Resetting a Ring Camera or Doorbell can be a helpful troubleshooting step when other methods fail to resolve issues. It allows you to restore the camera to its factory settings and reconnect it by following simple instructions. However, it's important to note that resetting should be the last option after attempting to fix the problem without resetting and identifying the exact issue. To reset your doorbell or camera, follow these steps: 1. Remove the faceplate of the doorbell. 2. Locate the reset button on the right side of the camera. 3. Press and hold the reset button for 15 seconds. 4. Release the button. The ring light on the front of the camera will flash a few times, indicating that the doorbell is restarting. 5. Your doorbell is now reset to its factory defaults. To reconnect and use your device, follow these steps: 1. Open the Ring app on your smartphone. 2. Tap the menu icon (☰). 3. Select "Devices" from the menu. 4. Choose the specific device you want to reboot. 5. Ensure that the device is connected to Wi-Fi. 6. Tap the "Device Health" tile. 7. Scroll down to find the option "Reboot This Device" and confirm your selection. 8. Allow your Ring device a few minutes to start up and reconnect. Following these instructions, you can successfully reset your Ring Camera or Doorbell and resume using it. If you need any type of assistance in resetting Ring doorbell or Ring camera, contact our team at +1-888-937-0088. Our Ring camera experts can assist with any problems related to Ring devices.

1. contact our team at +1-888-937-0088.
HOW TO RESET
RING DOORBELL
OR RING
SECURITY
CAMERA?
#RingCameraSupport
Ring Camera Support

2. Resetting a Ring Doorbell or
Ring security camera is a
straightforward process that
can help resolve various issues.
Whether you're experiencing
connectivity problems or need
to start fresh with your device,
here's a step-by-step guide on
how to reset your Ring
Doorbell or Ring security
camera:

3. Locate the reset
button
Depending on the model, the reset button
can be found on the back or side of the
device. It is usually a small button that may
require a pin or paperclip to press.

4. Press and hold the
reset button
Using a pin or paperclip, press and hold the
reset button for about 15 seconds. This
duration ensures that the reset process
initiates.

5. Observe the
device's light
After holding the reset button, keep an eye
on the device's indicator light. It will
typically flash or change colors to indicate
that the reset is in progress.

6. Release the reset
button
Once you see the indicator light changing,
release the reset button. The device will
then begin the reset process.

7. Wait for the device
to reset
Give your Ring Doorbell or Ring security
camera a few moments to complete the
reset process. The indicator light may
continue flashing or change colors during
this time.

8. Reconnect the
device
After the reset is complete, you'll need to
reconnect your Ring device to your
network. Follow the initial setup
instructions provided by the Ring app or
refer to the device's user manual for
detailed instructions on connecting it to
your Wi-Fi network.

9. Call us at +1-888-937-0088
Following these instructions, you can
successfully reset your Ring Camera or
Doorbell and resume using it. If you need
any type of assistance in resetting Ring
doorbell or Ring camera, contact our team
at +1-888-937-0088. Our Ring camera
experts can assist with any problems
related to Ring devices.