"Federated learning: out of reach no matter how close",Oleksandr Lapshyn
Training on autocad
1. SHRI GOVINDRAM SEKSARIA INSTITUTE OF TECHNOLOGY
AND SCIENCE
TRAINING ON
AUTOCAD
Presented by - Anshul Sharma
Enrollment No. - 0801ME181011
2. About the Institute
Indore | Founded in 2013
TECH CLUSTER Indore is well Known for its
Training l Internship l Placement Services Like
Interior Designing, Architectural Design,
Automotive/Automobile Designing, Product
designing, Aerospace Designing, HVAC Designing,
Fire Fighting, Mechatronics, Electrical Designing.
Tech Cluster is the best AutoCAD Training
Provider.
4. What is AutoCAD?
IT IS DEVELOPED BY AUTODESK COMPANY.
THE WORD AUTOCAD IS MADE UP OF TWO WORDS "AUTO(LOGO OF
COMPANY) "AND CAD "(COMPUTER AIDED DESIGN)".
IT IS A CAD-TYPE SOFTWARE ORIENTED TO DRAWING AND
MODELING IN 2D AND 3D.
6. The AutoCAD world is 3 dimensional. However, if we want to drawa 2d
object, such as a plan or a section, we will use only 2 dimensions (x and
y).
WCS (world coordinate system) is the imaginary plane that is parallel to
the ground. It is the default coordinate system. Modifications made to
the World Coordinate System (WCS) result in a User Coordinate System
(UCs).
It is the plane that you work on. It enables the user to draw 3
dimensional objectsS. To create a new UCS, type ucs on the command
window, then say New and specify 3 points on your new UCS plane.
WCS & UCS
7. Some 2D commands
CHAMFER
The chamfer command in AutoCAD is used to
create slanted edges.
FILLET
The fillet command is used to create rounded
edges between the adjacent lines and faces in
2D and 3D.
8. Some 2D commands
COPY
The copy command is used to copy the
objects. The concept is the same as Ctrl + C to
copy and Ctrl + V to paste, which can also be
used in AutoCAD.
MIRROR
The fillet command is used to create rounded
edges between the adjacent lines and faces in
2D and 3D.
10. 3D Modelling
We can use the 3D toolbar for readily accessible objects
like Box, Wedge, Cylinder, Sphere, Cone.
For more complicated shapes we can use boolean
opertaions like Union, Subtract, Intersection.
11. Some 3D commands
EXTRUDE
The Extrude command in
AutoCAD 3D is used to create a
surface or solid of a 2D surface
or a 3D curve.
12. Some 3D commands
REVOLVE
The Revolve command in
AutoCAD 3D is used to create a
3D solid or surface by sweeping
the object through its axis at a
predefined angle.
13. Some 3D commands
SWEEP
The 2D sub-object or object is
swept along an open or closed
path to create a 3D surface or
solid using sweep command.
14. Some 3D commands
LOFT
The loft command in AutoCAD is
used to create 3D solid or
surface. The 3D solid or surface
is formed within the space
between various cross sections.