Find a good 1-10v constant current led dimmable driver fast. Shanghai Euchips' 1-10v led dimmable driver supports 1-10V analog dimming signal, passive or active signal.

1. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42A-1HMC-1 User Manual V01.1 1 www.euchips.com
EUP42A-1HMC-1
1-10V Constant Current Dimming Driver
Product Features
Single channel output, output current level selectable by DIP S.W.
Support 1-10V analog dimming signal, passive or active signal
High input voltage of 200VAC ~ 240VAC
High efficiency up to 85%
Built-in active PFC function
100% output when no dimming signal input,
can be used as normal power supply
Dimming effect smooth, no flicker
Protections: Over load
Suitable for indoor LED lighting application,
such as down light, panel light, and so on
Technical Parameters
Model EUP42A-1HMC-1
Output
Current 900mA 1050mA 1200mA
Voltage 3-47VDC 3-40VDC 3-35VDC
Power 42.3W 42W 42W
Current Accuracy ±5%
Maximum Output Voltage 50VDC
R & N (Max) 200mVp-p
Channels 1
Input
Voltage 200– 240VAC
Frequency 50/60Hz
Power Factor（Typ） ≥0.9
Efficiency(Typ) 85%
Current 0.3Amax@230VAC
Inrush Current 30A@230VAC
Protection Over Load Close output，recovers automatically after fault removed
Function Dimming 1-10V dimming (Passive or active)
Others
Dimension 122*78*32 mm（L*W*H）
G.W 190g
Working temp. -20℃ ~ 40℃
Relative humidity 20~90% RH

2. SHANGHAI EUCHIPS INDUSTRIAL CO.,LTD
EUP42A-1HMC-1 User Manual V01.1 2 www.euchips.com
Dimension(mm)
Wiring Diagram
Current Selection Table
EUP42A-1HMC-1 is a multi-current dimming driver, output current level selectable by DIP S.W., as the following:
Current DIP-1 DIP-2
900mA OFF OFF
1050mA ON OFF
1200mA ON ON
Remark: Function default setting is: 900mA (@switch are all OFF state)