Ideal weight to work in mains with front rings to cut, clean and flush down stream.
“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450 mm (6-18") lines.
Travels through 100 mm (4") bends and drops into a 150 mm (6")shaft when travelling downstream
Minimum hose size to be used with is 3/8".
Add a different size ring to increase its power.
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
The DC38 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43t to be used in lines from 90 mm to 225 mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC38 can cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Its specialty is to penetrate, unblock and cut through extreme tree roots, hard grease around bends or dropping into a shaft, with its front turbo nozzle
Can be used in 100 - 450 mm (4-18") lines.
Travels through 100 mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesDirectHitNozzles
The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC43 cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
The DC38 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43t to be used in lines from 90 mm to 225 mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC38 can cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Its specialty is to penetrate, unblock and cut through extreme tree roots, hard grease around bends or dropping into a shaft, with its front turbo nozzle
Can be used in 100 - 450 mm (4-18") lines.
Travels through 100 mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesDirectHitNozzles
The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC43 cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
CASE 721D Wheel Loader Service Repair Manualfudfjjsekekmem
This is the Highly Detailed factory service repair manual for theCASE 721D WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE 721D WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Fuel System
Electrical
Steering System
Power Train
Brakes
Hydraulic System
Mounted Equipment
Electrical Schematic
Hydraulic Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE 721D WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
CASE 721D Wheel Loader Service Repair Manualfudfjjsekekmem
This is the Highly Detailed factory service repair manual for theCASE 721D WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE 721D WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Fuel System
Electrical
Steering System
Power Train
Brakes
Hydraulic System
Mounted Equipment
Electrical Schematic
Hydraulic Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE 721D WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
Building a Raspberry Pi Robot with Dot NET 8, Blazor and SignalR - Slides Onl...Peter Gallagher
In this session delivered at Leeds IoT, I talk about how you can control a 3D printed Robot Arm with a Raspberry Pi, .NET 8, Blazor and SignalR.
I also show how you can use a Unity app on an Meta Quest 3 to control the arm VR too.
You can find the GitHub repo and workshop instructions here;
https://bit.ly/dotnetrobotgithub
Google Calendar is a versatile tool that allows users to manage their schedules and events effectively. With Google Calendar, you can create and organize calendars, set reminders for important events, and share your calendars with others. It also provides features like creating events, inviting attendees, and accessing your calendar from mobile devices. Additionally, Google Calendar allows you to embed calendars in websites or platforms like SlideShare, making it easier for others to view and interact with your schedules.
2. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
From your C38r Starter kit take your carriage
PCT/AU2012/000326
100 MM 150 MM 225 MM
Front view Back view Side view
30º
24º
3. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
Add your swivel
Side view
PCT/AU2012/000326
100 MM 150 MM 225 MM
30º
24º
4. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
From your C38 Starter Kit take the front nozzle
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
30º
5. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
30º
PCT/AU2012/000326
100 MM 150 MM 225 MM
24º
Screw them together with spanners provided in the Starter Kit
6. Connect your hose
hose
C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
7. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
Place assembly in the pipe
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
8. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
Turn the water on
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
9. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water off
10. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove assembly from the pipe
11. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
Add the ring
150 MM 225 MM
24º
30º
PCT/AU2012/000326
12. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
With circlip pliers add circlip one
150 MM 225 MM
24º
30º
PCT/AU2012/000326
13. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
Add the ring
150 MM 225 MM
24º
30º
PCT/AU2012/000326
14. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
With circlip pliers add circlip two
15. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Place assembly in the pipe
16. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water on
17. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Turn the water off and remove assembly from the pipe
18. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove the ring and circlips
19. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove the ring and circlips
20. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove the ring and circlips
21. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
150 MM 225 MM
24º
30º
PCT/AU2012/000326
Remove the ring and circlips
22. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
PCT/AU2012/000326
Insert C38r into a 50 mm pipe
23. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
Going through 50mm PVC pipe
24. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
30º
Going down into the blockage
PCT/AU2012/000326
25. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
26. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
Turn the water on
27. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
Send down and unblock the drain
28. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
Turn the water off
29. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
30º
Remove assembly from the pipe
30. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
24º
PCT/AU2012/000326
Un screw the front nozzle
30º
31. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
32. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Take the cap from your Cap kit if you need to go further
33. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
Screw them together with spanners provided in the starter kit
PCT/AU2012/000326
34. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Place assembly in the pipe
35. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Turn the water on
36. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Turn the water off
37. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Remove assembly from the pipe
38. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Un screw the Cap
39. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
40. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
Add your 24°extreem penetrator reverse turbo nozzle to the carriage
PCT/AU2012/000326
24º
41. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
Screw them together with spanners provided in the starter kit
24º
PCT/AU2012/000326
42. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
24º
PCT/AU2012/000326
Place the assembly in the pipe
43. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
2244ºº
PCT/AU2012/000326
Turn the water on
44. C43r Starter Kit Add on no:1 and make a Cap Kit Add on no: 2 is the 24º front nozzle Add on no: 2 are the rings
100 MM 150 MM 225 MM
30º
2244ºº
PCT/AU2012/000326
Turn the water of