An introduction to analysing signals using the Inspectrum tool by Tres Acton. Presented March 31st 2016 at Cyberspectrum Melbourne.
http://www.meetup.com/Cyberspectrum-Melbourne/ @TresActon
@sdr_melbourne
IAC 2024 - IA Fast Track to Search Focused AI Solutions
Inspectrum vs the doorbell
1. Cyberspectrum Melbourne - Inspectrum - brief version
(Tres Acton 31st March 2016)
Installing the tools used
To install the version of Inspectrum used in this demonstration:
git clone https://github.com/miek/inspectrum.git
git checkout waveform # this switches you to the branch ‘waveform’ to access the beta
features demonstrated
Once you’ve run the two commands above, follow the official installation instructions for
your OS (Mac or Linux): https://github.com/miek/inspectrum
After it is installed, you can run this tool by typing ‘inspectrum’ in a terminal session.
The tool that was used to capture the transmissions (that are later opened in Inspectrum)
is called osmocomm_fft. Installation instructions can be found
at: http://sdr.osmocom.org/trac/wiki/GrOsmoSDR
Once installed, you can run osmocom by typing ‘osmocom_fft’ in a terminal session