D Link wireless routers are the most suitable routers for you home network. These provide high performance and greater range of coverage upto 6000 sq.ft. It will provide you one seamless network which automatically connect devices to the strongest signal. You will get complete support for D Link Router and Extenders on our website. If you still face any Issue, you can contact Netgear Router Technical helpline number or Netgear Router Customer Assistance for help. Visit : http://routerhelpnumber.com/D-Link.php

1. D Link wireless routers are the most
suitable routers for you home network.
These provide high performance and
greater range of coverage upto 6000
sq.ft. It will provide you one seamless
network which automatically connect
devices to the strongest signal. You will
get complete support for D Link
Router and Extenders on our website.

3. How do I access the D link extender?
 Firstly plug the DAP-1520 into a wall outlet which is in the
wireless range of your router.
 Now open the wireless utility on your computer, then select the
name (SSID) of the DAP-1520 network and enter the password.
 Then start a web browser and enter the IP address in the URL bar
i.e. 192.168.0.50.
 The default username is admin and the password field is left
blank.
 Now click on login and then click on Netgear Setup Wizard.

5. How do I reset the D Link DAP
1520?
 Firstly plug the DAP-1520 upside down into the power outlet.
 The LED that is on the front will turn RED and then after a few
seconds it will turn ORANGE or GREEN depending if it was
previously setup.
 On the bottom of the DAP-1520 there is a reset pinhole.
 Now use a paperclip, press and hold the reset button for 10
seconds (or until the LED on the front turns red), and then let it
go.
 Now the DAP-1520 will then reboot and be at factory default
settings.
 For further help, you can contact Support for D Link Router.

6. How do I reset the DAP 1520?
 Firstly Connect a computer to the extender via an ethernet cable.
 Now using www.myWiFiext.net, start the login procedure where
you can access the D Link Router Login.
 Then after login go to the wireless settings into the setup.
 Then finally reconnect your WiFi device to the range extender.
 For any query, you can reach Support for D Link Extender.

7. How do I reset the D link DAP 1330?
 Firstly plug the DAP-1330 upside down into the power outlet.
 The LED that is on the front will turn RED and then after a few
seconds it will turn ORANGE or GREEN depending if it was
previously setup.
 On the bottom of the DAP-1330 there is a reset pinhole.
 Now use a paperclip, press and hold the reset button for 10
seconds (or until the LED on the front turns red), and then let it
go.
 Now the DAP-1330 will then reboot and be at factory default
settings.

8.  If you still face any Issue, you can contact Netgear
Router Technical helpline number or Netgear Router
Customer Assistance for help.
 If you can’t resolve your Issues you can contact
Support for Netgear D Link Router at
www.routerhelpnumber.com
 Feel free to contact us or drop a mail at
info@routerhelpnumber.com

9. Thank you for
Watching
chat with us now at
www.routerhelpnumber.com