2:1 design gearbox spiral bevel, 125 hp in line reducing gear box clockwise rotation, 65 hp groovers 90 degree gearbox 2000 rpm,right angle precision gearboxes 1:1 ratio Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
DATE: 2019.05
- Design of a gearbox as a power transmission system
- Calculation of mechanical design parameters
- Mechanical design process
- Bearing selection from a given catalog
- Using ISO standards for a mechanical design process
In this project, a suitable gearbox is designed, and bearings are selected for the given prime mover in a screw conveyor machine. Screw conveyors are used for granular material transporting applications such as wheat. The granular medium can be transported efficiently to any desired position, ie. horizontal, vertical or sloped position.
Design and fabrication of gearbox with inboard braking of an all terrain vehicleabdul mohammad
Â
We design, build and test an off-road race vehicle each year. During this season, a customized gearbox with inboard braking is typically designed as a reduction after the Continuously Variable Transmission. A preliminary design was first prepared keeping in the mind, the guidelines and rules issued by SAE. Indian standards for driver space and ergonomic preference transmission type was selected and designed according to requirements of the driver. Hence after ensuring safety, the design was finalised and fabricate it. Moreover, the axle braking is to slow down or stop the vehicle safely and effectively by converting kinetic energy into heat. It is the one of the main safety of a vehicle. The goal of the project is to develop a lightweight, compact gear reduction that will increase the efficiency and durability of the vehicle. And also, in addition we have provided hydraulic braking for the drive shaft (i.e. known as inboard braking) for which the calliper is mounted to the gearbox itself. The pedal must actuate the master cylinder without any usage of cables and should be capable of locking four wheels in static condition and dynamically on paved and unpaved surfaces. While designing a brake system for a vehicle that can produce adequate braking force to meet competition regulations while being as light as possible. A budget, timeline, proof of design, fabrication and testing will also incorporate in the report.
DESIGN AND FABRICATION OF SINGLE REDUCTION GEARBOX WITH INBOARD BRAKINGabdul mohammad
Â
An inboard braking system is an automobile technology where in the disc brakes are mounted on the chassis or to the gearbox of the vehicle, rather than directly on the wheel hubs.
The main advantages are a reduction in the unsprung weight of the wheel hubs, as this no longer includes the brake discs and calipers; also, braking torque applies directly to the chassis or the gear box , rather than being taken through the suspension arms.
Inboard brakes are fitted to a driven axle of the car, as they require a drive shaft to link the wheel to the brake. Most have thus been used for rear-wheel drive cars, although four-wheel drive and some front-wheel drives have also used them.
Design mini-project for TY mechanical studentsRavindra Shinde
Â
In these project, we have designed a lifting table suitable to use in college  . By adjusting the height of table any student can have proper sitting posture and position. It is also helpful for programmers/coders who have to seat for a long time, by having such a table they can do coding in a standing position too.
Design and Fabrication of a 3U CubeSat - Capstone ProjectStasik Nemirovsky
Â
This report presents a final overview of the design and development of a 3U CubeSat, from the problem statement phase to the manufacturing, testing, and performance assessment of a working prototype. The client’s (McGill Rocket Team) requirements were thoroughly accounted for and respected throughout the stages of this design project.
DATE: 2019.05
- Design of a gearbox as a power transmission system
- Calculation of mechanical design parameters
- Mechanical design process
- Bearing selection from a given catalog
- Using ISO standards for a mechanical design process
In this project, a suitable gearbox is designed, and bearings are selected for the given prime mover in a screw conveyor machine. Screw conveyors are used for granular material transporting applications such as wheat. The granular medium can be transported efficiently to any desired position, ie. horizontal, vertical or sloped position.
Design and fabrication of gearbox with inboard braking of an all terrain vehicleabdul mohammad
Â
We design, build and test an off-road race vehicle each year. During this season, a customized gearbox with inboard braking is typically designed as a reduction after the Continuously Variable Transmission. A preliminary design was first prepared keeping in the mind, the guidelines and rules issued by SAE. Indian standards for driver space and ergonomic preference transmission type was selected and designed according to requirements of the driver. Hence after ensuring safety, the design was finalised and fabricate it. Moreover, the axle braking is to slow down or stop the vehicle safely and effectively by converting kinetic energy into heat. It is the one of the main safety of a vehicle. The goal of the project is to develop a lightweight, compact gear reduction that will increase the efficiency and durability of the vehicle. And also, in addition we have provided hydraulic braking for the drive shaft (i.e. known as inboard braking) for which the calliper is mounted to the gearbox itself. The pedal must actuate the master cylinder without any usage of cables and should be capable of locking four wheels in static condition and dynamically on paved and unpaved surfaces. While designing a brake system for a vehicle that can produce adequate braking force to meet competition regulations while being as light as possible. A budget, timeline, proof of design, fabrication and testing will also incorporate in the report.
DESIGN AND FABRICATION OF SINGLE REDUCTION GEARBOX WITH INBOARD BRAKINGabdul mohammad
Â
An inboard braking system is an automobile technology where in the disc brakes are mounted on the chassis or to the gearbox of the vehicle, rather than directly on the wheel hubs.
The main advantages are a reduction in the unsprung weight of the wheel hubs, as this no longer includes the brake discs and calipers; also, braking torque applies directly to the chassis or the gear box , rather than being taken through the suspension arms.
Inboard brakes are fitted to a driven axle of the car, as they require a drive shaft to link the wheel to the brake. Most have thus been used for rear-wheel drive cars, although four-wheel drive and some front-wheel drives have also used them.
Design mini-project for TY mechanical studentsRavindra Shinde
Â
In these project, we have designed a lifting table suitable to use in college  . By adjusting the height of table any student can have proper sitting posture and position. It is also helpful for programmers/coders who have to seat for a long time, by having such a table they can do coding in a standing position too.
Design and Fabrication of a 3U CubeSat - Capstone ProjectStasik Nemirovsky
Â
This report presents a final overview of the design and development of a 3U CubeSat, from the problem statement phase to the manufacturing, testing, and performance assessment of a working prototype. The client’s (McGill Rocket Team) requirements were thoroughly accounted for and respected throughout the stages of this design project.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
design and fabrication ofGear cutting attachment in lathe machineabes ec
Â
In Today’s Fast Life Every One Wants To Save Time And Money, Even Small Scale Industrialist Wants To Earn More Profits With Given Limited Resources .Due To The Globalization The Competition Is Increasing Day By Day, Especially Micro Industries Is Facing Lot Of Trouble To Sustain In Throat Cutting Competition. So We Came Up With An Idea Of Saving Money By Desginning And Fabritacting of Attachment of gear cutting in lathe Which Can Save Money Of Small Industrialist By Avoiding The Subcontarction Of Works Which May Required Specail Machines .
Design & Optimization of Equipment for Insertion of Tube Bundle of Heat Excha...IJMER
Â
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
This is a Major Project Report successfully done at DVRCET under the guidance of Mechanical Engineering Department & the Managing Director of NIRAJA TECHNOLOGIES located at Uppal (Hyderabad).
in this u will come to know about various processes involved in manufacturing of gears and also get the experience how to make slide show on training reports.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
design and fabrication ofGear cutting attachment in lathe machineabes ec
Â
In Today’s Fast Life Every One Wants To Save Time And Money, Even Small Scale Industrialist Wants To Earn More Profits With Given Limited Resources .Due To The Globalization The Competition Is Increasing Day By Day, Especially Micro Industries Is Facing Lot Of Trouble To Sustain In Throat Cutting Competition. So We Came Up With An Idea Of Saving Money By Desginning And Fabritacting of Attachment of gear cutting in lathe Which Can Save Money Of Small Industrialist By Avoiding The Subcontarction Of Works Which May Required Specail Machines .
Design & Optimization of Equipment for Insertion of Tube Bundle of Heat Excha...IJMER
Â
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
This is a Major Project Report successfully done at DVRCET under the guidance of Mechanical Engineering Department & the Managing Director of NIRAJA TECHNOLOGIES located at Uppal (Hyderabad).
in this u will come to know about various processes involved in manufacturing of gears and also get the experience how to make slide show on training reports.
Similar to 2 1 design gearbox spiral bevel, 125 hp in line reducing gear box clockwise rotation, 65 hp groovers 90 degree gearbox 2000 rpm,right angle precision gearboxes 1 1 ratio suppliers, manufacturers
90 degree gearbox,90 degree bevel gearbox,90 degree 1:1 ratio gearbox,90 degree angle gear drives features:
1. 90 degree angle assembly spiral bevel gears.
2. Used to transmit rotary motion, mechanical power and torque.
3. Milled cubic body small sizes 65x65x65mm to 260x260x260mm.
4. High efficiency bevel gearbox, up to 98%.
5. Gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1, customized special gear ratio.
6. Input power from 0.05Kw to 157Kw. Drive torque from 11.56N.m to 1842N.m. Input and output speed from 50 to 1500Rpm (high speed gearbox, contact Jacton engineers).
7. 12mm to 60mm diameter input and output shaft, 8 types shaft arrangements and direction of shaft rotating. Shafts can be rotated in both forward and reverse direction. Clockwise and counter-clockwise rotation direction are available.
8. Soild shaft, hollow shaft and motor flange adapter are available.
9. horizontal mounting, overhung mounting or wall mounting are available.
10. 2 way gearbox, 3 way gearbox, 4 way gearbox are available.
11. low backlash 8 to 15 arcmin, quiet low noise less than 80dB under 1500rpm at 1 meter distance, low working temperature less than 50 degree centigrade.
12. application in printing press, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, satellite dish antennas, gate valve actuators, food processing, robotics, rubber processing, wrapping machine, solar panel, commercial mower, street sweeper, dual steering, bulkhead door opener, scissor lift, vertical pump drive, sand spreader, residential mower, car wash curtain, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader, business form press, feed screw drive, sewage conveyor, collating machinery, mixing equipment, conveyor drive, screw jack system, film processor and pottle packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to press, propel or raise, Jacton bevel gearbox is welcomed and ideal power transmission solution with all these industries.
90 degree gearbox with a 25mm shaft, bevel gearbox 9 mm drive shaft, 4:1 three way gear drive, right angle gearbox four-way Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
Shaft 90 degree angle changers, right angle 90 degree bevel gears drive, miter gearbox right angle, right angle 90 degree miter gears drive Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
90deg clockwise rotation gearbox, 90deg counterclockwise direction gearbox,90 degree 1:1 gear box, bevel gearbox 4 ways, 1:1 gear box 90 degree Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
agricultural right angle gearbox, ninety degree transmission drives, gear box bevel gear drive, hand crank right angle gearbox, 90 degree drive 1.5in. gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
gearbox power loss right angle gearbox, heavy duty miter gearbox 1:1 5/8 shaft, right angle bevel gear reducer iec input flange Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
Miter gear box 2:1, angle grinder gearbox ratio, 2 to 1 ratio right angle gearbox oil type, t gear miter box, small 90 degree gear box Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
heavy duty miter gearbox, right angle transmission gearbox, right angle gears 3:1 ratio gearbox, high speed 3/4" shaft right angle gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
1.5:1 ratio gearbox t series, 1inch input and 1inch output gearbox, right angle gearbox 1.5 to 1 ratio, right angle gear box, highest speed 90 degree bevel gear box Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
Right angle speed increaser 1:1.5, 90 degree gearbox pinion shaft, small right angle gear box,90 degree gearbox,gear reducer 90 degree Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
90 degree gear reducer, right angle drive shaft, bevel gear 90 degree 1/2" shaft, bevel gearbox reverse rotation, 5 to 1 gear ratio box with 1" shafts, power transmission right angle gearbox 5:1 Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
Spiral 4 speed in 90 degree drive,1 to 1 ration gearbox, bevel gearbox with one inch shaft,90 deg angle gears drive,90 degree gear drives,gear box 90 deg Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
Similar to 2 1 design gearbox spiral bevel, 125 hp in line reducing gear box clockwise rotation, 65 hp groovers 90 degree gearbox 2000 rpm,right angle precision gearboxes 1 1 ratio suppliers, manufacturers (14)
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
we are professional 2.5kn, 5kn, 10kn lightweight micro miniature screw jacks for aluminium can production lines in uk manufacturers and suppliers in China.
we are professional 1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, precision screw jack mechanical actuators, precision linear jack screw for precision straightener in usa manufacturers and suppliers in China.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
we are professional 5 ton theatre lifting stage jack, 10 ton acme screws stage and theatre lifts, 20 ton stage and orchestra platform lifts manufacturers and suppliers in China.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
DC 24V Geared Motor Screw Jack Actuator Hoisting Water Gates In Agricultural Industry In Malaysia
DC 24V Geared Motor driven actuator (screw jack) for water gate up/down movement, water gate length 7ft, width 53 Inches, weight 1.5 Tons. Stroke length 7 feet. DC 24V operated.
10T LOAD CAPACITY SCREW JACK ACTUATOR
Model: JTW-10T-IS-2500-L-II-C-PP/BB/LS
* Max. 10 ton load, lifting screw Tr58x12
* Inverted, translating screw, 7 ft stroke(2500mm deduct bellows retract length)
* Low worm gear ratio, 1/24, 0.5mm stroke per revolution of worms, double worms input
* Accessories include protective tube, bellows boots, limit switches, clevis end.
24V DC MOTOR WITH GEAR REDUCER
Model: 130ZYT105PX4A1
* 1Kw 3000rpm input dc motor
* Gear reducer with 1/4 reduction ratio
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Putting the SPARK into Virtual Training.pptxCynthia Clay
Â
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Â
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
Â
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Â
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1‪(218) 203-5951‬
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Memorandum Of Association Constitution of Company.pptseri bangash
Â
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Â
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Business Valuation Principles for EntrepreneursBen Wann
Â
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
Improving profitability for small businessBen Wann
Â
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Kseniya Leshchenko: Shared development support service model as the way to ma...Lviv Startup Club
Â
Kseniya Leshchenko: Shared development support service model as the way to make small projects with small budgets profitable for the company (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Kseniya Leshchenko: Shared development support service model as the way to ma...
Â
2 1 design gearbox spiral bevel, 125 hp in line reducing gear box clockwise rotation, 65 hp groovers 90 degree gearbox 2000 rpm,right angle precision gearboxes 1 1 ratio suppliers, manufacturers
1. JTV Series Miter Gearbox
Jacton Electromechanical Co.,Ltd
1
http://www.screw-jack.com
2. Contents
General information ------------------------------------------------------------------------------- 3
Configurations -------------------------------------------------------------------------------------- 4
Specifications
1. JTV65, JTV90, JTV120 ------------------------------------------------------------------------------ 5
2. JTV160, JTV200 -------------------------------------------------------------------------------------- 6
3. JTV260 ------------------------------------------------------------------------------------------------ 7
Selection Guide
1. Gearbox Series --------------------------------------------------------------------------------------- 8
2. Model -------------------------------------------------------------------------------------------------- 8
3. Gear Ratio --------------------------------------------------------------------------------------------- 8
4. Input & Output RPM ---------------------------------------------------------------------------------- 8
5. Shaft Arrangements And Direction Of Shaft Rotating ---------------------------------------------- 8-9
6. Mounting Position ------------------------------------------------------------------------------------- 9
Selection Examples-------------------------------------------------------------------------------- 10
Dimensions
1. Model JTV65 ----------------------------------------------------------------------------------------- 11
2. Model JTV90 ----------------------------------------------------------------------------------------- 12
3. Model JTV120 ---------------------------------------------------------------------------------------- 13
4. Model JTV160 ---------------------------------------------------------------------------------------- 14
5. Model JTV200 ---------------------------------------------------------------------------------------- 15
6. Model JTV260 ---------------------------------------------------------------------------------------- 16
Application Examples ---------------------------------------------------------------------------- 17
Operation Manual ---------------------------------------------------------------------------------- 18-19
Frequently Asked Questions ------------------------------------------------------------------- 20
Company History ----------------------------------------------------------------------------------- 21
Contact Us -------------------------------------------------------------------------------------------- 22
Jacton Electromechanical Co.,Ltd
2
http://www.screw-jack.com
3. General Information
Gearbox Features
* Cubic shape gearbox
* Used in pairs spiral bevel gear unit to transmit rotary motion, mechanical power and torque
* Transmission efficiency up to 98%
* 6 gearboxes models JTV65, JTV90, JTV120, JTV160, JTV200, JTV260
* Universal mounting positions, can be easily mounted in any direction
* Gear ratio 1:1, 1.5:1, 2:1, 3:1, 4:1, 5:1
* Power rating from 0.1Kw to 157kW
* Torque rating from 11.9Nm to 1841Nm
* Design life is 10000 hours
Shaft Configurations
* 2 way, 3 way and 4 way
* Solid shaft or hollow shaft
* Motor adapter to bolt an IEC motor
* 10,000 hours lifespan for all gearbox sizes
* Input speed up to 1500Rpm
* Breather or vents available for high speed required
Gearboxes Advantages
* Gearbox with low backlash
* Quiet running, when 1500Rpm, at 1meter distance, noise level less than 80dB
* Normal temperature, when 1500Rpm, temperature less than 50 deg. C
* Lubricants prior to shipment
* All miter gearboxes are factory tested prior to shipment
* Detailed 2D autocad drawing final confirmed before placing an order to us
* Small order quantities is acceptable
* Fast delivery time of standard models gearboxes, OEM & ODM are acceptable
Jacton Electromechanical Co.,Ltd
3
http://www.screw-jack.com
4. Configurations
Bevel Gear
High purity rugged alloy steel 20CrMnTiH material
Carburizing process, case hardened and lapped in pairs for intersecting shafts
Low noise with grinded spiral teeth
High torque with milled teeth
High rigidity and wear risistance
Pinion Shaft and Output Shaft
Hardened and tempered alloy steel 40Cr material
Hanging heavy load capacity
With key and keyway
Customized stainless steel, chromium coated or other corrosion resistance painting
Customized spline shaft,shaft without key and keyway
Housing
High rigidity cast iron
Customized stainless steel, galvanic coating or other corrosion resistance painting
Bearing
Heavy duty tapered roller bearing
Customized reinforced bearings for higher radial and axial load
Oil Seal
Double lip oil seal
Prevent gear oil leak and dustproof
Jacton Electromechanical Co.,Ltd
4
http://www.screw-jack.com
8. Selection Guide
JTV – 90 –
1
2
1:1
3
– 1500R
4
– 1500R
5
–
B – B3
6
7
1. Gearbox Series
JT: “Jacton” brand
V: V series miter gearbox
2. Model
Model
65
90
120
Gearbox Sizes
65x65x65 mm
90x90x90 mm
120x120x120 mm
Model
160
200
260
Gearbox Sizes
160x160x160 mm
200x200x200 mm
260x260x260 mm
Before selecting gearbox frame no., please check corresponding model’s specifications
3. Gear Ratio
Model
90
120
160
200
260
1:1
1:1
1:1
1:1
1:1
1:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
2:1
2:1
2:1
2:1
2:1
2:1
3:1
3:1
3:1
3:1
3:1
4:1
4:1
4:1
4:1
4:1
5:1
Gear Ratio
65
5:1
5:1
5:1
5:1
4 & 5. Input & Output RPM
Ratios
1:1
1.5:1
2:1
3:1
4:1
5:1
input Rpm
output Rpm
output Rpm
output Rpm
output Rpm
output Rpm
output Rpm
1500
1500
1000
750
500
375
300
1000
1000
667
500
333
250
200
750
750
500
375
250
187.5
150
500
500
333
250
167
125
100
250
250
167
125
83
62.5
50
50
50
33
25
17
12.5
10
6. Shaft Arrangements And Direction Of Shaft Rotating
Note: input shaft and output shafts can be rotated in both forward and reverse directions.
A: 2
way
gearbox,
input
shaft
clockwise
rotation
direction,
right
side
output
shaft
anticlockwise rotation direction.
B: 2 way gearbox, input shaft clockwise rotation direction, right side output shaft clockwise rotation
direction.
C: 2 way gearbox, input shaft clockwise rotation direction, left side output shaft clockwise rotation
direction.
D: 2 way gearbox, input shaft clockwise rotation direction, left side output shaft anticlockwise rotation
direction.
E: 3 way gearbox, input shaft clockwise rotation direction, two output shaft clockwise rotation
direction.
Jacton Electromechanical Co.,Ltd
8
http://www.screw-jack.com
9. F: 3 way gearbox, input shaft clockwise rotation direction, two output shaft anticlockwise rotation
direction.
G: 3 way gearbox, input shaft clockwise rotation direction, left side output shaft anticlockwise rotation
direction, inline output shaft anticlockwise rotation direction.
H: 3 way gearbox, input shaft clockwise rotation direction, left side output shaft clockwise rotation
direction, inline output shaft anticlockwise rotation direction.
L: 3 way
gearbox, input
shaft
clockwise rotation
direction,
right
side
output
shaft
anticlockwise rotation direction, inline output shaft anticlockwise rotation direction.
M: 3 way gearbox, input shaft clockwise rotation direction, right side output shaft clockwise rotation
direction, inline output shaft anticlockwise rotation direction.
N: 4 way gearbox, input shaft clockwise rotation direction, inline output shaft anticlockwise, two
output shaft anticlockwise rotation direction.
P: 4 way gearbox, input shaft clockwise rotation direction, inline output shaft anticlockwise, two
output shaft clockwise rotation direction.
7. Mounting Position
B3, C3, V3: horizontal mounting position
B5, C5, V5: overhung mounting position
B5, C5, V5: side wall mounting position
Jacton Electromechanical Co.,Ltd
9
http://www.screw-jack.com
10. Selection Examples
Load characteristics of each gearbox 50Nm, moderate load, working 8 hours/day continuously:
i.e: driven machine factor f1=1.25, input speed=1000Rpm, ratio i=1:1
Calculated with the following formula, the torque required by each gearbox is
Each gearbox required torque=50 x 1.25=62.5Nm
No.1 Gearbox:
No.1 gearbox carries its own torque of 62.5Nm and at the same time transmit torques to No.2 and
No.3 gearboxes, so the total load is 62.5Nm+62.5Nm+62.5Nm=187.5Nm
Check above 6h page specifications, JTV160 gearbox is selected
No.2 Gearbox:
Besides its own torque, No.2 gearbox has to transmit torque to No.3 gearbox, so the total load is:
62.5Nm+62.5Nm=125Nm
Check above 6h page specifications, JTV160 gearbox is selected
No.3 Gearbox:
As only load C exists, torque large than 62.5Nm is acceptable.
Check above 5h page specifications, JTV120 gearbox is selected
Notes:
1. When i≠1, please make a choice of the input shaft. When pinion shaft acts as the input shaft, the
machine is a gear reducer. When output shaft acts as the input shaft, it is an gear inceaser. The
positions of the two shafts can not be changed once the mounting positions and dimensions are
fixed.
2. When several gearboxes are connected for output, load capacity of the line shafting should be
checked.
Jacton Electromechanical Co.,Ltd
10
http://www.screw-jack.com
17. Application Examples
JTV series miter gearbox is also widely application in grain bin anger, tiller, fans, hay baler, tub
grinder, grain dryer, power rake, rock picker, food handling, stereo garage, amusement, packer,
textile machine, food processing machine, diese engine drive water pump, rotary axis drive, vertical
turbine water pump, lifting gear, crane installation, rolling mill, cable installation, conveyor drive and
stranding machinery. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to
press, propel or raise, JTV series miter gearbox is welcomed and ideal power transmission solution
with all these industries.
Jacton Electromechanical Co.,Ltd
17
http://www.screw-jack.com
18. Operation Manual
Please read this entire document prior to operating the miter gearbox. Miter gearbox failure or injury
to operators may be caused by improper installation, operation or maintenance.
Installation
Miter gearboxs must be mounted on a rigid, structurally sound baseplate. Ensure that miter gearbox
mounting pads rest evenly on the baseplate. The use of shims may be required to avoid housing
distortion which could alter the gear mesh or cause premature bearing failure.
The miter gearbox may be driven by direct coupling, flexible coupling, or V-belt drive. Couplers
should require only a light force to install. The driveline must be accurately aligned within the
equipment manufacturer's requirements to limit operating loads and minimize thrust loads on the
miter gearbox shaft. V-belt drives must be mounted close to the housing to minimize excessive
overhung loading which could result in early bearing or shaft failures. Sheaves must fit correctly. At
installation, a tight forced fit could move the shaft from its normal position and cause internal damage.
A loose fit could induce excessive vibration during operation and cause shaft damage or breakage.
Warning
When mounting the miter gearbox, the buyer is responsible to properly determine the quality or grade
of fastener, thread engagement, load carrying capacity, and torque requirements.
Warning
The buyer is responsible to provide protective shields over all external rotating parts, couplers, or
shaft extensions mounted on or with the miter gearbox. Protective clothing must be worn when
installing or maintaining the miter gearbox and operating system.
Initial operation should be carried out under no-load conditions. Before applying power to the miter
gearbox installation, review the following:
1. Check tightness of mounting bolts.
2. Check for proper oil level in miter gearbox.
3. Be certain that tools, debris, etc., are clear from rotating parts.
4. Rotate shafts by hand. If they do not rotate freely, check for uneven mounting, coupling
misalignment or excessive belt tension.
If all tests are satisfactory, make connections to shafts, ensure that all safety devices are in place,
and begin operation.
Lubrication
All miter gearboxes are factory tested prior to shipment. They include the correct amount of oil unless
specified by the customer to be shipped dry. Shaft bearings are splash lubricated and partially
submerged in oil when the miter gearbox is mounted horizontally. After installation, remove the
dipstick and verify correct oil level. If no dipstick is provided, determine level by any appropriate
method. In general, the oil level should be approximately half the depth of the miter gearbox (to the
parting line) for horizontal mounting, or to the shaft centerlines, if mounted other than horizontally.
Caution
Prior to operation, make sure the miter gearbox contains the correct amount of oil. If under-filled or
over-filled, damage to the miter gearbox or injury to personnel may result.
Jacton Electromechanical Co.,Ltd
18
http://www.screw-jack.com
19. Approved Lubricants:
For miter gearboxs operating in an ambient temp of –20 Deg. C and +85 Deg. C
JTV series miter gearbox lubricant uses liquid gear oil. When low speed less than 100Rpm, optional
grease lubricant
Caution
Donot combine synthetic with non-synthetic oils in the miter gearbox.
Maintenance
Warning
Disconnect power prior to any maintenance and do not bypass or inactivate any safety or protective
device. Lock out and tag the power supply to prevent unexpected application of power.
Routinely inspect mounting bolts, couplers,or other power transmitting devices to ensure all parts are
firmly anchored.Keep shafts and vent plugs (when included) clean to prevent foreign particles from
entering seals or housing. Inspect daily for any oil leaks and any unusual noises. Inspect weekly for
end play in shafts. Inspect belt drive tension after the first ten hours of operation and periodically
thereafter.
Check the oil level every 24 hours of operation. In the beginning to change the oil when the miter
gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will vary
for each particular installation depending on the severity of the environment. Normal changes should
occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service will be
realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high input
speeds, contact Jacton engineers.
Warning
Donot change or add oil while the miter gearbox is running. Damage to the miter gearbox or injury to
personnel may result. The miter gearbox housing, oil, plugs, and associated components may reach
high temperatures and cause severe burns. Use extreme care when servicing the miter gearbox.
Trouble Shooting
Jacton Electromechanical Co.,Ltd
19
http://www.screw-jack.com
20. Frequently Asked Questions
How Do I Know Which Shaft Of Miter gearbox Is As Input Shaft?
When using a 1:1 ratio gearbox ,it does not matter which shaft is used as the input shaft. Normally,
X-shaft is input shaft, Y-shaft is output shaft. For other reduction gear ratios input shaft is same as 1:1
ratio gearbox, but for increasing gear ratios input shaft, which is Y-shaft is input shaft, X-shaft is
output shaft.
Can I Use Miter gearbox As Speed Increaser?
All miter gearbox can be used as speed increaser, by inputting on the output side of the gearbox,
however it is important to check whether the miter gearbox can handle the power and speed. When
using as an increaser, the input speed does not exceed the specifications recommended maximum
speed. Special gearbox is available where the pinion can be put on the through shaft so that two
output shaft increase the speed.
Are Miter gearboxes Supplied Filled With Gear Oil?
Yes, all miter gearboxes are filled gear oil prior to shipment, customers can install them and use them
directly. Note: for low speed applications (100 rpm input speed and below) miter gearboxes may be
recommended to have grease lubrication.
How Often Should I Change Gear Oil In The Miter gearbox?
Check the gear oil level every 24 hours of operation. In the beginning to change the gear oil when the
miter gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will
vary for each particular installation depending on the severity of the environment. Normal changes
should occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service
will be realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high
input speeds, contact Jacton engineers.
How Transmission Efficiency Of Miter gearbox?
The miter gearbox transmission efficiency up to 98%
Jacton Electromechanical Co.,Ltd
20
http://www.screw-jack.com
21. Company History
In 1997, Established Jacton Hardware Fabrication Plant, mainly processing kinds of hardware
following customers requirements. Occupied 500 square meters.
In 2000, Established domestic sales department, started to develop local market, mainly processing
gear transmission parts such as worm and worm gear, acme threads screw, square threads screw
and acme lead screw nut. Meanwhile, sales also sell straight bevel gear and spiral bevel gears for
customers.
In 2002, According to some regular customers of steel plants and machines manufacturers, which
used Taiwan screw jacks and miter gearboxes, due to long delivery and high price, would affect the
normal operations. Jacton Hardware Fabrication Plant started to processing JT acme screw jack and
JT miter gearbox following above customers samples.
In 2003, Established engineering department, research and development others models of JT acme
screw jack and JT miter gearbox, and draw some factory production drawings and local sales'
customers drawing with 2d autocad software.
In 2005, According to local market demands, Jacton Hardware Fabrication Plant is committed to
research and development JB/T8809-1998 standard JTW worm screw jack, JTM machine screw
jack, JTB ball screw jack and JTP cubic body miter gearbox.
In 2006, Because of local markets fiercely competitive. Established Hongkong office-Jacton
International Limited with own US dollars and EURO account. Established international sales
department, focused on overseas markets. Meanwhile, "JACTON" as company only brand.
In 2008, According to intl sales market report, cubic body screw jacks and another type cubic body
miter gearboxes are very popular in Europe and America markets. After managements meetings, we
started to develop JTC cubic screw jack, JTS high speed bevel gear jack, JTV cubic body miter
gearbox and JTA corrosion resistance aluminium body miter gearbox.
In 2009, Jacton Hardware Fabrication Plant extension, occupied 5000 square meters. Company
improves the processes and products through technology investment, brings in advanced
technology, production and testing equipment.
In 2010, Jacton Hardware Fabrication Plant Passed ISO9001:2008 quality management system, we
are strictly implement the work flow of ISO9001:2008 certifications, which ensures oversea and local
customers are satisfaction with our screw jacks and miter gearboxes and fast delivery time.
In 2012, In order to facilitating management, according to management decisions, sales department
and design department moved to Taibao business building. Meanwhile, Jacton Hardware Fabrication
Plant changed to be Dongguan Jacton Electromechanical Co.,Ltd.
Jacton Electromechanical Co.,Ltd
21
http://www.screw-jack.com
22. Contact Us
Jacton Electromechanical Co.,Ltd
Jacton Electromechanical Co.,Ltd
(Head Quarters)
(Sales Dept. & Design Dept.)
1&2 Floors, Building F, Baisheng Industrial
1118, Taibao Business Building, No.1
Areas,
Langwei Rd, Xinan, Changan, Dongguan,
No.34,
Yongjun
Road,
Datang,
Dalingshan, Dongguan, Guangdong, China
Guangdong, China
Phone: 86 769 81585810
Phone: 86 769 81585852
Mobile: 86 189 25569548
Fax:
Jacton International Limited
Contact Us
(Hong Kong Branch)
General Enquiries: sales@screw-jack.com
86 769 81620195
jactonjack@gmail.com
Office 17,9/F.,Tower A,New Mandarin
Online Skype:
jactonjack (Warren)
Tsimshatsui,Kowloon,Hongkong
Online Skype:
jactongearbox (Abby)
Tel: 852-2793-5511
Website:
http://www.screw-jack.com
Fax:852-3590-2333
Urgently required, please directly make a call
Plaza,No.14,Science
Museum
Road,
to Warren +86 13532830851
Jacton Electromechanical Co.,Ltd
22
http://www.screw-jack.com