3. http://www.routersupport.ca/d-link-router-error-codes.html
http://www.routersupport.ca/d-link-extender-setup.html
http://www.routersupport.ca/d-link-router-troubleshooting.html
http://www.routersupport.ca/d-link-router-technical-support.html
http://www.routersupport.ca/d-link-router-setup.html
Wired D-Link router login:
The most common method used for dlink router login is by direct connection, because the
average consumer only accesses the router configuration pages during its initial setup process
and never thinks about it again.
To open a dlink router login box by wired connection requires that you create a physical
connection between your wireless router and a working PC or laptop using an Ethernet cable.
1. Gather the following items; the D-Link DIR300 wireless router, the routers power supply,
and an Ethernet cable.
2. Using one end of the network cable attach it to "Port 1" on the back of your D-Link
router.It should be seated securely in the RJ45 port of the router.
3. Take the other end of the network cable and plug it into the RJ45/network port on your
computer that will be used to configure your D-Link wireless router.
4. Plug the D-Link DIR300 routers power cord to the back of the D-Link router.
5. With the power cord connected to the router plug the AC adapter into a working AC
outlet.
6. Let the router power up for approx 3mins until the router is at a ready state, and continue
on through the next section to sign in using your dlink router login.
Wireless D-Link router login:
If your D-Link wireless router has previously been setup, you can access your dlink login box
wirelessly by opening a web browser typing in your Dlink Router IP Address.
Step 1 Using your PC or Laptop open an Internet browser and go to the URL address line.
We'll be using the browser to access the D-Link router.
Step 2 In the URL address line type in: HTTP://192.168.0.1 and press the "Enter" key.>
The dlink router login box will appear on the screen, asking you to enter a username and
password. The username should be "admin" and the password should be left blank for most
models of dlink routers.
Step 3 Click the "Login" button to login to your router.
Step 4 If the username and password credentials are incorrect, and you want to see a list of
default Dlink Router Password credentials for most common wireless routers we do support.
Remote dlink router login:
4. http://www.routersupport.ca/d-link-router-error-codes.html
http://www.routersupport.ca/d-link-extender-setup.html
http://www.routersupport.ca/d-link-router-troubleshooting.html
http://www.routersupport.ca/d-link-router-technical-support.html
http://www.routersupport.ca/d-link-router-setup.html
D-Link wireless routers also have the ability to setup remote access to your routers configuration
pages in case you need to access them while on the go.
1. To setup dlink remote login ability, we need to configure your D-Link router to provide
outside access using one of its ports.
2. Once you've signed in using the dlink router login procedure under the wired router
access section, click on the "Maintenance" tab, and then the "Device Administration" sub
tab.
3. On the "Administrator Settings" page of your D-Link DIR300 wireless router, under the
section labeled "Remote Management", place a check in the box for the field "Enable
Remote Management".
4. If you want to only allow a particular IP address to access your router from the outside,
then type in the IP address in the field labeled "IP Allowed to Access:".
5. In the field labeled "Port:" leave the default settings of 8080
6. Click the "Save Settings" button to save the settings, and apply the changes we made to
the D-Link router.
Immediately call us if you still face difficulty in any of the above steps. Routersupport.ca will
help you instantly.