1. Terex TL Backyard Aerial Device
Product Overview
June 9, 2016

2. Terex TL Backyard Aerial Device
REACH
HIGH AND
WIDE
The Terex TL backyard
aerial device on an SDP
rubber tracked carrier offers
the height of a truck-
mounted aerial device
combined with the ability to
access restrictive job sites
like backyards, sidewalks,
alleys and other tight
spaces.

3. Capacities and Models
Model Working
Height
Side Reach Jib Capacity
TL37M 39’ 28.6’ Up to 900 lbs.
TL41M 43’ 31.1’ Up to 900 lbs.
TL45M 47’ 31.1’ Up to 900 lbs.
TL50P 52’ 36’ NA
TL55P 58’ 38’ NA

4. Standard Specifications: Aerial Device
Model Lower Boom
insulation Gap
Upper Boom
Retracted
insulation Gap
Upper Boom
Extended
Insulation Gap
TL37M 12” 18” 62”
TL41M 16” 18” 62”
TL45M 16” 18” 62”
TL50P 24” 38” 82”
TL55P 24” 58” 102”

5. Standard Specifications: Aerial Device
• 24” x 30” end mount bucket
• 350-lb bucket capacity with liner
• Category “C” per ANSI A92.2
• Hydraulic bucket leveling and bucket dump
• 4-function single stick controller
• 360º continuous rotation
• 24-gallon hydraulic oil reservoir
• Outrigger/boom interlock
• Safety harness and lanyard
• Travel stability
• 10º up and down
• 10º side to side
• Bucket liner
• Bucket cover
• Bucket rotator

6. Standard Specifications: SDP Carrier
SDP 50BA Rubber Tracked Carrier
• 36-HP Yanmar diesel engine, Tier VI compliant. 25
HP Tier VI FINAL available upon request.
• 51” wide w/ tracks extended
• 35 1/2 ” wide w/ tracks retracted
• Radial automatic telescopic outriggers
• Outrigger footprint: 13’2” x 13’9”
• Hydrostatic drive w/ skid steer type steering
• Automatic 2-speed drive
• (4) plastic outrigger pads w/storage
• ATO below rotation
• Corded remote drive/outrigger controls
Model Length Weight Ground Pressure
TL37M 17’9” 11,400 lbs. 4.5 psi
TL41M 19’ 11,600 lbs. 4.6 psi
TL45M 19’ 11,800 lbs. 4.7 psi
TL50P 23’10” 12,000 lbs. 5.0 psi
TL55P 24’11” 12,200 lbs. 5.1 psi

7. Standard Umbilical Remote w/Handheld
Radio Remote

8. Optional Radio Remote Drive/Outrigger
Controls
Remote operation (via umbilical cord) of drive and outrigger functions is
standard. An optional radio remote is available for these functions.

9. Bucket Controls
4-Function single stick controller that operates upper
boom up/down, lower boom up/down, extend/retract
and rotation is standard.

10. Bucket
24” x 30” End-mount bucket is standard. (or side mount
bucket with some jib options)
• A 180º bucket
rotator is
standard.
• A 105º bucket
rotator is standard
on units with side
mount jib.
• A 90º bucket
rotator is standard
on units with
optional 24”
bucket lifter and
side mount jib.

11. Outriggers
13’2” outrigger spread front/rear 13’9” outrigger spread side
Outriggers extend/retract automatically

12. Side Reach
Side reach out to 37’ (on TL55P) and 36’ (on TL50P)
models.

13. Access
Fits through a 36” gate

14. Material Handling Capabilities
Provides up to 900 lbs. material handling capabilities on
units to 47’ working height (up to 49’ with optional bucket
lifter).

15. Aerial Options
• 24” hydraulic bucket lifter,
increase working height 2’
• Auxiliary let down
• Multiple varieties of jibs
available

16. Carrier Options
• Radio remote for drive/outrigger function (in lieu of
tethered control)
• Forestry guards, engine cover and controls
• Outrigger motion alarm
• Tilt alarm
• 12V recovery winch (can be used at front or rear)
• Hydraulic oil cooler

17. Standard Equipment and Features
• CAT “C” (per ANSI A92,2)
• 24” x 30” bucket
• 360-degree continuous rotation
• Bucket rotator
• Engine start/stop @ bucket
• Engine 2-speed @ bucket
• Isolation platforms (per ANSI A92.2)
• 4-function controller
• Tool outlets below rotation
• Tool outlets at platform
• 2-speed track drive
• 350 lbs. bucket capacity
• Automatic hydraulic radial outriggers