The document provides instructions for using a C38rs sewer nozzle with a 3-side jet carriage to cut tree roots inside sewer pipes. It describes marking reference points on the hose to position the nozzle 100mm in front of blockages. The user is instructed to slowly twist and turn the hose between the reference points to cut roots with the 3 side jets of the nozzle. Proper installation of the rotor swivel component is also outlined.
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
The DC38 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43t to be used in lines from 90 mm to 225 mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC38 can cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
The DC38 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43t to be used in lines from 90 mm to 225 mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC38 can cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Its specialty is to penetrate, unblock and cut through extreme tree roots, hard grease around bends or dropping into a shaft, with its front turbo nozzle
Can be used in 100 - 450 mm (4-18") lines.
Travels through 100 mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesDirectHitNozzles
The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC43 cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsDirectHitNozzles
Ideal weight to work in mains with front rings to cut, clean and flush down stream.
“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450 mm (6-18") lines.
Travels through 100 mm (4") bends and drops into a 150 mm (6")shaft when travelling downstream
Minimum hose size to be used with is 3/8".
Add a different size ring to increase its power.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Its specialty is to penetrate, unblock and cut through extreme tree roots, hard grease around bends or dropping into a shaft, with its front turbo nozzle
Can be used in 100 - 450 mm (4-18") lines.
Travels through 100 mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesDirectHitNozzles
The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC43 cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsDirectHitNozzles
Ideal weight to work in mains with front rings to cut, clean and flush down stream.
“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450 mm (6-18") lines.
Travels through 100 mm (4") bends and drops into a 150 mm (6")shaft when travelling downstream
Minimum hose size to be used with is 3/8".
Add a different size ring to increase its power.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).