119439634 cases

Homework Help
https://www.homeworkping.com/
Research Paper help
Online Tutoring
click here for freelancing tutoring sites
ultiple Choice Multiple Answer Question This question refers to case on 'Morbay
Engineering Works (MEW)' : Following sys tems are prerequisites for an incentive
scheme:Correct Answer Sound system of accounting operators daily output , Good
production planning and control system , Good Inspection and quality control
system Your Answer Efficient wage payment system , Good production planning and
control system , Go od Inspection and quality control system Select The Blank
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Jigs and
fixtures o nce provided will be able to maintain accuracy up to about ________
pieces. Correct Answer 20000 Your Answer 20000 Select The Blank Question This
question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Duration of pr
oject can be reduced if duration of an activity on ________ path is reduced.
Correct Answer Critical Your Answer Critical Multiple Choice Single Answer
Question This Question refers to the case of 'Kerson Automobiles' : Cars are
manually pus hed over the wooden stand placed in the major repairs section
because of :Correct Answer Absence of the underground pit Your Answer Absence of
the underground pit Multiple Choice Multiple Answer Question This Question
refers to the case of 'The Gujrat Engineering company Limited' : T he company
has received a special order where :Correct Answer A special cylinder is to be
manufactured. , The item is to be manufactured from a hollow bored forging ,
Fastest delivery is requested Your Answer A special cylinder is to be
manufactured. , The item is to be manufactured from a hollow bored forging ,
Fastest delivery is requested Select The Blank Question This Question refers to
the case of 'Hansa Tractomotive Ltd.' : The loss of cons ignment was ________.
Correct Answer Total Your Answer Total True/False Question

This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr.
Sen noticed that each worker was provided with the drawing of the component.
Correct Answer False Your Answer False Multiple Choice Multiple Answer Question
This Question refers to the case of 'Eagle Machine Company' : Cost of running Sa
lly's department is Rs 3,70,000 per year. This is on account of :Correct Answer
Salaries , Fringes , Expenses Your Answer Salaries , Fringes , Expenses Multiple
Choice Multiple Answer Question This question refers to case on 'Morbay
Engineering Works (MEW)' : An incentive plan can be considered as a tool for
following:Correct Answer Increase productivity , Create more capacity , Reduce
manufacturing costs Your Answer Increase productivity , Create more capacity ,
Reduce manufacturing costs Multiple Choice Multiple Answer Question This
Question refers to the case of 'Kerson Automobiles' : The huge work table p
laced outside the machine shop can be used to carry out :Correct Answer Filing
work , Debarring work , Cleaning work Your Answer Filing work , Debarring work ,
Cleaning work Multiple Choice Single Answer Question This Question refers to the
case of 'Autogears Private Limited' : The management is interested in the
following :Correct Answer Improved method of working Your Answer Improved method
of working Multiple Choice Single Answer Question This Question refers to the
case of ase Engineer informed Mr. Kaul that d from :Correct Answer A source who
is not in the approved Your Answer A source who is not in the approved
'Universal Fasteners Ltd.' : Mr. Bose, Purch previous lot of 500 kg material was
purchase list list
True/False Question This question refers to case on Morbay Engineering Works
(MEW).Overtime tend to reward more than incentive scheme. Correct Answer True
Your Answer

True Multiple Choice Single Answer Question This Question refers to the case of
'Divgi Metalwares Private Limited' : The com pany is manned by :Correct Answer
Professional managers Your Answer Professional managers Select The Blank
Question This Question refers to the case of 'Eagle Machine Company' : The
purchase depar tment is responsible only for buying and ________. Correct Answer
Expediting Your Answer Expediting Select The Blank Question This question refers
to case on 'Weldtech India Pvt Ltd (WIPL)' : Delays in comp letion of ________
would increase Project cost. Correct Answer Project Your Answer Project Select
The Blank Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' :
Fixed ________ are to be computed only when machines need to be purchased.
Correct Answer Overhead Your Answer Overhead Select The Blank Question The
question refer to the case on 'Kalpak Engineers' : Raw material in the form of
bar stock is supplied by the ________. Correct Answer Customer Your Answer
Customer True/False Question This question refers to case on 'Uma Tools Pvt Ltd
(UTPL)' : Cost of reject abov e 5% machining rejection is borne by the vendor.
Correct Answer True Your Answer True Select The Blank Question This question
refers to 'Automotive Gears Private Limited' : The case study requ ires
calculation of set up ________ for the job.

Correct Answer Cost Your Answer Cost Multiple Choice Single Answer Question This
Question refers to the case of 'Kerson Automobiles' : It was decided to mod ify
the existing layout of the plant in the year :Correct Answer 1972 Your Answer
1972 Multiple Choice Single Answer Question This Question refers to the case of
'The Geer Company' : The company had a small foundry until 1946. This was
subsequently closed and the purchase of ferrous ca stings were handled by
:Correct Answer A man who had been a supervisor in the foundry Your Answer A man
who had been a supervisor in the foundry Multiple Choice Single Answer Question
This Question refers to the case of 'Classic Engineering Components Ltd.' : This
company was acquired by Das Group of Industries. Mr. Mohit Sen,(head of Busines
s planning function in the corporate office) was visiting the factory as its
:Correct Answer Turn over was stagnating Your Answer Turn over was stagnating
Select The Blank Question This question refers to case on 'Morbay Engineering
Works (MEW)' : Overtime must be ________ to guarantee the success of the wage
incentive scheme. Correct Answer Eliminative Your Answer Eliminative Multiple
Choice Single Answer Question This Question refers to the case 'Quality Gauges
Pvt. Ltd.' : The scheme shall a pply to :Correct Answer Each and every employee
Your Answer Each and every employee Multiple Choice Multiple Answer Question
This Question refers to the case of 'K.T Gears' : The groove cutting operation i
s performed by :Correct Answer Holding the gear blank on a mandrel in face plate
, Cutting the groove by two to ols , One tool is held in rear side and other
held in front side Your Answer

Holding the gear blank on a mandrel in face plate , Cutting the groove by two to
ols , One tool is held in rear side and other held in front side Multiple Choice
Multiple Answer Question This question refers to case on 'Uma Tools Pvt Ltd
(UTPL)' : If the Exhaust Mani fold is to be manufactured in house, following are
the requirements:Correct Answer New jigs and fixtures , Additional shift ,
Additional manpower Your Answer New jigs and fixtures , Additional shift
Multiple Choice Single Answer Question This Question refers to the case of
'Classic Engineering Components Ltd.' : The responsibility of physical movement
of material was assigned to :Correct Answer Helpers Your Answer Helpers Select
The Blank Question This Question refers to the case of 'Autogears Private
Limited' : The task given is to redraw ________ activity chart for the improved
method. Correct Answer Multiple Your Answer Multiple Multiple Choice Single
Answer Question This Question refers to the case 'Suyog Udyog' : Balancing
weights are manufactu red using facilities arranged in :Correct Answer Process
type of layout Your Answer Process type of layout True/False Question This
question refers to case on 'Morbay Engineering Works (MEW)' : "It is diffic ult
to install an incentive scheme and easy to withdraw when desired." Correct
Answer False Your Answer False Multiple Choice Multiple Answer Question This
Question refers to the case of 'Universal Fasteners Ltd.' : Mr Sharma, Prod
uction Engineer informed Mr. Kaul that :Correct Answer Material testing was done
by a worker as Raw Material Inspector was absent , Vis ual checking for cracks
on sample basis was carried out , Heat treatment operato r is a new one . Your
Answer Material testing was done by a worker as Raw Material Inspector was
absent , Vis ual checking for cracks on sample basis was carried out , Heat
treatment operato r is a new one .

Multiple Choice Multiple Answer Question This Question refers to the case of
'Divgi Metalwares Private Limited' : The new items contracted by the company are
handled by the development department for : Correct Answer Submission of samples
, Manufacture of one or two production lots , Transfer to manufacturing
department for regular production, after successful development Your Answer
Submission of samples , Manufacture of one or two production lots , Transfer to
manufacturing department for regular production, after successful development
'Hansa Tractomotive Ltd.': The contract with Kay Jee Hydraulics Ltd was agreed
with following terms & conditions :Correct Answer Price per unit FOR Bombay ,
Delivery 10-12 weeks after receipt of buyer's confir med order , Payment 60 days
after dispatch of material Your Answer Price per unit FOR Bombay , Delivery 10-
12 weeks after receipt of buyer's confir med order , Payment 60 days after
dispatch of material Match The Following Question Correct Answer Your Answer
Activity in CPM Arrow Arrow This question refers to case on 'Weldtech India Pvt
Ltd (WIPL)' : Critical Path Project duration Project duration CPM/PERT Project
planning/ scheduling technique Project planning/ scheduling technique Cost
overrun Delays in project Delays in project Multiple Choice Single Answer
Question This question refer to the case on "Allied Industries Pvt Ltd" :
Following cost element is considered while calculating total cost of buying
:Correct Answer Transport cost Your Answer Transport cost Multiple Choice
Multiple Answer Question This Question refers to the case of 'Divgi Metalwares
Private Limited' : As per the Activity description given in the table,
Preparation of operational layout a ctivity affects following activities
:Correct Answer Design and draft hobbing fixture , Procure plug gauge , Procure
ring gauge Your Answer Design and draft hobbing fixture , Procure plug gauge ,
Procure ring gauge

True/False Question This Question refers to the case of 'Universal Fasteners
Ltd.' : The organizatio n has reputation for poor deliveries. Correct Answer
False Your Answer True True/False Question This question refers to the case of
'Northern Machinery Ltd' : The company's sup pliers are of all sizes and
scattered across the country. Correct Answer True Your Answer True Multiple
Choice Single Answer Question This Question refers to the case 'Indus Foundries
Ltd.':Parveen Kumar proposed t o set up a :Correct Answer Cast Iron foundry Your
Answer Cast Iron foundry Multiple Choice Multiple Answer Question This question
refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Following is t he
information requirement for using CPM/PERT techniques:Correct Answer List of
activities , Activity duration , Precedent relationship of the activitie s Your
Answer List of activities , Activity duration , Precedent relationship of the
activitie s True/False Question This Question refers to the case of Narmada
Electricals Ltd. Mr. Jain proposed t hat for accounting of material, and to
carry out other task, two additional cler ks shall be recruited Correct Answer
True Your Answer True Select The Blank Question This Question refers to the case
of 'Kerson Automobiles' : The pedestal grinder mounted on the huge work table,
gives out ________ and blows out dust. Correct Answer Sparks Your Answer Sparks
True/False Question This Question refers to the case of 'Universal Fasteners
Ltd.' : Mr. Sharma, Pro

duction Engineer informed Mr. Kaul that Hardening & Tempering was the last opera
tion. Correct Answer True Your Answer True Match The Following Question Correct
Answer Your Answer Anonymous letter received by M.D. Need to justify Need to
justify This question refers to the case of 'Northern Machinery Ltd.' : Senior
buyers Seen in top hotels with suppliers Seen in top hotels with suppliers
Reason for failure to convince the Board of Directors No material facts to
support the arguments No material facts to support the arguments Lot of items on
the agenda Need to be concise and to the point Need to be concise and to the
point True/False Question This Question refers to the case of 'Artwood Products'
: It is necessary to keep stock of standard furniture to cater to sudden
requirement of the customers. Correct Answer True Your Answer True True/False
Question This Question refers to the case of 'The Irate Vendor' : The President
knows tha t some changes in purchasing policy are being planned. Correct Answer
True Your Answer True at 12:53 AM 0 comments Links to this post Labels: Cases in
Operations Management Cases in Operations Management - 4 LIST OF ATTEMPTED
QUESTIONS AND ANSWERS
'The Gujrat Engineering company Limited' : T he company has received a special
order where :Correct Answer Fastest delivery is requested , A special cylinder
is to be manufactured. , The item is to be manufactured from a hollow bored
forging Your Answer

A special cylinder is to be manufactured. , The item is to be manufactured from
a hollow bored forging , Fastest delivery is requested Multiple Choice Multiple
Answer Question This Question refers to the case of 'Classic Engineering
Components Ltd.' : The company has well established machine shop having more
than 150 machines and :Correct Answer A heat treatment shop , Metrology
section , Packing section Your Answer A heat treatment shop , Metrology
section , Packing section True/False Question This Question refers to the case
of 'Divgi Metalwares Private Limited' : The ord er has been finalized from a
leading engineering firm. Correct Answer False Your Answer False Multiple Choice
Single Answer Question The question refer to the case on 'Kalpak Engineers' : In
the case for all machi ning operations following data on time is
furnished:Correct Answer Setup time and standard time separately Your Answer
Setup time and standard time separately Select The Blank Question The question
refer to the case on 'Kalpak Engineers' : The sawed off pieces from power
hacksaw are then moved to ________ facing and centering machine. Correct Answer
Special- purpose Your Answer Special- purpose Select The Blank Question This
question refer to the case on "Allied Industries Pvt Ltd" : Allied Industri es
Pvt ltd is a small ________ concern with 25 workmen. Correct Answer Proprietary
Your Answer Proprietary True/False Question This Question refers to the case
'Quality Gauges Pvt. Ltd.' : As per union, fixa tion of time standards for the
gauges will lead to large scale rejection. Correct Answer True Your Answer True
Match The Following Question Correct Answer

Your Answer Anonymous letter received by M.D. Need to justify Need to justify
This question refers to the case of 'Northern Machinery Ltd.' : Senior buyers
Seen in top hotels with suppliers Seen in top hotels with suppliers Reason for
failure to convince the Board of Directors No material facts to support the
arguments No material facts to support the arguments Lot of items on the agenda
Need to be concise and to the point Need to be concise and to the point Multiple
Choice Multiple Answer Question This Question refers to the case 'Suyog Udyog' :
The process involves the use of :Correct Answer HMT M-2V machine , HMT-2U
machine , Investa Pillar drill Your Answer HMT M-2V machine , HMT-2U machine ,
Investa Pillar drill Multiple Choice Single Answer Question The question refer
to the case on 'Kalpak Engineers' : Process sheet does not pr ovide following
data:Correct Answer Shift Your Answer Shift Multiple Choice Multiple Answer
Question This question refers to case on 'Morbay Engineering Works (MEW)' :
Following are the characteristics of scalon plan:Correct Answer All employees
receive a guaranteed time wage , Incentive bonus is based on reduc tion in
labour to sales ratio , A standard for the ratio of labour cost to the t otal
sales value is set as an index Your Answer All employees receive a guaranteed
time wage , Incentive bonus is based on reduc tion in labour to sales ratio , A
standard for the ratio of labour cost to the t otal sales value is set as an
index Multiple Choice Single Answer Question This Question refers to the case of
'National Engineering Co.' : Mr. Kher, Mater ial Manager, had talked to supplier
who agreed to take back the 2200 kgs of 22 A /F En 1 in stock at :Correct Answer
The rate he sold to them Your Answer The rate he sold to them Match The
Following Question Correct Answer Your Answer Equipment cost

Capital recovery factor Capital recovery factor This question refer to the case
on "Allied Industries Pvt Ltd." : Variable cost Power cost Power cost Fixed cost
Space cost Space cost Item Sealing pump Sealing pump True/False Question This
question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : The management knew
the activities involved, their durations and interrelationship, still are not in
position to tell when the project will be completed. Correct Answer True Your
Answer True Multiple Choice Single Answer Question This Question refers to the
case of 'The Geer Company' : The purchase of steel w as done exclusively by
:Correct Answer One buyer Your Answer One buyer Multiple Choice Multiple Answer
Question The question refer to the case on 'Kalpak Engineers' : For
manufacturing Stay Bo lt following machines are planned:Correct Answer Copying
Lathe , Radial Drilling Machine , Thread Rolling machine Your Answer Copying
Lathe , Radial Drilling Machine , Thread Rolling machine Multiple Choice
Multiple Answer Question The question refer to the case on 'Kalpak Engineers' :
Following are the operati ons involved in manufacturing stay bolt in the
case:Correct Answer Copy turning , Thread Rolling , Drilling Your Answer Copy
turning , Thread Rolling , Drilling True/False Question This Question refers to
the case of 'Universal Fasteners Ltd.' : Mr. Sharma, Pro duction Engineer
informed Mr. Kaul that Hardening & Tempering was the last opera tion. Correct
Answer True Your Answer True Multiple Choice Single Answer

Question This Question refers to the case 'Quality Gauges Pvt. Ltd.' : Incentive
scheme w as finalized based on :Correct Answer Monthly sales Your Answer Monthly
sales Multiple Choice Multiple Answer Question This Question refers to the case
of 'Divgi Metalwares Private Limited' : The new items contracted by the company
are handled by the development department for : Correct Answer Submission of
samples , Manufacture of one or two production lots , Transfer to manufacturing
department for regular production, after successful development Your Answer
Submission of samples , Manufacture of one or two production lots , Transfer to
manufacturing department for regular production, after successful development
Multiple Choice Single Answer Question This Question refers to the case 'Indus
Foundries Ltd.':Parveen Kumar proposed t o set up a :Correct Answer Cast Iron
foundry Your Answer Cast Iron foundry Multiple Choice Single Answer Question
This Question refers to the case of 'K.T Gears' :To study the company's blanking
operations to improve methods and fix labour performance standards, the company
has constituted :Correct Answer An industrial engineering department Your Answer
An industrial engineering department True/False Question This question refers to
case on Morbay Engineering Works (MEW).Overtime tend to reward more than
incentive scheme. Correct Answer True Your Answer True Multiple Choice Multiple
Answer Question This Question refers to the case of 'K.T Gears' : The firm is
:Correct Answer A proprietary firm , Engaged in manufacture of spur gears ,
Engaged in manufactu re of helical gear Your Answer A proprietary firm , Engaged
in manufacture of spur gears , Engaged in manufactu re of helical gear
True/False Question

This Question refers to the case of 'Kerson Automobiles' : Some areas can not be
used because of odour emanating from adjoining two painting bays. Correct Answer
True Your Answer False Select The Blank Question This Question refers to the
case of 'The Irate Vendor' : As per Jones, the new _ _______ procedures were
sound. Correct Answer Purchasing Your Answer Purchasing Multiple Choice Multiple
Answer Question This Question refers to the case of 'National Engineering Co.' :
The GM instruct ed the Finance Manager that in the next meeting :Correct Answer
Cutting tools should be analyzed , Stationery should be analyzed , Every one sho
uld sit and devise the action plan to fix items in these groups & give a time bo
und specific program within next two days Your Answer Cutting tools should be
analyzed , Stationery should be analyzed , Every one sho uld sit and devise the
action plan to fix items in these groups & give a time bo und specific program
within next two days Multiple Choice Single Answer Question This Question refers
to the case of 'Artwood Products' : The company is engaged in design and
manufacture of wooden furniture. The critical factor in acceptance of furniture
is :Correct Answer Quality Your Answer Quality Select The Blank Question This
Question refers to the case of 'Classic Engineering Components Ltd.' : It w as
observed that there was no ________ or any marking system to know identificat
ion of the components, their status in terms of acceptance/rejection and quantit
y of the components in the bins. Correct Answer Tag Your Answer Tag Select The
Blank Question This Question refers to the case of 'The Gujrat Engineering
company Limited' : A compromise was finally reached in which the supplier agreed
to ________ the can cellation charges. Correct Answer Withdraw Your Answer
Withdraw

'Divgi Metalwares Private Limited' : The tab le given in the case study gives
details of activities and expected time for the same. It requires construction
of :Correct Answer Network diagram of the activities Your Answer Network diagram
of the activities Select The Blank Question This Question refers to the case
'Suyog Udyog' : The process sheet involves sele ction of ________ time. Correct
Answer Cycle Your Answer Cycle Multiple Choice Single Answer Question The
question refer to the case on 'Kalpak Engineers' :Kalpak Engineers have cont
racted from a boiler company manufacturing of 500 nos of stay bolt. In the manuf
acturing process grinding operation is carried out on following machine :Correct
Answer Cylindrical grinder Your Answer Cylindrical grinder Select The Blank
Question This Question refers to the case of 'The Geer Company' : The volume of
growth tr ipled due to ________ management. Correct Answer Aggressive Your
Answer Aggressive True/False Question This question refers to case on 'Uma Tools
Pvt Ltd (UTPL)' : Cost of reject abov e 5% machining rejection is borne by the
vendor. Correct Answer True Your Answer False True/False Question This Question
refers to the case of 'Narmada Electricals Ltd.' :The rates of scr ap were
reviewed from time to time. Correct Answer False Your Answer False Select The
Blank Question This Question refers to the case of 'Narmada Electricals Ltd.' :
NEL has plans f or expanding its activities and shortage ________ was one of the
major constrain

ts for its plans. Correct Answer Space Your Answer Space Select The Blank
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : The item
exhaust ma nifold is presently not ________. Correct Answer Manufactured Your
Answer Manufactured Select The Blank Question This Question refers to the case
'Quality Gauges Pvt. Ltd.' : The agreement ment ioned that Incentive amount will
be paid along with ________. Correct Answer Wages Your Answer Wages Multiple
Choice Single Answer Question This Question refers to the case of 'Eagle Machine
Company' : The company is fac ing following problem :Correct Answer Sales are
declining Your Answer Sales are declining Multiple Choice Single Answer Question
This Question refers to the case of 'The Gujrat Engineering company Limited' : A
substantial portion of its sales are special order items on which manufacture i
s started :Correct Answer Only after the order has been received from the buyer
Your Answer Only after the order has been received from the buyer Multiple
Choice Single Answer Question This Question refers to the case of ase Engineer
informed Mr. Kaul that d from :Correct Answer A source who is not in the
approved Your Answer A source who is not in the approved
purchase list list
True/False Question This question refers to case on 'Morbay Engineering Works
(MEW)' : Under Scanlon Plan employee is paid incentive bonus based on individual
efforts and additiona l output. Correct Answer True

Your Answer False Multiple Choice Multiple Answer Question This Question refers
to the case of 'Narmada Electricals Ltd.' : Production or Q uality department
decide when these become surplus/obsolete :Correct Answer Part , Component ,
Item Your Answer Part , Component , Material Select The Blank Question This
Question refers to 'Uday Electroplating Shop' :The owner finds it ________ to
get part time employees when there is heavy work load. Correct Answer Difficult
Your Answer Difficult Multiple Choice Multiple Answer Question This question
refers to case on 'Weldtech India Pvt Ltd (WIPL)' : project planni ng/scheduling
techniques are called by following names:Correct Answer CPM , PERT , Network
Analysis Your Answer CPM , PERT , Network Analysis Multiple Choice Multiple
Answer Question This Question refers to the case of 'Hansa Tractomotive Ltd.' :
After completion of manufacturing, Jay Jee took following actions :Correct
Answer Dispatched the consignment by Express Roadlines by truck , Raised the
Hundi for the invoiced amount , Did not send the consignment by Hansa's
designated carrier Your Answer Dispatched the consignment by Express Roadlines
by truck , Raised the Hundi for he invoiced amount , Did not send the
consignment by Hansa's designated carrier at 12:52 AM 0 comments Links to this
post Labels: Cases in Operations Management Cases in Operations Management - 3
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
'Northern Machinery Limited' : The V.P. aske d Material Manager to prepare short
report to be presented to board of directors about :Correct Answer Buying
policies Your Answer

Buying policies Multiple Choice Multiple Answer Question This Question refers to
the case of 'Northern Machinery Limited' : As per Materi als Manager basis of
awarding contract is :Correct Answer Justified in each case , All Purchase
orders above Rs. 10,000/- are counter sign ed by him , All Purchase orders above
Rs. 50,000/- are signed by V.P. Your Answer Justified in each case , All
Purchase orders above Rs. 10,000/- are counter sign ed by him , All Purchase
orders above Rs. 50,000/- are signed by V.P. True/False Question This Question
refers to the case of 'K.T Gears' : The activities performed by th e operator
are listed on the practitioner's data sheet. Correct Answer True Your Answer
'Divgi Metalwares Private Limited' : The com pany is manned by :Correct Answer
Professional managers Your Answer Professional managers Multiple Choice Multiple
Answer Question This Question refers to the case of 'The Irate Vendor' : The old
supplier :Correct Answer Has been supplying for over 30 years , Does not
understand why he has been cut o ff , Does not understand why no chance has been
given to him to discuss his bid Your Answer Has been supplying for over 30 years
, Does not understand why he has been cut o ff , Does not understand why no
chance has been given to him to discuss his bid Multiple Choice Multiple Answer
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : While
making Make o r Buy decisions, Buy indicator includes following costs :Correct
Answer Raw material cost , Purchase cost , Fixed overhead cost Your Answer Raw
material cost , Purchase cost Multiple Choice Multiple Answer Question This
Question refers to the case of 'Divgi Metalwares Private Limited' : As per the
Activity description given in the table, Preparation of operational layout a
ctivity affects following activities :Correct Answer Design and draft hobbing
fixture , Procure plug gauge , Procure ring gauge Your Answer Design and draft
hobbing fixture , Procure plug gauge , Procure ring gauge

True/False Question This question refers to case on 'Morbay Engineering Works
(MEW)' : "It is diffic ult to install an incentive scheme and easy to withdraw
when desired." Correct Answer False Your Answer False Match The Following
Question Correct Answer Your Answer Activity in CPM Arrow Circle This question
refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Critical Path Project
duration Project duration CPM/PERT Project planning/ scheduling technique
Project planning/ scheduling technique Cost overrun Delays in project Delays in
project True/False Question This question refers to case on 'Morbay Engineering
Works (MEW)' : Work sampling and production studies can be used to test
viability of the performance standar ds. Correct Answer True Your Answer True
True/False Question This Question refers to the case of 'Eagle Machine
Company' : The company buys a variety of material, ranging from a few ponds of
rare metals to sizable quantit ies of sheet metal. Correct Answer True Your
Answer True Multiple Choice Single Answer Question This Question refers to the
case 'Quality Gauges Pvt. Ltd.' : The scheme shall a pply to :Correct Answer
Each and every employee Your Answer Each and every employee Multiple Choice
Multiple Answer Question This question refers to case on 'Morbay Engineering
Works (MEW)' : An incentive plan can be considered as a tool for
following:Correct Answer

Increase productivity , Create more capacity , Reduce manufacturing costs Your
Answer Increase productivity , Create more capacity , Reduce manufacturing costs
Select The Blank Question This Question refers to the case of 'Kerson
Automobiles' : Battery charger place d on one end of table creates ________.
Correct Answer Nuisance Your Answer Nuisance Multiple Choice Multiple Answer
Question This Question refers to the case of 'The Irate Vendor' : The
President's memoran dum says :Correct Answer We have treated this supplier
unfairly , He would like to see if his complaint i s justified , The Vendor's
letter suggests that we do not have a policy on evalu ating our vendors Your
Answer We have treated this supplier unfairly , He would like to see if his
complaint i s justified , The Vendor's letter suggests that we do not have a
policy on evalu ating our vendors Select The Blank Question This Question refers
to the case 'Suyog Udyog' : Number of work stations are to be decided based on
assumption that monthly off take is ________ numbers. Correct Answer 8000 Your
Answer 8000 Select The Blank Question This Question refers to the case of
'Universal Fasteners Ltd.' : Personnel Offic er Mr. Sinha informed Mr. Kaul that
Employee ________ is very high. Correct Answer Turnover Your Answer Turnover
Works (MEW)' : In Scanlon Pl an all employees receive guaranteed ________ wages.
Correct Answer Time Your Answer Time Select The Blank Question This question
refers to 'Automotive Gears Private Limited' : The case study requ ires
calculation of set up ________ for the job. Correct Answer Cost Your Answer

Cost Multiple Choice Multiple Answer Question This question refer to the case on
"Allied Industries Pvt Ltd" : Variable cost c onsists of the following :Correct
Answer Cost of a pair thread roll , Regrinding charges on thread roll , Power
cost Your Answer Cost of a pair thread roll , Regrinding charges on thread
roll , Power cost True/False Question This Question refers to the case 'Quality
Gauges Pvt. Ltd.' : The executives wer e entitled for incentive bonus. Correct
Answer True Your Answer True Select The Blank Question This Question refers to
the case 'Indus Foundries Ltd.' : Projected turnover in the first year itself is
over ________ crore rupees. Correct Answer 20 Your Answer 20 Select The Blank
Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : In
order to sa ve time in construction the management purchased a ________. Correct
Answer Factory-building Your Answer Factory-building Multiple Choice Single
Answer Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : One
of the followin g is not a variable overhead:Correct Answer Space Your Answer
Cutting oil True/False Question This question refers to case on 'Uma Tools Pvt
Ltd (UTPL)' : It is economical to continue subcontracting the machining of
Exhaust Manifold to vendors. Correct Answer False Your Answer False Select The
Blank Question This Question refers to the case of 'Classic Engineering
Components Ltd.' : Mr. Sen observed that the Machine Shop was looking ________.

Correct Answer Congested Your Answer Congested Multiple Choice Multiple Answer
Question This Question refers to the case of 'Artwood Products' : The cost of
manufacturi ng has increased due to :Correct Answer Blockage of funds in
inventory , Longer manufacturing cycle time , Poor quality of products Your
Answer Blockage of funds in inventory , Longer manufacturing cycle time , Poor
quality of products Multiple Choice Multiple Answer Question This Question
refers to the case of 'The Geer Company' : Problems got created du e to :Correct
Answer Added work load in purchasing , Divided buying responsibilities , Number
of inex perienced buyers Your Answer Added work load in purchasing , Divided
buying responsibilities , Number of inex perienced buyers Multiple Choice Single
Answer Question This Question refers to the case of 'Universal Fasteners Ltd.' :
During the meet ing with G.M (Mr. Kaul) Store Keeper Mr. Bapat informed that
purchases were made from :Correct Answer Several sources Your Answer Several
sources Multiple Choice Single Answer Question This Question refers to the case
'Quality Gauges Pvt. Ltd.' : With the introduct ion of the scheme :Correct
Answer The sales picked up Your Answer The sales picked up Multiple Choice
Single Answer Question This Question refers to the case of 'Northern Machinery
Limited' : The V.P. info rmed the Material Manager that the anonymous letter was
received by :Correct Answer M.D. Your Answer M.D., with copy to all the
directors Multiple Choice Single Answer Question This Question refers to the
case of Narmada Electricals Ltd.: In the existing me thod, the scarp generated
in processes like machining was stored in :Correct Answer

Scrap yard Your Answer Scrap yard Multiple Choice Single Answer Question This
question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : This case is on mak e-
buy decision for an item. Name of that item is one of the below :Correct Answer
Exhaust Manifold Your Answer Exhaust Manifold True/False Question This question
refers to the case of 'Northern Machinery Ltd' : The company's sup pliers are of
all sizes and scattered across the country. Correct Answer True Your Answer True
Select The Blank Question This Question refers to the case of 'Hansa
Tractomotive Ltd.' : Enroute to Delhi , the truck collided with an incoming
________. Correct Answer Tractor Trailer Your Answer Tractor Trailer Multiple
Choice Multiple Answer Question This Question refers to the case of 'Classic
Engineering Components Ltd.' : The company supplies components to :Correct
Answer Automobile industries , Printing machines , Machine tool & process
equipment ind ustries Your Answer Automobile industries , Printing machines ,
Machine tool & process equipment ind ustries Multiple Choice Multiple Answer
Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' :
Following are the activities involved in employee selection for WIPL :Correct
Answer Release of advertisement , Finalize job profile , Selecting candidates
Your Answer Release of advertisement , Selecting candidates Multiple Choice
Single Answer Question This question refers to case on 'Weldtech India Pvt Ltd
(WIPL)' : Use of Network Techniques beside computing project duration also helps
in the following :Correct Answer Possibilities of reducing project duration Your
Answer Possibilities of reducing project duration

'Kerson Automobiles' :The option of shifting the workshop to another location at
the outskirts of the city was shelved becau se :Correct Answer Company was
likely to lose business of spare parts and service of old cars Your Answer
Company was likely to lose business of spare parts and service of old cars
Works (MEW)' : Incentive sch eme should not be regarded as a substitute for
________ wage structure. Correct Answer Poor Your Answer Poor Multiple Choice
Single Answer Question The question refer to the case on 'Kalpak Engineers' :
This case is concerned wi th following element of production planning:Correct
Answer Routing Your Answer Routing Match The Following Question Correct Answer
Your Answer Machine shop congested with semi-processed material kept in the bins
and compone nts lying on the floors all around. Shortage of space Shortage of
space This Question refers to the case of 'Classic Engineering Components
Ltd.' : Meas uring instruments like vernier calipers, micrometers or gauges
Shared by operators Shared by operators Unispected lots Processed Processed
Responsibility of oiling /greasing Maintenance department Maintenance department
'Artwood Products' : As per study conducted by Mr. Tahil, it was observed that
Artwood's profitability has :Correct Answer Eroded Your Answer Eroded Select The
Blank Question This Question refers to the case of 'The Geer Company' : The
company decided to engage a consulting firm to aid in re-organizing the ________
operation.

Correct Answer Purchasing Your Answer Purchasing Multiple Choice Multiple Answer
Question This Question refers to the case of 'Kerson Automobiles' : As per
consultants, p roblems are due to following reasons :Correct Answer Material
flow (Cars) is not smooth , A major chunk of productive time is lost in
obtaining replacement of spares from stores. , Too often, helpers are found bus
y in transferring parts from work table to a hand trolley. Your Answer Material
flow (Cars) is not smooth , A major chunk of productive time is lost in
obtaining replacement of spares from stores. , Too often, helpers are found bus
y in transferring parts from work table to a hand trolley. True/False Question
This Question refers to the case of 'The Gujrat Engineering company Limited' : T
he company received an order and finally authorized completion of the forging an
d placed it in stock. Correct Answer False Your Answer True True/False Question
This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : As extra capacity c
an be generated by starting an additional shift, hence fixed overheads are sizab
le. Correct Answer False Your Answer False This question refers to case on 'Uma
Tools Pvt Ltd (UTPL)' : If the Exhaust Mani fold is to be manufactured in house,
following are the requirements:a) b) c) d) New jigs and fixtures Additional
shift Additional manpower Additional machinery 41. This question refers to case
on 'Weldtech India Pvt Ltd (WIPL)' : Project durati on can always be reduced by
deploying additional recourses. True False at 12:48 AM 0 comments Links to this
post Labels: Cases in Operations Management Cases in Operations Management - 2

LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Single Answer Question This question refer to the case on
"Allied Industries Pvt Ltd" : Following cost element is not considered while
calculating total cost of thread rolling in-hous e :Correct Answer Transport
cost Your Answer Transport cost True/False Question This Question refers to the
case of 'K.T Gears' : The activities performed by th e operator are listed on
the practitioner's data sheet. Correct Answer True Your Answer True Multiple
Choice Multiple Answer Question This Question refers to the case of 'Hansa
Tractomotive Ltd.' : After completion of manufacturing, Jay Jee took following
actions :Correct Answer Dispatched the consignment by Express Roadlines by truck
, Raised the Hundi for the invoiced amount , Did not send the consignment by
Hansa's designated carrier Your Answer Dispatched the consignment by Express
Roadlines by truck , Raised the Hundi for the invoiced amount , Did not send the
consignment by Hansa's designated carrier True/False Question This Question
refers to the case of 'Hansa Tractomotive Ltd.' : Kay Jee dispatch ed the
consignment as per the terms of the order. Correct Answer False Your Answer
False Multiple Choice Multiple Answer Question This Question refers to the case
'Suyog Udyog' : The process involves the use of :Correct Answer HMT M-2V machine
, HMT-2U machine , Investa Pillar drill Your Answer HMT M-2V machine , HMT-2U
machine , Investa Pillar drill True/False Question This question refers to case
on 'Uma Tools Pvt Ltd (UTPL)' : The cost of foundry reject is borne by the
company. Correct Answer True Your Answer

True Select The Blank Question This Question refers to the case of 'Classic
Engineering Components Ltd.' : Mr. Sen observed that the Machine Shop was
looking ________. Correct Answer Congested Your Answer Congested Multiple Choice
Single Answer Question This question refers to case on 'Uma Tools Pvt Ltd
(UTPL)' : Following is One ap parent saving if the machining is done at the
company's own plant:Correct Answer Sale of scrap Your Answer Sale of scrap
'The Irate Vendor' : The President's memoran dum says :Correct Answer We have
treated this supplier unfairly , He would like to see if his complaint i s
justified , The Vendor's letter suggests that we do not have a policy on evalu
ating our vendors Your Answer We have treated this supplier unfairly , He would
like to see if his complaint i s justified , The Vendor's letter suggests that
we do not have a policy on evalu ating our vendors Multiple Choice Single Answer
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Process
sheet for e xhaust manifold provides following information:Correct Answer Jigs
and fixtures required Your Answer Jigs and fixtures required Multiple Choice
Single Answer Question This question refers to case on 'Morbay Engineering Works
(MEW)' : The success o f an incentive plan to a large extent depends on the
following factor:Correct Answer Quality of performance standard Your Answer
Quality of performance standard Multiple Choice Multiple Answer Question This
Question refers to the case of 'The Irate Vendor' : The old supplier :Correct
Answer Has been supplying for over 30 years , Does not understand why he has
been cut o ff , Does not understand why no chance has been given to him to
discuss his bid Your Answer Has been supplying for over 30 years , Does not
given to him to discuss his bid

Multiple Choice Single Answer Question This question refers to case on 'Morbay
Engineering Works (MEW)' : One of the mo st popular and widely used incentive
plan is called by following name:Correct Answer Scanlon Plan Your Answer Scanlon
Plan Multiple Choice Single Answer Question This Question refers to the case of
'Classic Engineering Components Ltd.' : Mr. Sen noticed in the gangway a couple
of bins containing :Correct Answer Semi processed components Your Answer Semi
processed components Multiple Choice Single Answer Question This Question refers
to 'Uday Electroplating Shop' : It is a job order :Correct Answer Production
unit Your Answer Production unit Multiple Choice Multiple Answer Question This
Question refers to the case of 'The Geer Company' : Problems got created du e to
:Correct Answer Added work load in purchasing , Divided buying
responsibilities , Number of inex perienced buyers Your Answer Added work load
in purchasing , Divided buying responsibilities , Number of inex perienced
buyers Select The Blank Question This Question refers to the case of 'Narmada
Electricals Ltd.' : NEL has plans f or expanding its activities and shortage
________ was one of the major constrain ts for its plans. Correct Answer Space
Your Answer Space Multiple Choice Multiple Answer Question This question refers
to case on 'Morbay Engineering Works (MEW)' : Following are some of the
shortcomings of scanlon plan:Correct Answer It rewards workers even if increase
in sales is due to factor like price increas e , The plan does not recognize
individual efforts , The increase in labour cost due to wage agreement may
result in lesser incentive bonus to the workmen Your Answer It rewards workers
even if increase in sales is due to factor like price increas e , The increase
in labour cost due to wage agreement may result in lesser incen tive bonus to
the workmen

Multiple Choice Single Answer Question The question refer to the case on 'Kalpak
Engineers' : In the case for all machi ning operations following data on time is
furnished:Correct Answer Setup time and standard time separately Your Answer
Setup time and standard time separately True/False Question This Question refers
to the case of 'Divgi Metalwares Private Limited' : The ord er has been
finalized from a leading engineering firm. Correct Answer False Your Answer
False Multiple Choice Single Answer Question This Question refers to the case of
'The Gujrat Engineering company Limited' : I t is in the business of
manufacturing of :Correct Answer Hydraulic pumps & equipment Your Answer
Hydraulic pumps & equipment Select The Blank Question This question refers to
case on 'Morbay Engineering Works (MEW)' : Many incentiv es schemes fail in
their ________ due to 'loose standards'. Correct Answer Objectives Your Answer
Objectives Match The Following Question Correct Answer Your Answer Machine shop
congested with semi-processed material kept in the bins and compone nts lying on
the floors all around. Shortage of space Shortage of space This Question refers
to the case of 'Classic Engineering Components Ltd.' : Meas uring instruments
like vernier calipers, micrometers or gauges Shared by operators Shared by
operators Unispected lots Processed Processed Responsibility of oiling /greasing
Maintenance department Maintenance department Multiple Choice Multiple Answer
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : If the
Exhaust Mani fold is manufactured in house, following costs wll increase:-

Correct Answer Cost of power , Cost of labour , Cost of consumables like grease,
lubricant Your Answer Cost of power , Cost of labour , Cost of consumables like
grease, lubricant Select The Blank Question This Question refers to the case of
'The Irate Vendor' : As per Jones, the new _ _______ procedures were sound.
Correct Answer Purchasing Your Answer Purchasing Multiple Choice Multiple Answer
Question This Question refers to the case of National Engineering Co. Correct
Answer Despatched the consignment by Express Roadlines by truck , Raised the
Hundi for the invoiced amount , Did not send the consignment by Hansa's
designated carrier Your Answer Despatched the consignment by Express Roadlines
by truck , Raised the Hundi for the invoiced amount , Did not send the
consignment by Hansa's designated carrier Multiple Choice Multiple Answer
Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' :
project planni ng/scheduling techniques are called by following names:Correct
Answer CPM , PERT , Network Analysis Your Answer CPM , PERT , Network Analysis
True/False Question This Question refers to the case of 'Kerson Automobiles' :
The decision to utili ze gnagway space as "Service Bays" is good. Correct Answer
False Your Answer False Multiple Choice Multiple Answer Question This Question
refers to the case of 'Autogears Private Limited' : Work elements performed by a
gear shaving operator are :Correct Answer Load gear on mandrel and secure it
with a nut , Raise bed to enable gear teeth t o mesh with cutter teeth , Unlock
nut and remove gear from the mandrel Your Answer Load gear on mandrel and secure
it with a nut , Raise bed to enable gear teeth t o mesh with cutter teeth ,
Unlock nut and remove gear from the mandrel Select The Blank Question This
Question refers to the case of 'The Geer Company' : The volume of growth tr
ipled due to ________ management. Correct Answer Aggressive Your Answer

Aggressive Match The Following Question Correct Answer Your Answer Equipment
cost Capital recovery factor Capital recovery factor This question refer to the
case on "Allied Industries Pvt Ltd." : Variable cost Power cost Power cost Fixed
cost Space cost Space cost Item Sealing pump Threaded nut True/False Question
This Question refers to the case 'Suyog Udyog' : The operation time for C' sunk
14 dia holes on both sides is 0.50 per piece. Correct Answer True Your Answer
True True/False Question This Question refers to the case 'Quality Gauges Pvt.
Ltd.' : The executives wer e entitled for incentive bonus. Correct Answer True
Your Answer False Select The Blank Question This Question refers to the case of
'Universal Fasteners Ltd.' : Personnel Offic er Mr. Sinha informed Mr. Kaul that
Employee ________ is very high. Correct Answer Turnover Your Answer Turnover
'Northern Machinery Limited' : The V.P. aske d Material Manager to prepare short
report to be presented to board of directors about :Correct Answer Buying
policies Your Answer Buying policies True/False Question This Question refers to
the case 'Quality Gauges Pvt. Ltd.' : As per union, fixa tion of time standards
for the gauges will lead to large scale rejection.

Correct Answer True Your Answer True Select The Blank Question This Question
refers to the case of 'Artwood Products' : The ________ furniture is sold
through distributors. Correct Answer Standard Your Answer Standard Multiple
Choice Single Answer Question This question refers to case on 'Uma Tools Pvt Ltd
(UTPL)' : This case is on mak e-buy decision for an item. Name of that item is
one of the below :Correct Answer Exhaust Manifold Your Answer Exhaust Manifold
Works (MEW)' : Success of wa ge incentive plans to a large extent depends on the
________ of performance stan dards. Correct Answer Quality Your Answer Accuracy
True/False Question This Question refers to the case of 'Kerson Automobiles' :
MD has agreed to carr y out modification of existing plant. Correct Answer True
Your Answer True Select The Blank Question This Question refers to the case
'Suyog Udyog' : The process sheet involves sele ction of ________ time. Correct
Answer Cycle Your Answer Cycle Multiple Choice Single Answer Question This
Question refers to the case of 'Northern Machinery Limited' : Khan had used a
paper to deliver a talk to his senior buyers. This paper contained :Correct
Answer Summary of purchases Your Answer Summary of purchases

True/False Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' :
As extra capacity c an be generated by starting an additional shift, hence fixed
overheads are sizab le. Correct Answer False Your Answer False Select The Blank
Question This Question refers to the case of 'Northern Machinery Limited' : The
V.P. inst ructed Materials Manager to collect ________ information and evidence
to clarify that their system is foolproof. Correct Answer Relevant Your Answer
Relevant Select The Blank Question This question refers to case on 'Weldtech
India Pvt Ltd (WIPL)' : In order to sa ve time in construction the management
purchased a ________. Correct Answer Factory-building Your Answer Factory-
building Multiple Choice Multiple Answer Question The question refer to the case
on 'Kalpak Engineers' : Following are the operati ons involved in manufacturing
stay bolt in the case:Correct Answer Copy turning , Thread Rolling , Drilling
Your Answer Copy turning , Thread Rolling , Drilling Multiple Choice Multiple
Answer Question This Question refers to the case 'Indus Foundries Ltd.':The
location of plant ha s been narrowed down to following locations :Correct Answer
Kolhapur , Ahmedabad , Coimbatore Your Answer Kolhapur , Ahmedabad , Coimbatore
at 12:47 AM 0 comments Links to this post Labels: Cases in Operations Management
Cases in Operations Management - 1 LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Select The Blank Question This Question refers to the case 'Indus Foundries
Ltd.' :Industrial relations cl

imate at all the proposed locations is ________ for production. Correct Answer
Conductive Your Answer Conductive Multiple Choice Multiple Answer Question This
Question refers to the case of 'Classic Engineering Components Ltd.' : The
company supplies components to :Correct Answer Automobile industries , Printing
machines , Machine tool & process equipment ind ustries Your Answer Printing
machines , Machine tool & process equipment industries , Automobile ind ustries
True/False Question This question refers to the case of 'Northern Machinery Ltd'
: As per summary of purchases of the last year, Material cost as a proportion of
sales is 26%. Correct Answer False Your Answer False Select The Blank Question
The question refer to the case on 'Kalpak Engineers' : Raw material in the form
of bar stock is supplied by the ________. Correct Answer Customer Your Answer
Customer Multiple Choice Single Answer Question This question refers to case on
'Weldtech India Pvt Ltd (WIPL)' : Use of Network Techniques beside computing
project duration also helps in the following :Correct Answer Possibilities of
reducing project duration Your Answer Possibilities of reducing project duration
Select The Blank Question This Question refers to the case of 'Universal
Fasteners Ltd.' : Personnel Offic er Mr. Sinha informed Mr. Kaul that Employee
________ is very high. Correct Answer Turnover Your Answer Turnover True/False
Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : The
average efficie ncy on the other components currently being produced is around
75%. Correct Answer True Your Answer

True Multiple Choice Single Answer Question This question refers to case on 'Uma
Tools Pvt Ltd (UTPL)' : One of the followin g is not a variable overhead:Correct
Answer Space Your Answer Space Select The Blank Question This question refers to
case on 'Uma Tools Pvt Ltd (UTPL)' : Jigs and fixtures o nce provided will be
able to maintain accuracy up to about ________ pieces. Correct Answer 20000 Your
Answer 20000 Select The Blank Question This question refer to the case on
"Allied Industries Pvt Ltd" : Allied Industri es Pvt ltd is a small ________
concern with 25 workmen. Correct Answer Proprietary Your Answer Proprietary
True/False Question This question refers to case on 'Weldtech India Pvt Ltd
(WIPL)' : The management knew the activities involved, their durations and
interrelationship, still are not in position to tell when the project will be
completed. Correct Answer True Your Answer True True/False Question This
question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : It is economical to
continue subcontracting the machining of Exhaust Manifold to vendors. Correct
Answer False Your Answer False True/False Question This question refers to case
on 'Uma Tools Pvt Ltd (UTPL)' : As extra capacity c an be generated by starting
an additional shift, hence fixed overheads are sizab le. Correct Answer False
Your Answer False Multiple Choice Single Answer Question

This Question refers to the case 'Indus Foundries Ltd.': The company is faced wi
th following problems :Correct Answer Choice of Location Your Answer Choice of
Location Multiple Choice Multiple Answer Question This Question refers to the
case of 'Kerson Automobiles' : As per the MD, the co mpany is faced with
following problems :Correct Answer Union leaders do not work , Lower efficiency
of the mechanics, as they do not wo rk at their place of work , Union leaders
waste their time Your Answer Union leaders do not work , Lower efficiency of the
mechanics, as they do not wo rk at their place of work , Union leaders waste
their time True/False Question This question refers to case on 'Morbay
Engineering Works (MEW)' : "It is diffic ult to install an incentive scheme and
easy to withdraw when desired." Correct Answer False Your Answer False Select
The Blank Question This Question refers to the case 'Quality Gauges Pvt. Ltd.' :
The agreement ment ioned that Incentive amount will be paid along with ________.
Correct Answer Wages Your Answer Wages Match The Following Question Correct
Answer Your Answer Anonymous letter received by M.D. Need to justify Need to
justify This question refers to the case of 'Northern Machinery Ltd.' : Senior
buyers Seen in top hotels with suppliers Seen in top hotels with suppliers
Reason for failure to convince the Board of Directors No material facts to
support the arguments No material facts to support the arguments Lot of items on
the agenda Need to be concise and to the point Need to be concise and to the
point Select The Blank Question This Question refers to the case 'Suyog Udyog' :
Number of work stations are to be decided based on assumption that monthly off
take is ________ numbers. Correct Answer 8000 Your Answer

8000 Multiple Choice Multiple Answer Question The question refer to the case on
'Kalpak Engineers' : For manufacturing Stay Bo lt following machines are
planned:Correct Answer Copying Lathe , Radial Drilling Machine , Thread Rolling
machine Your Answer Copying Lathe , Radial Drilling Machine , Thread Rolling
machine Multiple Choice Single Answer Question This Question refers to the case
of 'Northern Machinery Limited' : Vice Presiden t ( Commercials) called the
Materials Manager Mr. Khan and informed him that an anonymous letter was
received which mentioned :Correct Answer Corruption in purchase department Your
Answer Corruption in purchase department Multiple Choice Multiple Answer
Question This Question refers to the case of 'Eagle Machine Company' :
Manufacturing Mana ger handles :Correct Answer Production , Inventory control ,
Receiving Your Answer Production , Inventory control , Receiving Select The
Blank Question The question refer to the case on 'Kalpak Engineers' : The sawed
off pieces from power hacksaw are then moved to ________ facing and centering
machine. Correct Answer Special- purpose Your Answer Special- purpose Multiple
Choice Single Answer Question This Question refers to the case of 'The Gujrat
Engineering company Limited' : A substantial portion of its sales are special
order items on which manufacture i s started :Correct Answer Only after the
order has been received from the buyer Your Answer Only after the order has been
received from the buyer Select The Blank Question This question refers to
'Automotive Gears Private Limited' : The company produce s items for ________
manufacturers. Correct Answer Automobile Your Answer Automobile Multiple Choice
Multiple Answer Question

The question refer to the case on 'Kalpak Engineers' : Following are the operati
ons involved in manufacturing stay bolt in the case:Correct Answer Copy
turning , Thread Rolling , Drilling Your Answer Copy turning , Thread Rolling ,
Drilling True/False Question This question refers to case on Morbay Engineering
Works (MEW).Overtime tend to reward more than incentive scheme. Correct Answer
True Your Answer True Multiple Choice Single Answer Question The question refer
to the case on 'Kalpak Engineers' :Kalpak Engineers have cont racted from a
boiler company manufacturing of 500 nos of stay bolt. In the manuf acturing
process grinding operation is carried out on following machine :Correct Answer
Cylindrical grinder Your Answer Cylindrical grinder Multiple Choice Multiple
Answer Question This Question refers to the case of 'Artwood Products' : The
cost of manufacturi ng has increased due to :Correct Answer Blockage of funds in
inventory , Longer manufacturing cycle time , Poor quality of products Your
Answer Blockage of funds in inventory , Longer manufacturing cycle time , Poor
quality of products Multiple Choice Multiple Answer Question This Question
refers to the case of 'Kerson Automobiles' : The huge work table p laced outside
the machine shop can be used to carry out :Correct Answer Filing work ,
Debarring work , Cleaning work Your Answer Filing work , Debarring work ,
Cleaning work Multiple Choice Single Answer Question The question refer to the
case on 'Kalpak Engineers' : This case is concerned wi th following element of
production planning:Correct Answer Routing Your Answer Routing Multiple Choice
Multiple Answer Question This question refer to the case on "Allied Industries
Pvt Ltd" : Variable cost c onsists of the following :Correct Answer

Cost of a pair thread roll , Regrinding charges on thread roll , Power cost Your
Answer Cost of a pair thread roll , Regrinding charges on thread roll , Power
cost True/False Question This Question refers to the case of Narmada Electricals
Ltd. Mr. Jain proposed t hat for accounting of material, and to carry out other
task, two additional cler ks shall be recruited Correct Answer True Your Answer
ase Engineer informed Mr. Kaul that d from :Correct Answer A source who is not
in the approved Your Answer A source who is not in the approved
purchase list list
Select The Blank Question This Question refers to the case of 'Hansa
Tractomotive Ltd.' : Enroute to Delhi , the truck collided with an incoming
________. Correct Answer Tractor Trailer Your Answer Tractor Trailer Match The
Following Question Correct Answer Your Answer Activity in CPM Arrow Arrow This
question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Critical Path
Project duration Project duration CPM/PERT Project planning/ scheduling
technique Project planning/ scheduling technique Cost overrun Delays in project
Delays in project Multiple Choice Multiple Answer Question This Question refers
to the case of 'The Irate Vendor' : The old supplier :Correct Answer Has been
supplying for over 30 years , Does not understand why he has been cut o ff ,
Does not understand why no chance has been given to him to discuss his bid Your
Answer Has been supplying for over 30 years , Does not understand why he has
been cut o ff , Does not understand why no chance has been given to him to
discuss his bid

National Engineering Co. Correct Answer Despatched the consignment by Express
Roadlines by truck , Raised the Hundi for the invoiced amount , Did not send the
consignment by Hansa's designated carrier Your Answer Despatched the consignment
by Express Roadlines by truck , Raised the Hundi for the invoiced amount , Did
not send the consignment by Hansa's designated carrier Select The Blank Question
This question refers to case on 'Morbay Engineering Works (MEW)' : Success of wa
ge incentive plans to a large extent depends on the ________ of performance stan
dards. Correct Answer Quality Your Answer Quality Select The Blank Question This
Question refers to the case of 'The Gujrat Engineering company Limited' : T he
________ supplier invoiced this company for a cancellation charge. Correct
Answer Original Your Answer Original Multiple Choice Single Answer Question The
question refer to the case on 'Kalpak Engineers' : Process sheet does not pr
ovide following data:Correct Answer Shift Your Answer Shift True/False Question
This question refers to the case of 'Northern Machinery Ltd' : The company's sup
pliers are of all sizes and scattered across the country. Correct Answer True
Your Answer True Multiple Choice Single Answer Question The question refer to
the case on 'Kalpak Engineers' : In the case for all machi ning operations
following data on time is furnished:Correct Answer Setup time and standard time
separately Your Answer Setup time and standard time separately Select The Blank
Question This Question refers to the case of 'Artwood Products' : Entire shop
floor was _ _______ due to piles of work in progress.

Correct Answer Congested Your Answer Congested Multiple Choice Single Answer
Question This Question refers to the case of 'Hansa Tractomotive Ltd.' : After
contractin g Hansa raised a :Correct Answer Purchase Order Your Answer Purchase
Order Multiple Choice Single Answer Question This question refer to the case on
"Allied Industries Pvt Ltd" : Following cost element is considered while
calculating total cost of buying :Correct Answer Transport cost Your Answer
Transport cost Multiple Choice Single Answer Question This Question refers to
the case of 'Kerson Automobiles' : Distance traveled eve ry day, by a mechanic
to get replacement from stores is :Correct Answer 4 to 6 miles Your Answer 4 to
6 miles Cases in Operations Management - 9 LIST OF ATTEMPTED QUESTIONS AND
ANSWERS Select The Blank Question This Question refers to the case of 'Narmada
Electricals Ltd.' : The disposal of material was done on ________ basis. Correct
Answer Weight Your Answer Weight Select The Blank Question This Question refers
to the case of 'National Engineering Co.' : GM commented th at every department
in this company competes with others in matter of ________. Correct Answer
Inefficiency Your Answer Inefficiency Select The Blank Question This question
refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Delays in exec ution of
project leads to cost ________. Correct Answer

Overrun Your Answer Overrun True/False Question This Question refers to the case
of 'Artwood Products' : It is necessary to keep stock of standard furniture to
cater to sudden requirement of the customers. Correct Answer True Your Answer
True Multiple Choice Single Answer Question This Question refers to 'Automotive
Gears Private Limited' : The company, for it s various items, has recently
introduced the concept of :Correct Answer Economic lot size Your Answer Economic
lot size Multiple Choice Multiple Answer Question This Question refers to the
case of 'Narmada Electricals Ltd.' : Other material considered to be
scrap/obsolete is :Correct Answer Packing material , Maintenance spares ,
Parts/components Your Answer Packing material , Maintenance spares ,
Parts/components , Electric motors True/False Question This Question refers to
the case of 'Kerson Automobiles' : MD has agreed to carr y out modification of
existing plant. Correct Answer True Your Answer True Multiple Choice Single
Answer Question This Question refers to the case of Narmada Electricals Ltd.:
G.M. recruited a s enior purchase manager, Mr. Sajid Durrani in the purchased
department :Correct Answer In view of need to procure parts/components for
development in time Your Answer In view of need to procure parts/components for
development in time Multiple Choice Single Answer Question This question refers
to case on 'Morbay Engineering Works (MEW)' : Following was the solution
conceived by the Production Manager to the need of increasing prod
uction:Correct Answer Introduction of incentive scheme Your Answer Introduction
of incentive scheme Select The Blank

Question This question refers to case on 'Morbay Engineering Works (MEW)' :
Overtime must be ________ to guarantee the success of the wage incentive scheme.
Correct Answer Eliminative Your Answer Eliminative Multiple Choice Multiple
Answer Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : If
the Exhaust Mani fold is manufactured in house, following costs wll
increase:Correct Answer Cost of power , Cost of labour , Cost of consumables
like grease, lubricant Your Answer Cost of power , Cost of labour , Cost of
consumables like grease, lubricant , Fi xed overheads Multiple Choice Single
Answer Question This Question refers to the case of 'The Geer Company' : The
purchase of steel w as done exclusively by :Correct Answer One buyer Your Answer
One buyer Multiple Choice Single Answer Question This Question refers to the
case of 'Kerson Automobiles' : Cars are manually pus hed over the wooden stand
placed in the major repairs section because of :Correct Answer Absence of the
underground pit Your Answer Absence of the underground pit True/False Question
This question refers to case on 'Morbay Engineering Works (MEW)' : Under Scanlon
Plan employee is paid incentive bonus based on individual efforts and additiona
l output. Correct Answer True Your Answer True True/False Question This Question
refers to the case of 'The Geer Company' : During the period of ra pid
expansion, it became necessary to subcontract a significant volume of machin ing
operations. Correct Answer True Your Answer True Multiple Choice Single Answer
Question This Question refers to the case of 'K.T Gears' : The groove cutting
operation i s performed at the :-

Correct Answer Capston lathe Your Answer Capston lathe Multiple Choice Single
Answer Question This question refer to the case on "Allied Industries Pvt Ltd" :
Following cost element is considered while calculating total cost of buying
:Correct Answer Transport cost Your Answer Transport cost Multiple Choice
Multiple Answer Question This Question refers to the case 'Indus Foundries Ltd.'
:Following items are rea dily available at all the three locations :Correct
Answer Raw materials , Scrap , Foundry chemicals Your Answer Raw materials ,
Scrap , Foundry chemicals , Manpower Match The Following Question Correct Answer
Your Answer Capacity cost Unabsorbed overheads Unabsorbed overheads This
question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Power cost Variable over
head Variable over head Setup cost Fixed labour cost Marginal cost Material cost
Direct cost Direct cost Multiple Choice Multiple Answer Question This Question
refers to the case of 'Northern Machinery Limited' : As per Materi als Manager
basis of awarding contract is :Correct Answer Justified in each case , All
Purchase orders above Rs. 10,000/- are counter sign ed by him , All Purchase
orders above Rs. 50,000/- are signed by V.P. Your Answer Justified in each
case , All Purchase orders above Rs. 10,000/- are counter sign ed by him , All
Purchase orders above Rs. 50,000/- are signed by V.P. , Case to case basis
'Divgi Metalwares Private Limited' : As per the Activity description given in
the table, Preparation of operational layout a ctivity affects following
activities :Correct Answer Design and draft hobbing fixture , Procure plug gauge
, Procure ring gauge Your Answer

Design and draft hobbing fixture , Procure plug gauge , Procure ring gauge , Man
ufacture hobbing fixture Multiple Choice Multiple Answer Question This Question
refers to the case of 'Kerson Automobiles' : As per the MD, the co mpany is
faced with following problems :Correct Answer Union leaders do not work , Lower
efficiency of the mechanics, as they do not wo rk at their place of work , Union
leaders waste their time Your Answer Union leaders do not work , Lower
efficiency of the mechanics, as they do not wo rk at their place of work , Union
leaders waste their time , Unsatisfactory layo ut Multiple Choice Single Answer
Question The question refer to the case on 'Kalpak Engineers' :Kalpak Engineers
have cont racted from a boiler company manufacturing of 500 nos of stay bolt. In
the manuf acturing process grinding operation is carried out on following
machine :Correct Answer Cylindrical grinder Your Answer Cylindrical grinder
Select The Blank Question This Question refers to the case of 'Artwood Products'
: Entire shop floor was _ _______ due to piles of work in progress. Correct
Answer Congested Your Answer Congested Multiple Choice Single Answer Question
This Question refers to the case of 'Hansa Tractomotive Ltd.' : The machines wer
e completed by Kay Jee :Correct Answer Within the stipulated delivery period
Your Answer Within the stipulated delivery period Select The Blank Question This
Question refers to the case of 'Kerson Automobiles' : The pedestal grinder
mounted on the huge work table, gives out ________ and blows out dust. Correct
Answer Sparks Your Answer Sparks Multiple Choice Single Answer Question This
question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Process sheet for e
xhaust manifold provides following information:Correct Answer Jigs and fixtures
required Your Answer Utilization of machine planned

Multiple Choice Single Answer Question This question refers to case on Uma Tools
Pvt Ltd (UTPL)' : Presently the raw ca stings are procured by UTPL and given to
machining to three vendors. If UTPL has to manufacture Exhaust Manifold in house
it would have to provide one of the fo llowing: Correct Answer New jigs and
fixtures Your Answer New jigs and fixtures Match The Following Question Correct
Answer Your Answer Mechanics going to clerk with requisition Get the
replacements authorization Get the replacements authorization This Question
refers to the case of 'Kerson Automobiles' : Loss of productive ti me Obtaining
replacement of spares from stores Obtaining replacement of spares from stores
Transfer of parts from work table to a hand trolley and pushing it out to the se
rvice bay Blowing off parts clean with compressed air Blowing off parts clean
with compressed air Space for storage of seats inside the workshop Avoid
wasteful movements Avoid wasteful movements Multiple Choice Multiple Answer
Question This Question refers to the case of 'The Irate Vendor' : The old
supplier :Correct Answer Has been supplying for over 30 years , Does not
given to him to discuss his bid Your Answer Has been supplying for over 30 years
, Does not understand why he has been cut o ff , Does not understand why no
chance has been given to him to discuss his bid , Is always asked his opinion
about quantity to be ordered True/False Question This Question refers to the
case of 'K.T Gears' : The activities performed by th e operator are listed on
the practitioner's data sheet. Correct Answer True Your Answer True True/False
Question This Question refers to the case of 'Classic Engineering Components
Ltd.' : Mr. Sen noticed that each worker was provided with the drawing of the
component. Correct Answer False Your Answer False

Select The Blank Question This Question refers to the case of 'Northern
Machinery Limited' : The V.P. inst ructed Materials Manager to collect ________
information and evidence to clarify that their system is foolproof. Correct
Answer Relevant Your Answer Relevant Multiple Choice Multiple Answer Question
This Question refers to the case of 'Autogears Private Limited' : Work elements
performed by a gear shaving operator are :Correct Answer Load gear on mandrel
and secure it with a nut , Raise bed to enable gear teeth t o mesh with cutter
teeth , Unlock nut and remove gear from the mandrel Your Answer Load gear on
mandrel and secure it with a nut , Raise bed to enable gear teeth t o mesh with
cutter teeth , Unlock nut and remove gear from the mandrel , Raise o il guard
and switch on the machine Multiple Choice Multiple Answer Question This Question
refers to the case of 'Artwood Products' : The cost of manufacturi ng has
increased due to :Correct Answer Blockage of funds in inventory , Longer
manufacturing cycle time , Poor quality of products Your Answer Blockage of
funds in inventory , Longer manufacturing cycle time , Poor quality of
products , Non availability of skilled labour Select The Blank Question This
Question refers to the case of 'K.T Gears' : The cycle time per piece to pe
rform the set of activities listed adds up to ________. Correct Answer 2.30
minutes Your Answer 2.30 minutes Select The Blank Question This Question refers
to the case of 'Universal Fasteners Ltd.' : Personnel Offic er Mr. Sinha
informed Mr. Kaul that Employee ________ is very high. Correct Answer Turnover
Your Answer Turnover Multiple Choice Single Answer Question This Question refers
to the case of 'National Engineering Co.' : As per GM, the route cause of this
non-sensical situation is lack of :Correct Answer Co-ordination Your Answer Co-
ordination

Multiple Choice Single Answer Question This Question refers to the case of 'The
Geer Company' : The company had a small foundry until 1946. This was
subsequently closed and the purchase of ferrous ca stings were handled by
:Correct Answer A man who had been a supervisor in the foundry Your Answer A man
who had been a supervisor in the foundry Multiple Choice Multiple Answer
Question This question refers to case on 'Morbay Engineering Works (MEW)' : An
incentive plan can be considered as a tool for following:Correct Answer Increase
productivity , Create more capacity , Reduce manufacturing costs Your Answer
Increase productivity , Create more capacity , Reduce manufacturing costs , Incr
ease sales True/False Question This question refers to 'Automotive Gears Private
Limited' : The table given in the case study gives approximate machine hour rate
for each indicated machine. Correct Answer True Your Answer True Select The
Blank Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : To
manufacture exha ust Manifild in-house additional capacity is required. Extra
capacity can be gen erated at UTPL by additional ________. Correct Answer Shift
Your Answer Shift True/False Question This Question refers to the case of
'Universal Fasteners Ltd.' : Mr. Sharma, Pro duction Engineer informed Mr. Kaul
that Hardening & Tempering was the last opera tion. Correct Answer True Your
Answer True Multiple Choice Multiple Answer Question This Question refers to the
case of 'K.T Gears' : The firm is :Correct Answer A proprietary firm , Engaged
in manufacture of spur gears , Engaged in manufactu re of helical gear Your
Answer A proprietary firm , Engaged in manufacture of spur gears , Engaged in
manufactu re of helical gear , Engaged in manufacture of cutting gears Multiple
Choice Multiple Answer

Question This question refer to the case on "Allied Industries Pvt Ltd" :
Following are c ost elements of make indicator :Correct Answer Transport cost ,
Tooling cost , Indirect Employee cost Your Answer Transport cost , Tooling
cost , Indirect Employee cost , Power cost True/False Question This Question
refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen was
informed by Mr. Ravikant, Materials Manager that counting is not necessa ry at
every stage as they count at the initial stage and since their workers and
supervisors are experienced, they can easily identify the components at each st
age of production. Correct Answer True Your Answer True True/False Question This
question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Project durati on
can always be reduced by deploying additional recourses. Correct Answer False
Your Answer False

119439634 cases

Recommended

Recommended

More Related Content

Similar to 119439634 cases

Similar to 119439634 cases (14)

Recently uploaded

Recently uploaded (20)

119439634 cases