Unilumin introduces its new generation of ultra slim and light cast aluminum cabinets for LED displays. Weighing only 9-10 kgs each, the cabinets are 43% lighter than previous models. This reduces transportation costs significantly. The cabinets can be assembled and installed efficiently by only one person through mechanical designs like twist locks and adjustable anchors. Cabinets connect through signal and power cables in a daisy chain configuration for quick and easy setup.
Dongguan Rongxin Silicone Technology Co.,Ltd is a polymer material manufacturer located in Dongguan, China that was founded in 1999. They produce a variety of silicone rubber products including condensation molding silicone rubber, platinum molding silicone rubber, life casting silicone rubber, shoe soles silicone rubber, condensation electronic potting silicone rubber, and addition electronic potting silicone rubber. Their products are of high quality and certified to various international standards.
The document describes the OHAUS MB23 and MB25 basic moisture analyzers. The analyzers offer accurate moisture measurements at either 0.1% or 0.05% readability using infrared or halogen heating elements. They have a compact footprint and easy-to-clean design. Standard features include flexible performance for various applications, simple operation, and a compact size ideal for benchtop use.
ETA PCBA Coating Line Solution
More Information Plz Contact at smt6@smt11.com
Mobile : +8613828802354 (WhatsApp / Skype / Wechat)
Website: www.smt11.com
The Onset Q40i is an ultra-high resolution flatbed printer capable of delivering high production speeds up to 305 m2/hr. It has a higher 9 picolitre drop size compared to typical 27 picolitre printers, resulting in up to 1200 dpi resolution for crisp images and fine text. The 15-zone vacuum table and automated functions reduce setup times and increase productivity. Sophisticated detectors help protect the substrate and printheads for improved reliability.
This document provides physical, mechanical, electric, and thermal properties of a material. It lists values such as density, tensile strength, dielectric constant, heat distortion temperature, and melting point. The material has a density of 0.93 g/cm3, tensile stress at yield of 20 MPa, dielectric constant of 3.0 at 1 MHz, heat distortion temperature of 42°C, and melting point of 135°C. All values listed meet verification standards from organizations like ISO and IEC.
Grade1 is commercial pure titanium materials, often used in Heat exchangers.
contact sally by titaniummanufacturer@yahoo.com to get more information about titanium gr1 products, such as bars/rods, plates/strips/sheets, pipes/tubes. and so on.
Heterogeneity and Microstructural Features Intervening in the Ductile-Brittle...Pello Uranga
In conventional heat treatments or rolling schedules, the microstructure can be properly identified by its mean attributes. These parameters can properly predict the ductile-brittle (DB) transition temperatures measured by Charpy tests. However, if the austenite grain size distribution prior to transformation remains heterogeneous, after transformation, wider distributions of grain sizes will be obtained. In this context, the classical approaches do not properly predict the DB regime. This study analyzes the behavior of several ferrite-pearlite microstructures with different local heterogeneities. Grain size distributions, EBSD analysis identifying high angle misorientation boundaries and cleavage facet measurements were performed. These parameters have been incorporated in previous empirical expressions in order to quantify the contribution of these heterogeneities to the DB transition temperature.
Clirik clum mill-calcium carbonate powder making machine Ammy Cheng
clum series vertical mill is the professional used for calcium carbonate powder making machine .it is made by shanghai clirik machinery co,.ltd.the websites :
http://www.gypsumgrindingmill.in/
Dongguan Rongxin Silicone Technology Co.,Ltd is a polymer material manufacturer located in Dongguan, China that was founded in 1999. They produce a variety of silicone rubber products including condensation molding silicone rubber, platinum molding silicone rubber, life casting silicone rubber, shoe soles silicone rubber, condensation electronic potting silicone rubber, and addition electronic potting silicone rubber. Their products are of high quality and certified to various international standards.
The document describes the OHAUS MB23 and MB25 basic moisture analyzers. The analyzers offer accurate moisture measurements at either 0.1% or 0.05% readability using infrared or halogen heating elements. They have a compact footprint and easy-to-clean design. Standard features include flexible performance for various applications, simple operation, and a compact size ideal for benchtop use.
ETA PCBA Coating Line Solution
More Information Plz Contact at smt6@smt11.com
Mobile : +8613828802354 (WhatsApp / Skype / Wechat)
Website: www.smt11.com
The Onset Q40i is an ultra-high resolution flatbed printer capable of delivering high production speeds up to 305 m2/hr. It has a higher 9 picolitre drop size compared to typical 27 picolitre printers, resulting in up to 1200 dpi resolution for crisp images and fine text. The 15-zone vacuum table and automated functions reduce setup times and increase productivity. Sophisticated detectors help protect the substrate and printheads for improved reliability.
This document provides physical, mechanical, electric, and thermal properties of a material. It lists values such as density, tensile strength, dielectric constant, heat distortion temperature, and melting point. The material has a density of 0.93 g/cm3, tensile stress at yield of 20 MPa, dielectric constant of 3.0 at 1 MHz, heat distortion temperature of 42°C, and melting point of 135°C. All values listed meet verification standards from organizations like ISO and IEC.
Grade1 is commercial pure titanium materials, often used in Heat exchangers.
contact sally by titaniummanufacturer@yahoo.com to get more information about titanium gr1 products, such as bars/rods, plates/strips/sheets, pipes/tubes. and so on.
Heterogeneity and Microstructural Features Intervening in the Ductile-Brittle...Pello Uranga
In conventional heat treatments or rolling schedules, the microstructure can be properly identified by its mean attributes. These parameters can properly predict the ductile-brittle (DB) transition temperatures measured by Charpy tests. However, if the austenite grain size distribution prior to transformation remains heterogeneous, after transformation, wider distributions of grain sizes will be obtained. In this context, the classical approaches do not properly predict the DB regime. This study analyzes the behavior of several ferrite-pearlite microstructures with different local heterogeneities. Grain size distributions, EBSD analysis identifying high angle misorientation boundaries and cleavage facet measurements were performed. These parameters have been incorporated in previous empirical expressions in order to quantify the contribution of these heterogeneities to the DB transition temperature.
Clirik clum mill-calcium carbonate powder making machine Ammy Cheng
clum series vertical mill is the professional used for calcium carbonate powder making machine .it is made by shanghai clirik machinery co,.ltd.the websites :
http://www.gypsumgrindingmill.in/
Jual Sokkia SET62 Total Station, yang digunakan sebagai alat ukur sudut dan jarak yang dilengkapi dengan Electric Distance Meter (EDM) yang terintegrasi dalam satu unit alat. Perangkat ini juga telah dilengkapi dengan processor sehingga mampu menghitung jarak datar, koordinat, dan beda tinggi secara langsung tanpa perlu bantuan kalkulator lagi.
The document discusses various medical applications of tooling, including external turning, drilling, taper hole machining, and profile machining for hip and knee systems using materials like Co-Cr alloys and titanium alloys. It also covers bone plates, screws, spines, and instruments made from materials like titanium alloys and stainless steels. Key information on tool selection, machining parameters, and performance improvements over conventional tools are provided for each application.
Thermal energy based machining processes like electron beam machining (EBM), laser beam machining (LBM), and plasma arc machining (PAM) work by concentrating heat energy on a small area of the workpiece to melt and vaporize material. EBM uses a beam of high velocity electrons, LBM uses a focused laser beam, and PAM uses a high temperature plasma jet, all to remove tiny bits of workpiece material through localized heating and repetition of the process. While each has advantages like precision and lack of mechanical contact, they also have disadvantages like high equipment costs and low material removal rates.
BIG Industrial Roll-to Roll Uv Printer-TeckPro 3200Teckwin
The Teckwin TeckPro UV3200 printer offers high speed, productivity, and image quality for industrial printing applications. It can print on flexible film, fabric, and vinyl substrates up to 130 inches wide at speeds up to 990 square feet per hour. The printer features 800 dpi resolution, dual UV curing systems, precision registration, and optional white ink capability. It is designed for continuous high volume production and low cost of ownership.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of polyoxymethylene POM-C. Key information includes:
- Specific gravity of 1.39 g/cm3 and water absorption of 0.2%
- Maximum service temperatures of 110°C and -50°C
- Tensile strength at yield of 63 MPa and elongation at break of 31%
- Vicat softening point of 150°C and heat deflection temperature of 155°C/95°C
- Volume resistivity greater than or equal to 1013 Ω·cm and dielectric strength of 40 kV/mm
- Fair bondability, friction coefficient of 0.35,
Pom properties data sheet_tecaform_ah__black_ensingermandalika3
TECAFORM AH black is a polyacetal copolymer stock shape material that has high stiffness, strength, and toughness as well as good chemical resistance and machinability. It has a density of 1.41 g/cm3 and exhibits a tensile strength of 67 MPa, tensile modulus of 2800 MPa, and elongation at break of 32%. While it has good mechanical properties and resistance to chemicals, TECAFORM AH black has low electrical conductivity and is difficult to bond. It is suitable for applications in conveyor technology, mechanical engineering, automotive, precision engineering, and packaging machinery where good mechanical performance and chemical resistance are required.
Forecasting Of Advancements In Additive Manufacturing Gareth Gates
This document analyzes doubling the extrusion speeds of desktop 3D printers and the physical limitations. It measures the time to print a phone case at current speeds. Graphs show production costs decrease 16% each time speed doubles. The document forecasts plastic extrusion rates could reach over 1000 cm3/hr by 2050 through technological advances like multi-directional printing and holographic assembly, but further research is needed to optimize current printers for an 80 cm3/hr rate by 2023.
The document discusses heat dissipation technology and applications of multifunctional nano-dissipating materials. It introduces the materials' high thermal conductivity properties and how they can be used to coat metal substrates for efficient cooling. Case studies show the materials provide over 10% better heat dissipation compared to graphite sheets, at 30% lower cost. They have been successfully applied to improve cooling in mobile phones, tablets, TVs, and other consumer electronics.
This thesis examines using electrophoretic deposition (EPD) to coat 3D graphite felt with cobalt ferrite nanoparticles. The objectives are to improve the kinetically slow anodic reaction in the solar sulfur-ammonia thermochemical cycle for hydrogen production. Experiments include EPD with different suspensions, adhesion testing of deposits, penetration analysis via SEM, and electrochemical studies. Results show EPD fully penetrates the felt and maximum monolayer coverage is achieved. Deposits on 3 mm felt have the highest current density increase compared to the blank substrate.
This document provides specifications for various textile testing equipment, including:
- A tension meter that measures yarn tension with 0.1gm accuracy up to 300gm.
- A comb sorter with acrylic sheets and fiber mounting templates for sorting fibers.
- Microscopes, twist testers, wrap reels, and other equipment for examining yarns and fibers at various magnifications and measuring twist and other properties.
- Testing machines that measure properties like tensile strength, abrasion resistance, stiffness, and color fastness of textiles.
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
Shenzhen SBC Photoelectricity Co., Ltd. produces several series of LED display cabinets and screens for indoor and outdoor use. Their Rental No. 1 Series offers multiple pixel pitches and sizes for indoor and outdoor screens, with features like adjustable angles, easy maintenance access, and multiple installation methods. The document provides detailed technical specifications and parameters for the Rental No. 1 indoor and outdoor screen models.
Jinko Solar Tiger N-Type 60TR Module 355 - 375WBeyond Solar
Jinko Solar Module panels offer home and business owners reliable solar power paired with great aesthetics and options to match their personal preferences. Do the Jinko Solar Residential Modules pair their pleasing looks with the quality guarantee of Jinko Solar and our industry-leading Limited Manufacturer?s Warranty.
SKYCOM Communications Ltd is a Chinese manufacturer of optical fiber fusion splicers and related products located in Nanjing, Jiangsu province. They have been in business since 2010 and now employ experts and a marketing team with a modern production system. Their main products include fusion splicers, OTDR devices, optical fiber cleavers, cable welders, power meters, and they have certifications like CE and SGS. They aim to provide high quality products, timely support, and good after-sales service.
Non Standard Solar Photovoltaic ModulesSolar Innova
Solar Innova is a global renewable energy company focused on photovoltaic and thermal energy products. They develop advanced technology solar panels to provide customers with high-quality, sustainable energy solutions. The document provides specifications for Solar Innova's line of monocrystalline solar panels ranging from 5W to 40W, including electrical characteristics, mechanical properties, and component descriptions.
This document provides specifications for two indoor LED screen models from Luxon. The P3.75-SMD model has a pixel pitch of 3.75mm and resolution of 128x128 pixels per standard cabinet. It has a brightness of 1000CD/M2, 16384 color steps, and viewing angle of 140° vertically and 120° horizontally. The P3.84-SMD model has similar specifications but with a pixel pitch of 3.84mm and resolution of 150x150 pixels per standard cabinet. Both models are for indoor AV rental use and have a 50,000 hour lifetime to 50% brightness.
Manufacturers and suppliers of an assortment of Operation Theater Tables & Halogen Lights and LED Lights. These superior quality products widely used across various hospitals, clinics and allied establishments. Our products are Electric Surgical Operating Table, C-Arm Compatible Hydraulic Operating Table, Hydraulic Surgical Operating Table, Operating Theatre Table, Ceiling Suspended Operating Light, Instrument Trolley, Hospital Bed.
Features:
1.Ultra thin and light
2.Die casting aluminum cabinet with seamless assembling design
3.Extremely high refresh rate, grey scale and contrast ratio
4.Easy to transport and install, one person can assemble 60 cabinets per hour
5.Module front accessible, each cabinet can be taken out from the whole screen freely
6.Particular buckle design facilitates tool-free fast assembling
7.Consistent supply of product as well as spare parts
This document describes several LED OT light and OT table models from Technomed India. It provides specifications for each model such as intensity, color temperature, LED lifespan, brightness control options, and power supply. All models feature protective fire-resistant glass, ventilation for heat dissipation, and sterilizable components. The lights are available in various configurations of single or multiple color LEDs.
Jual Sokkia SET62 Total Station, yang digunakan sebagai alat ukur sudut dan jarak yang dilengkapi dengan Electric Distance Meter (EDM) yang terintegrasi dalam satu unit alat. Perangkat ini juga telah dilengkapi dengan processor sehingga mampu menghitung jarak datar, koordinat, dan beda tinggi secara langsung tanpa perlu bantuan kalkulator lagi.
The document discusses various medical applications of tooling, including external turning, drilling, taper hole machining, and profile machining for hip and knee systems using materials like Co-Cr alloys and titanium alloys. It also covers bone plates, screws, spines, and instruments made from materials like titanium alloys and stainless steels. Key information on tool selection, machining parameters, and performance improvements over conventional tools are provided for each application.
Thermal energy based machining processes like electron beam machining (EBM), laser beam machining (LBM), and plasma arc machining (PAM) work by concentrating heat energy on a small area of the workpiece to melt and vaporize material. EBM uses a beam of high velocity electrons, LBM uses a focused laser beam, and PAM uses a high temperature plasma jet, all to remove tiny bits of workpiece material through localized heating and repetition of the process. While each has advantages like precision and lack of mechanical contact, they also have disadvantages like high equipment costs and low material removal rates.
BIG Industrial Roll-to Roll Uv Printer-TeckPro 3200Teckwin
The Teckwin TeckPro UV3200 printer offers high speed, productivity, and image quality for industrial printing applications. It can print on flexible film, fabric, and vinyl substrates up to 130 inches wide at speeds up to 990 square feet per hour. The printer features 800 dpi resolution, dual UV curing systems, precision registration, and optional white ink capability. It is designed for continuous high volume production and low cost of ownership.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of polyoxymethylene POM-C. Key information includes:
- Specific gravity of 1.39 g/cm3 and water absorption of 0.2%
- Maximum service temperatures of 110°C and -50°C
- Tensile strength at yield of 63 MPa and elongation at break of 31%
- Vicat softening point of 150°C and heat deflection temperature of 155°C/95°C
- Volume resistivity greater than or equal to 1013 Ω·cm and dielectric strength of 40 kV/mm
- Fair bondability, friction coefficient of 0.35,
Pom properties data sheet_tecaform_ah__black_ensingermandalika3
TECAFORM AH black is a polyacetal copolymer stock shape material that has high stiffness, strength, and toughness as well as good chemical resistance and machinability. It has a density of 1.41 g/cm3 and exhibits a tensile strength of 67 MPa, tensile modulus of 2800 MPa, and elongation at break of 32%. While it has good mechanical properties and resistance to chemicals, TECAFORM AH black has low electrical conductivity and is difficult to bond. It is suitable for applications in conveyor technology, mechanical engineering, automotive, precision engineering, and packaging machinery where good mechanical performance and chemical resistance are required.
Forecasting Of Advancements In Additive Manufacturing Gareth Gates
This document analyzes doubling the extrusion speeds of desktop 3D printers and the physical limitations. It measures the time to print a phone case at current speeds. Graphs show production costs decrease 16% each time speed doubles. The document forecasts plastic extrusion rates could reach over 1000 cm3/hr by 2050 through technological advances like multi-directional printing and holographic assembly, but further research is needed to optimize current printers for an 80 cm3/hr rate by 2023.
The document discusses heat dissipation technology and applications of multifunctional nano-dissipating materials. It introduces the materials' high thermal conductivity properties and how they can be used to coat metal substrates for efficient cooling. Case studies show the materials provide over 10% better heat dissipation compared to graphite sheets, at 30% lower cost. They have been successfully applied to improve cooling in mobile phones, tablets, TVs, and other consumer electronics.
This thesis examines using electrophoretic deposition (EPD) to coat 3D graphite felt with cobalt ferrite nanoparticles. The objectives are to improve the kinetically slow anodic reaction in the solar sulfur-ammonia thermochemical cycle for hydrogen production. Experiments include EPD with different suspensions, adhesion testing of deposits, penetration analysis via SEM, and electrochemical studies. Results show EPD fully penetrates the felt and maximum monolayer coverage is achieved. Deposits on 3 mm felt have the highest current density increase compared to the blank substrate.
This document provides specifications for various textile testing equipment, including:
- A tension meter that measures yarn tension with 0.1gm accuracy up to 300gm.
- A comb sorter with acrylic sheets and fiber mounting templates for sorting fibers.
- Microscopes, twist testers, wrap reels, and other equipment for examining yarns and fibers at various magnifications and measuring twist and other properties.
- Testing machines that measure properties like tensile strength, abrasion resistance, stiffness, and color fastness of textiles.
How to manufacturing of LED Bulb/Tube Lights
Do you face the following questions:
1. Still don't know how to build one new LED Bulb/Tube Lights factory?
2. Recruitment difficulties season?
3. Low production efficiency?
4. The Labor cost is still rising?
Shenzhen SBC Photoelectricity Co., Ltd. produces several series of LED display cabinets and screens for indoor and outdoor use. Their Rental No. 1 Series offers multiple pixel pitches and sizes for indoor and outdoor screens, with features like adjustable angles, easy maintenance access, and multiple installation methods. The document provides detailed technical specifications and parameters for the Rental No. 1 indoor and outdoor screen models.
Jinko Solar Tiger N-Type 60TR Module 355 - 375WBeyond Solar
Jinko Solar Module panels offer home and business owners reliable solar power paired with great aesthetics and options to match their personal preferences. Do the Jinko Solar Residential Modules pair their pleasing looks with the quality guarantee of Jinko Solar and our industry-leading Limited Manufacturer?s Warranty.
SKYCOM Communications Ltd is a Chinese manufacturer of optical fiber fusion splicers and related products located in Nanjing, Jiangsu province. They have been in business since 2010 and now employ experts and a marketing team with a modern production system. Their main products include fusion splicers, OTDR devices, optical fiber cleavers, cable welders, power meters, and they have certifications like CE and SGS. They aim to provide high quality products, timely support, and good after-sales service.
Non Standard Solar Photovoltaic ModulesSolar Innova
Solar Innova is a global renewable energy company focused on photovoltaic and thermal energy products. They develop advanced technology solar panels to provide customers with high-quality, sustainable energy solutions. The document provides specifications for Solar Innova's line of monocrystalline solar panels ranging from 5W to 40W, including electrical characteristics, mechanical properties, and component descriptions.
This document provides specifications for two indoor LED screen models from Luxon. The P3.75-SMD model has a pixel pitch of 3.75mm and resolution of 128x128 pixels per standard cabinet. It has a brightness of 1000CD/M2, 16384 color steps, and viewing angle of 140° vertically and 120° horizontally. The P3.84-SMD model has similar specifications but with a pixel pitch of 3.84mm and resolution of 150x150 pixels per standard cabinet. Both models are for indoor AV rental use and have a 50,000 hour lifetime to 50% brightness.
Manufacturers and suppliers of an assortment of Operation Theater Tables & Halogen Lights and LED Lights. These superior quality products widely used across various hospitals, clinics and allied establishments. Our products are Electric Surgical Operating Table, C-Arm Compatible Hydraulic Operating Table, Hydraulic Surgical Operating Table, Operating Theatre Table, Ceiling Suspended Operating Light, Instrument Trolley, Hospital Bed.
Features:
1.Ultra thin and light
2.Die casting aluminum cabinet with seamless assembling design
3.Extremely high refresh rate, grey scale and contrast ratio
4.Easy to transport and install, one person can assemble 60 cabinets per hour
5.Module front accessible, each cabinet can be taken out from the whole screen freely
6.Particular buckle design facilitates tool-free fast assembling
7.Consistent supply of product as well as spare parts
This document describes several LED OT light and OT table models from Technomed India. It provides specifications for each model such as intensity, color temperature, LED lifespan, brightness control options, and power supply. All models feature protective fire-resistant glass, ventilation for heat dissipation, and sterilizable components. The lights are available in various configurations of single or multiple color LEDs.
This document provides specifications for several Human Machine Interface (HMI) products from Kunlin Technologies Ltd. including 10-inch, 7-inch, and 4.3-inch HMI models as well as an integrated PLC and HMI product. The HMI models include TFT touchscreen displays with LED backlights, memory storage, I/O capabilities, and operating parameters. The integrated PLC and HMI product allows for separate programming and includes customizable I/O, display, and processor options while meeting international standards.
This document provides specifications for Seraphim Solar's SRP-6PB series photovoltaic modules rated between 250-265W. Key details include:
- Modules meet various international safety and reliability certifications
- Modules are PID free and have passed voltage durability testing
- Electrical specifications are provided for each wattage module including power, voltage, current and efficiency ratings
- Modules have a 25 year linear power output warranty and are constructed with tempered glass, aluminum frames and junction boxes rated for outdoor use.
This document discusses the specifications and components of a transparent LED screen being installed at Universitas Jenderal Achmad Yani in Bandung, Indonesia. It includes details on the LED panels such as their weight, transparency, and ventilation. Diagrams show the screen structure and wiring. Components are listed like the LED cabinets, control system, software, and cables. Specifications cover the screen size, resolution, brightness, and other technical specifications.
1) Seraphim Solar produces the SRP-6MB series of solar photovoltaic modules in 265-280W sizes.
2) The modules pass various certifications for safety, reliability, and PID resistance. They also have a 25 year linear power output warranty.
3) Key product specifications are provided, including electrical characteristics at standard test conditions, temperature coefficients, mechanical dimensions, and packaging configuration. I-V and P-V curves are shown for the SRP-270-6MB model.
This document describes the Seraphim SRP-6PA 300-315W solar photovoltaic module. Key details include:
- It is a 72-cell polycrystalline panel with a power output ranging from 300-315W and maximum system voltage of 1000V.
- The panel has a temperature coefficient of -0.42%/°C, efficiency between 15.5-16.2%, and 25 year linear power output warranty.
- It measures 1956x992x50mm and weighs 24kg, with a frame of anodized aluminum alloy and 3.2mm tempered glass.
This document provides product information for the HiPanel T5 High Bay replacement LED fixture. It includes the company address and contact information, key product specifications like 100,000 hour LED life, up to 100 lm/W efficacy, and IP20 rating. It also provides dimensional drawings, part numbers, and illuminance charts for the various fixture sizes in the HiPanel product line.
Our transparent LED poster displays are even more impressive with improved transparency and brightness at no extra cost to our customers!
The transparency of our transparent digital posters is now 70% with 4500-5000 nits brightness.
Please visit our website for these amazing transparent LED displays and to see the whole range - http://crystal-display.com/products/tled-glass/
For more information on our Transparent LED products or our transparent display products please contact us via email or simply call our UK office on +44(0)1634 327420.
The Eloik Optical Fiber Fusion Splicer ALK-88 is a compact fiber splicer that uses proprietary fiber adjustment technology. It has a fast splicing speed of 7 seconds and supports different fiber types and diameters. The splicer is lightweight, durable, and offers interchangeable fiber holders for flexibility. It also provides features such as a 4.3 inch LCD screen, data storage, and low splice loss averages.
Dynamo LED Displays is an LED display manufacturing company based in the UK and Dubai that specializes in LED video displays, tickers, data acquisition, and interactive screens. It has a wide range of engineering skills and designs most systems in-house, including custom LED control systems. It manufactures innovative products with high quality and excellent customer service.
1. New generation of ultra slim and lightNew generation of ultra slim and light
casting aluminum cabinet from Unilu
minmin
Product introduction
Unilumin Group Co., Ltd
Add: #68, Lanjing North Road, Pingshan District,
shenzhen City, China
Zi d 518103Zipcode:518103
Website: www.unilumin.com
Fax: 0086-755-29912092
Tel: 0086-755-29918999
Hot line:400-677-3888
2. Solution for the frequent problems in LED screen rental business
problem solution
Transportation cost is higher Ultra slim and light cast aluminum cabinet
whose weight is less than 43kgs (including all
))
It’s inconvenient for carry, vulnerable to be damaged
Packaging is big . You have to find big space to store
the empty cases while the LED screen is being used
Each flight case can load 10cast aluminum
the empty cases while the LED screen is being used.
cabinets (2.304㎡)
Assembly efficiency is lower
Specific mechanical design on cabinet enable
the screen can be assembled by one personthe screen can be assembled by one person
The flatness of the screen is hard to be controlled .
1.Adjustable anchor on ground bean ensure
the flat foundation
2.There’s limited slot in cabinet, the flatness
of the screen can be controlled by cabinetof the screen can be controlled by cabinet
structure.
Installation efficiency is lower and various tools are
needed
1.The cabinets are jointed by lockers
2.Signal cable and power cable are combined
t
needed
to one
It’s inconvenient for urgent maintenance
1.Module and power supply/receiving card are
put in different 2 layers respectively
2.Indicator on cabinet backside can clearly
2
indicate connection status.
3. New generation Of ultra slim and light cast aluminum
bi t f U il icabinet from Unilumin
3
4. The features of Unilumin’s cast aluminum cabinet
The cabinet is made from cast aluminum the lockers andThe cabinet is made from cast aluminum, the lockers and
connectors are made from aluminum alloy,which ensure
the product is light and durable
1. Super-light—— the weight is only 9kgs(P6) , 9.8kgs(P4.28) ,10kgs(P3.75).
it’s very easy for installation.
2. Ultra-slim —— the thickness is less than 86mm, the thinnest size on edge is, g
14mm. 1CBM can load 32 cabinets, which save the transportation cost
significantlyg y
3. High Precision——processed by high precision CNC machine, the size is
accurate to 0 1 mmaccurate to 0.1 mm.
4. Convenient and Fast——one person can install at least 60 cabinets per hour
4
5. High Reliability ——high strength and hardness, good heat dissipation.
5. Super lightSuper light
• 9-10kgs /cabinet,43kgs/sqm,(include power su
l d i i d)-pply and receiving card)
• Cabinet size:480mm*480mm=0.23㎡
M d l i 240 *240• Module size:240mm*240mm
5
6. Ult liUltra slim
• The widest portion:
① P6→80mm;
② P3.75/P4.28→86mm
• The thinnest portion isp
14mm
80-86mm
14mm
6
9. 1-1:P3.75 Parameters(MBI5024)
parameters value parameters valueparameters value parameters value
LED encapsulation SMD2121(black lamp) Module power 40w
Pixel pitch 3.75mm brightness 1000 nits
h l d / M d l i h 49Physical density 71111pixels /㎡ Module weight 495g
Module resolution 64X64 Dots Cabinet weight 10kg
Cabinet resolution 128X128Dots Ingress protection IP30
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 4000:1
C bi t t i l
Epoxy Paint Coated
B i ht t l
0-100%(manual/automatic
Cabinet material
p y
Aluminum
Brightness control
%(
/time )
Driving method 1/8 Scan,Constant Current work temperature 0℃ - +45℃/10-90%RH
Storage
30℃ +50℃/10 90%RH Processing depth 14bits
g
Temperature
-30℃ - +50℃/10-90%RH Processing depth 14bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate ≥600Hz Gray scale 16384 levels per color
Power consumption
(max)
216w(950w/㎡)
Typical power
consumption
97w
Life time ≥100,000 Hours Rigging form king pin fast rig
9
Input voltage 110-220VAC±10%
Input power
frequency
50-60Hz
CAT5 Cable(L≤140m);
lti d fib ( L≤500 ) RF S VIDEO RGBHV YUV
10. 1-2: P4.28 Parameters(MBI5024)
parameters value parameters valuep p
LED encapsulation SMD2121(black lamp) Module power 35w
Pixel pitch 4.28mm brightness 1000 nits
Physical density 54590pixels /㎡ Module weight 480gPhysical density 54590pixels /㎡ Module weight 480g
Module resolution 56X56 Dots Cabinet weight 9.8kg
Cabinet resolution 112X112Dots
Ingress
protection
IP30
protection
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 4000:1
B i ht 0 100%( l/ t ti
Cabinet material Epoxy Paint Coated Aluminum
Brightness
control
0-100%(manual/automatic
/time )
Driving method 1/7 Scan,Constant Current
work
temperature
0℃ - +45℃/10-90%RH
p
Storage
Temperature
-30℃ - +50℃/10-90%RH Processing depth 14bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate ≥600Hz Gray scale 16384 levels per color
Power
consumption 145w(629w/㎡)
Typical power
consumption
65w
10
(max)
consumption
Life time ≥100,000 Hours Rigging form king pin fast rig
Input voltage 110-220VAC±10%
Input power
f
50-60Hz
11. 1-3:P6 Parameters(MBI5024)
parameters value parameters value
LED encapsulation SMD3528 Module power 30w
Pixel pitch 6mm brightness 1300 nits
Physical density 27777pixels /㎡ Module weight 240gy y p g g
Module resolution 40X40 Dots Cabinet weight 9kg
Cabinet resolution 80X80Dots
Ingress
protection
IP30
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 2000:1
Brightness 0-100%(manual/automatic
Cabinet material Epoxy Paint Coated Aluminum
Brightness
control
0 100%(manual/automatic
/time )
Driving method 1/8Scan,Constant Current
work
temperature
0℃ - +45℃/10-90%RH
Storage
Temperature
-30℃ - +50℃/10-90%RH Processing depth 14bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate ≥600Hz Gray scale 16384 levels per color
Power
consumption
(max)
110w(477w/㎡)
Typical power
consumption
50w
11
(max)
Life time ≥100,000 Hours Rigging form king pin fast rig
Input voltage 110-220VAC±10%
Input power
frequency
50-60Hz
13. 2-1:P3.75 Parameters(MBI5050)
parameters value parameters valueparameters value parameters value
LED encapsulation SMD2121(black lamp) Module power 40w
Pixel pitch 3.75mm brightness 1000 nits
h l d / M d l i h 49Physical density 71111pixels /㎡ Module weight 495g
Module resolution 64X64 Dots Cabinet weight 10kg
Cabinet resolution 128X128Dots Ingress protection IP30
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 4000:1
Cabinet material
Epoxy Paint Coated
Brightness control
0-100%(manual/automatic
Cabinet material
p y
Aluminum
Brightness control
/time )
Driving method 1/8 Scan,Constant Current work temperature 0℃ - +45℃/10-90%RH
Storage
30℃ +50℃/10 90%RH Processing depth 16bits
Temperature
-30℃ - +50℃/10-90%RH Processing depth 16bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate 2000Hz Gray scale 65536 levels per color
Power consumption
(max)
216w(950w/㎡)
Typical power
consumption
97w
Life time ≥100,000 Hours Rigging form king pin fast rig
13
Input voltage 110-220VAC±10% Input power frequency 50-60Hz
Signal connection
CAT5 Cable(L≤140m);
multi-mode fiber( L≤500m)
single mode fiber(
Input signal
RF, S-VIDEO, RGBHV,
YUV, YC & COMPOSITI
14. 2-2: P4.28 Parameters(MBI5050)
parameters value parameters valuep p
LED encapsulation SMD2121(black lamp) Module power 35w
Pixel pitch 4.28mm brightness 1000 nits
Physical density 54590pixels /㎡ Module weight 480gPhysical density 54590pixels /㎡ Module weight 480g
Module resolution 56X56 Dots Cabinet weight 9.8kg
Cabinet resolution 112X112Dots
Ingress
protection
IP30
protection
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 4000:1
B i ht 0 100%( l/ t ti
Cabinet material Epoxy Paint Coated Aluminum
Brightness
control
0-100%(manual/automatic
/time )
Driving method 1/7 Scan,Constant Current
work
temperature
0℃ - +45℃/10-90%RH
p
Storage
Temperature
-30℃ - +50℃/10-90%RH Processing depth 16bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate 2000Hz Gray scale 65536 levels per color
Power
consumption 145w(629w/㎡)
Typical power
consumption
65w
14
(max)
consumption
Life time ≥100,000 Hours Rigging form king pin fast rig
Input voltage 110-220VAC±10%
Input power
f
50-60Hz
15. 2-3:P6 Parameters(MBI5050)
parameters value parameters value
LED encapsulation SMD3528 Module power 30w
Pixel pitch 6mm brightness 1300 nits
Physical density 27777pixels /㎡ Module weight 240gy y p g g
Module resolution 40X40 Dots Cabinet weight 9kg
Cabinet resolution 80X80Dots
Ingress
protection
IP30
Cabinet size W480mm x H480mm viewing angle H: 120°; V:100°
Cabinet area 0.2304㎡ Contrast ratio 2000:1
Brightness 0-100%(manual/automatic
Cabinet material Epoxy Paint Coated Aluminum
Brightness
control
0 100%(manual/automatic
/time )
Driving method 1/8Scan,Constant Current
work
temperature
0℃ - +45℃/10-90%RH
Storage
Temperature
-30℃ - +50℃/10-90%RH Processing depth 16bits
Aspect ratio 1:1 Frame rate 50/60Hz
Refresh rate 2000Hz Gray scale 65536 levels per color
Power
consumption
(max)
110w(477w/㎡)
Typical power
consumption
50w
15
(max)
Life time ≥100,000 Hours Rigging form king pin fast rig
Input voltage 110-220VAC±10%
Input power
frequency
50-60Hz
16. system and installation introductionsystem and installation introduction
structure descriptionstructure description
1. cabinet
2. hanging beam, back supportg g , pp
3. the effect of installation
installation method
1. locker
2. screen installation (fixed and hangi)
system connection
1. system
2. cable
3. connection diagram
i
16
running assurance
26. Cabinets installation
Accurate locating from the pin/hole make the excellent
flatness of cabinets-jointflatness of cabinets joint
Locating pin Locating hole
Locating pin
26
27. Screen fixed installationScreen fixed installation
tsteps:
1、Put the
ConnectingConnecting
buckle into the
limiting
l ti l tlocation slot
27
30. Fixed installation effectFixed installation effect
Max 10 cabinets per line,
namely, the high isnamely, the high is
within 4.8m for fixed
installation
Adj t bl hAdjustable anchor
31. Hang installation effect
3 lines cabinets Hanging beam spec: 2 lines
2 lines cabinets
Hanging beam spec: 2 lines
and 3 lines, which can
compose various width
Max 20 cabinets per line,
namely the high is within
9.6m
31
34. CableCable
2-in-1 connector (9 pin signal and 3 pin power)2 in 1 connector (9 pin signal and 3 pin power)
Shield cable ( prevent interference between power and signal)
9 wires signal
34
3 wires power
35. CablingCabling
E h bi i h 2 bl i dEach cabinet with 2 connectors, cable in and out
in in
35out out
37. System connection
Lan cable
Power distribution
diagram
9+3 CABLE
R k
System
cabinet
Remark
One sending card
can load1280 x 1024
pixels
If we calculate 1
cabinet as 80 x
80pixels, then one
sending card can
loadload
192cabinets(16x12)
One lan cable can
load 96cabinet
37
load 96cabinet
39. Heat dissipation solutionHeat dissipation solution
Thi d t k d bi t t t 0 ℃
Back
Fro
This product can work under ambient temperature 0 ℃ ~
45 ℃,it can be used in exhibition and meeting place
where equipped with air conditioner
k
(
powers
ont
(
mo
There’re 2 layers inside the cabinet, module is installed
front and power supply/ receiving card are installed
behind 2 layers are separated for heat dissipation so as
supply/rec
dule
)
behind . 2 layers are separated for heat dissipation so as
to prevent from interfering each other.
C bi i d f l i ll h l d i i
ceivingcard
Cabinet is made of aluminum alloy , thermal conductivity
is good
d
)
Lower electrical current design, ensure lower
temperature generate in screen.
39
40. maintenance 1maintenance-1
Module front access is available, it can be assembled
and disassembled from front side
module front access
Mask without screw (P6)
P6 module
P3.75/P4.28
d l
module front access
magnet absorbing
d i (P3 75/P4 28)module design(P3.75/P4.28)
40
42. Maintenance -2Maintenance -2
• StepsSteps
①unplug the power cables;① p g p ;
②open the spanners;
③gently push the corners of cabinet and the
person in front side get ready to take itperson in front side get ready to take it.
42
43. maintenance 3maintenance-3
• Power supply and receiving card can be disassembled from back ,pp y g ,
there’s no need to disassemble module from front. It’s very easy
for maintenance
Take out the screws in here
and remove the cover forand remove the cover for
maintenance of power supply
and receiving card
43
45. Packaging
1. 1 flight case can load 10pcs cabinets;
2. flight case spec:
1)P3 75 1190*572*770( ) i ht 140k1)P3.75-1190*572*770(mm) weight:140kg
2)P4.28-1190*572*770(mm) weight:138kg
2) P6-1190*572*770 (mm) weight: 131kg2) P6 1190 572 770 (mm) weight: 131kg
P6 flight case
weightweight
45
46. the screen back is neatthe screen back is neat
N i d hi h• Neat connection and high
quality cabinet make the
beautiful the back view of
rental screen. which enable
our customer to win the
exhibition.
• 。
46