar to a bus topology with a star configuration. A ring topology connects all nodes to each other in a circular configuration but if one node fails the whole network fails. A hybrid topology combines elements of different topologies to meet the requirements of dividing large amounts of work between departments.
Dynamic design and simulation analysis of permanent magnet motor in different...
This paper deals with investigation on non purely sinusoidal input supply analysis of line-start PMM using finite element analysis (FEA), in the present times a greater awareness is generated by the problems of harmonic voltages and currents produced by non-linear loads like the power electronic converters. These combine with non-linear nature of PMM core and produce severe distortions in voltages and currents and increase the power loss, additional copper losses due to harmonic currents, increased core losses, electromagnetic interference with communication circuits, efficiency reduction, increased in motors temperature and torque oscillations. In addition to the operation of PMM on the sinusoidal supplies, the harmonic behavior becomes important as the size and rating of the PMM increases. Thus the study of harmonics is of great practical significance in the operation of PMM.
ECIO_Poster_ShaneDuggan
This document summarizes research on a device design for vertically coupling an active waveguide and a passive waveguide. It describes using a tapered transition region to efficiently transfer power between the waveguides. Beam propagation method simulations show over 200% increased power output when using a three waveguide structure with an intermediate waveguide, compared to a two waveguide structure. Future work will involve testing a proposed pinip doping structure and fabricating a prototype device.
Effect of Scattering Parameters On MIMO System Capacity
This document discusses the effect of scattering parameters on the capacity of MIMO systems. It begins by introducing MIMO systems and noting that capacity can be increased by adding more antennas, but scattering parameters also influence capacity. A 2x2 MIMO antenna system is designed and simulated to obtain scattering parameters. Equations showing how scattering parameters relate to signal correlation and MIMO capacity are presented. Plots from the antenna simulation show return loss and radiation patterns. Additional plots compare the capacity of independent and correlated 2x2 MIMO channels with varying SNR levels, demonstrating capacity reduction from scattering parameters. The document concludes by quantifying the percentage decrease in capacity for the 2x2 MIMO system due to scattering effects.
Ch07 1
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode fiber.
Data Link Protocols in Data Communication DC22
The document discusses different types of data link protocols including asynchronous and synchronous protocols as well as character-oriented and bit-oriented protocols. It provides figures illustrating examples of data link protocols such as XMODEM and how frames are structured in simple, multiblock, and multiframe transmissions. Control frames and byte stuffing techniques are also examined.
Connectors in Data Communication DC12
The document discusses various telecommunications topics including data transmission connectors, balanced and unbalanced transmission modes, canceling noise, modem standards, and modulation techniques. It includes figures and diagrams related to these topics without further description.
basic structured-grid-generation
The document provides an introduction to vector and tensor analysis concepts that form the mathematical basis of structured grid generation. It defines curvilinear coordinate systems and describes how to represent position vectors and define base vectors in three-dimensional Euclidean space using these coordinate systems. It also introduces metric tensors, line/area/volume elements, generalized vectors/tensors, Christoffel symbols, covariant differentiation, and other tensor calculus concepts that are important for grid generation applications.
Ch13
This document discusses two metropolitan area network technologies: IEEE 802.6 DQDB and SMDS. DQDB uses a dual-bus topology with distributed queues to transmit data between nodes. It employs reservation tokens to control access to the buses. SMDS is a switched network that connects local area networks using T-carrier telephone lines. The document includes several figures illustrating aspects of how DQDB and SMDS are structured and operate.
Ch13
This document discusses two metropolitan area network technologies: IEEE 802.6 DQDB and SMDS. DQDB uses a dual-bus topology with distributed queues to transmit data between nodes. It employs reservation tokens to control access to the buses. SMDS is a switched network that connects local area networks using T-carrier telephone lines. The document includes several figures illustrating aspects of how DQDB and SMDS are structured and operate.
Local Area Networks in Data Communication DC24
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch12 1
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch12 1
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch07 1
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode. The document appears to be from a textbook or manual covering telecommunications network cabling.
Transmission Media in Data Communication DC13
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode fiber.
Ch02 2
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet). Each figure is accompanied by a brief caption but there is no other accompanying text.
Ch02 2
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet), without providing any additional context or explanation for the figures and network types.
3
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet), without providing any additional context or explanation for the figures and network types.
Transmission Media
The document discusses different types of transmission media, including guided media like twisted-pair cable, coaxial cable, and optical fiber, as well as unguided media like radio waves. It includes sections on topics like electromagnetic spectrum, how different cable types transmit signals, fiber optic concepts like refraction and reflection, and fiber types including multimode and single mode. Diagrams and figures are referenced throughout to illustrate key concepts.
Networking and Networking Devices
The document discusses different networking and internetworking devices such as repeaters, bridges, routers, and switches. It provides figures illustrating how these devices operate at the OSI model layers and how they function to connect and route data between different devices and networks. The document also covers distance vector and link state routing protocols, providing examples of how routing tables are calculated and updated between routers using these different algorithms.
Transmission Mode
This document contains figures and captions about different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks, but provides no additional context or explanation for the figures.
Basic Concepts in Data Communication DC1
This document discusses different network topologies and transmission modes. It includes figures and descriptions of point-to-point and multipoint line configurations as well as mesh, star, tree, bus, ring and hybrid network topologies. Transmission modes such as simplex, half-duplex, and full-duplex are also examined.
TCP/IP
The document is a chapter about TCP/IP that contains 15 figures illustrating concepts related to TCP/IP such as how the internet is structured according to TCP/IP, how TCP/IP relates to the OSI model, the format of IP datagrams and addresses, classes of IP addresses, subnetting, ARP, port addresses, and the format of UDP and TCP packets.
DATA Link Control
This document discusses chapter 10 on data link control, which covers line discipline, flow control, and error control at the data link layer. It includes figures illustrating data link layer functions like ENQ/ACK flow control, multipoint discipline using select and poll commands, and error detection using checksums.
More Related Content
What's hot
ECIO_Poster_ShaneDuggan
This document summarizes research on a device design for vertically coupling an active waveguide and a passive waveguide. It describes using a tapered transition region to efficiently transfer power between the waveguides. Beam propagation method simulations show over 200% increased power output when using a three waveguide structure with an intermediate waveguide, compared to a two waveguide structure. Future work will involve testing a proposed pinip doping structure and fabricating a prototype device.
Effect of Scattering Parameters On MIMO System Capacity
This document discusses the effect of scattering parameters on the capacity of MIMO systems. It begins by introducing MIMO systems and noting that capacity can be increased by adding more antennas, but scattering parameters also influence capacity. A 2x2 MIMO antenna system is designed and simulated to obtain scattering parameters. Equations showing how scattering parameters relate to signal correlation and MIMO capacity are presented. Plots from the antenna simulation show return loss and radiation patterns. Additional plots compare the capacity of independent and correlated 2x2 MIMO channels with varying SNR levels, demonstrating capacity reduction from scattering parameters. The document concludes by quantifying the percentage decrease in capacity for the 2x2 MIMO system due to scattering effects.
Ch07 1
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode fiber.
Data Link Protocols in Data Communication DC22
The document discusses different types of data link protocols including asynchronous and synchronous protocols as well as character-oriented and bit-oriented protocols. It provides figures illustrating examples of data link protocols such as XMODEM and how frames are structured in simple, multiblock, and multiframe transmissions. Control frames and byte stuffing techniques are also examined.
Connectors in Data Communication DC12
The document discusses various telecommunications topics including data transmission connectors, balanced and unbalanced transmission modes, canceling noise, modem standards, and modulation techniques. It includes figures and diagrams related to these topics without further description.
basic structured-grid-generation
The document provides an introduction to vector and tensor analysis concepts that form the mathematical basis of structured grid generation. It defines curvilinear coordinate systems and describes how to represent position vectors and define base vectors in three-dimensional Euclidean space using these coordinate systems. It also introduces metric tensors, line/area/volume elements, generalized vectors/tensors, Christoffel symbols, covariant differentiation, and other tensor calculus concepts that are important for grid generation applications.
What's hot (6)
Effect of Scattering Parameters On MIMO System Capacity
Effect of Scattering Parameters On MIMO System Capacity
Similar to 2
Ch13
This document discusses two metropolitan area network technologies: IEEE 802.6 DQDB and SMDS. DQDB uses a dual-bus topology with distributed queues to transmit data between nodes. It employs reservation tokens to control access to the buses. SMDS is a switched network that connects local area networks using T-carrier telephone lines. The document includes several figures illustrating aspects of how DQDB and SMDS are structured and operate.
Ch13
This document discusses two metropolitan area network technologies: IEEE 802.6 DQDB and SMDS. DQDB uses a dual-bus topology with distributed queues to transmit data between nodes. It employs reservation tokens to control access to the buses. SMDS is a switched network that connects local area networks using T-carrier telephone lines. The document includes several figures illustrating aspects of how DQDB and SMDS are structured and operate.
Local Area Networks in Data Communication DC24
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch12 1
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch12 1
The document discusses local area network technologies including Ethernet, Token Ring, and FDDI. It includes figures illustrating the OSI model, Project 802 standards, PDU format, CSMA/CD evolution, Ethernet segments, various Ethernet implementations such as 10BASE5, 10BASE2, 10BASET, and transceiver components.
Ch07 1
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode. The document appears to be from a textbook or manual covering telecommunications network cabling.
Transmission Media in Data Communication DC13
The document discusses different types of transmission media including guided and unguided media. It provides figures and descriptions of various guided media such as twisted-pair cable, coaxial cable, and optical fiber. It explains concepts such as refraction, critical angle, reflection, and different types of optical fibers including multimode step-index, multimode graded-index, and single mode fiber.
Ch02 2
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet). Each figure is accompanied by a brief caption but there is no other accompanying text.
Ch02 2
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet), without providing any additional context or explanation for the figures and network types.
3
The document contains copyrighted figures and descriptions of different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks (the Internet), without providing any additional context or explanation for the figures and network types.
Transmission Media
The document discusses different types of transmission media, including guided media like twisted-pair cable, coaxial cable, and optical fiber, as well as unguided media like radio waves. It includes sections on topics like electromagnetic spectrum, how different cable types transmit signals, fiber optic concepts like refraction and reflection, and fiber types including multimode and single mode. Diagrams and figures are referenced throughout to illustrate key concepts.
Networking and Networking Devices
The document discusses different networking and internetworking devices such as repeaters, bridges, routers, and switches. It provides figures illustrating how these devices operate at the OSI model layers and how they function to connect and route data between different devices and networks. The document also covers distance vector and link state routing protocols, providing examples of how routing tables are calculated and updated between routers using these different algorithms.
Transmission Mode
This document contains figures and captions about different types of computer networks including simplex, half-duplex, full-duplex, local area networks, metropolitan area networks, wide area networks, and internetworks, but provides no additional context or explanation for the figures.
Basic Concepts in Data Communication DC1
This document discusses different network topologies and transmission modes. It includes figures and descriptions of point-to-point and multipoint line configurations as well as mesh, star, tree, bus, ring and hybrid network topologies. Transmission modes such as simplex, half-duplex, and full-duplex are also examined.
TCP/IP
The document is a chapter about TCP/IP that contains 15 figures illustrating concepts related to TCP/IP such as how the internet is structured according to TCP/IP, how TCP/IP relates to the OSI model, the format of IP datagrams and addresses, classes of IP addresses, subnetting, ARP, port addresses, and the format of UDP and TCP packets.
DATA Link Control
This document discusses chapter 10 on data link control, which covers line discipline, flow control, and error control at the data link layer. It includes figures illustrating data link layer functions like ENQ/ACK flow control, multipoint discipline using select and poll commands, and error detection using checksums.
Man
The document discusses metropolitan area networks and covers three main topics: IEEE 802.6, DQDB (Distributed Queues, Dual Bus) network architecture, and SMDS (Switched Megabit Data Services). DQDB uses dual counter-rotating rings to connect nodes and transmit data packets using a reservation token system with distributed queues. SMDS provides switched connections for connecting local area networks over wide-area networks.
Switching
The document discusses different methods for switching in telecommunications networks, including circuit switching, packet switching, and message switching. It provides figures illustrating circuit-switched networks, various switch designs like crossbar and multistage switches, and time-division multiplexing with and without time-slot interchange. Packet switching techniques like the datagram approach and switched virtual circuits are depicted. Message switching is also mentioned.
Switching
The document discusses different methods for switching in telecommunications networks, including circuit switching, packet switching, and message switching. It provides figures illustrating circuit-switched networks, various switch designs like crossbar and multistage switches, and time-division multiplexing with and without time-slot interchange. Packet switching techniques like the datagram approach and switched virtual circuits are depicted. Message switching is also mentioned.
13 ethernet
The document discusses local area network (LAN) technologies including Ethernet, Token Ring, and FDDI. It describes the OSI model and Project 802 which established standards for LANs. Ethernet uses CSMA/CD access method and has evolved from thick to thin to twisted-pair cable. Token Ring uses a token passing method where a special packet is passed between nodes for transmission rights. FDDI provides a fiber-optic dual-ring topology for high-speed transmission over greater distances.
Similar to 2 (20)
More from idris01111
Vlsi 2
The document describes the key steps in CMOS fabrication:
1. A p-type substrate is used, and n-well regions are defined through implantation to create isolation for p-MOSFETs.
2. Active device regions and field oxide isolation are then patterned, followed by gate oxide growth and polysilicon deposition.
3. Self-aligned implantation creates n-type and p-type source/drain regions. Additional metallization layers connect the transistors.
Vlsi 1
The document summarizes the key steps in the n-well CMOS fabrication process:
1) An n-well region is created in a p-type substrate through impurity implantation to form the pMOS transistor.
2) A thick oxide is grown around the nMOS and pMOS active regions, and a thin gate oxide is grown on the active regions.
3) Polysilicon is deposited and patterned to form gates, and n-type and p-type regions are implanted to form sources, drains and channels.
4) Interconnect layers are added through metallization to complete the fabrication process.
10
The document contains captions and copyright notices for over 30 figures related to topics in digital signal processing and communication systems. The figures cover concepts such as analog to digital encoding, pulse amplitude modulation, pulse code modulation, digital to analog encoding, amplitude shift keying, frequency shift keying, phase shift keying, quadrature amplitude modulation, bit rates, baud rates, and Nyquist sampling theorem.
10
The document contains captions and copyright notices for over 30 figures related to topics in digital signal processing and communication systems. Specifically, the figures cover topics such as analog to digital encoding, pulse amplitude modulation, pulse code modulation, digital modulation techniques including ASK, FSK, PSK, and various QAM constellations, and relationships between bit rate and baud rate.
9
This chapter discusses various methods for encoding analog and digital signals for transmission, including different conversion schemes such as analog to digital and digital to digital. It examines encoding techniques like unipolar, polar, NRZ-L, NRZ-I, RZ, Manchester, bipolar AMI, B8ZS, and HDB3 encoding. The chapter also includes examples and solutions related to signal encoding.
8
The document contains copyright information and citations for 26 figures from The McGraw-Hill Companies' 1998 publication relating to signal analysis concepts such as DC components, complex waveforms, bandwidth, digital signals, harmonics, spectrums, bit rates, and examples of bandwidth and data rate relationships.
7
The document contains captions for 12 figures from a 1998 McGraw-Hill textbook. The captions discuss various properties of waves including their phases, amplitude changes, frequency changes, phase changes, and examples of waves in the time and frequency domains.
6
This document discusses different types of signals including analog and digital signals as well as periodic and aperiodic signals. It includes figures showing the transformation of information to signals, examples of analog and digital clocks, definitions of analog and digital signals, periodic signals represented by a sine wave, and the definition of aperiodic signals.
5
The document contains captions and copyright notices for 14 figures from a textbook about computer networking. The figures relate to examples and explanations of the network, transport, session, presentation and application layers of the OSI model.
4
The document discusses the OSI model, describing its layers and functions. It includes figures illustrating the OSI model, the layers, an example exchange using the model, and diagrams of the physical, data link, and network layers.
Recently uploaded
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
2
- 2. Figure 2-1 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998
- 3. Figure 2-2 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Point-to-Point Line Configuration
- 4. Figure 2-2-continued WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Point-to-Point Line Configuration
- 5. Figure 2-2-continued WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Point-to-Point Line Configuration
- 6. Figure 2-3 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Multipoint Line Configuration
- 7. Figure 2-4 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998
- 8. Figure 2-5 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Mesh Topology
- 9. Figure 2-6 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Star Topology
- 10. Figure 2-7 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Tree Topology
- 11. Figure 2-8 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Bus Topology
- 12. Figure 2-9 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Ring Topology
- 13. Figure 2-10 WCB/McGraw-Hill The McGraw-Hill Companies, Inc., 1998 Hybrid Topology