2. A Portuguese based company which operates in Wind Energy Markets Globally. We have experience in many fields of Wind Energy - from project to Installation, covering all major activities. Experience with leading Manufacturers and with several MWs installed across the world. High Quality Standards and a very strict policy regarding Health and Safety standards, making this our motto for every project. www.mecwind.com project@mecwind.com About Us Introduction
4. Component storage on site is crucial for future erection and works. Our teams pre-pare and sketch all neces-sary layouts to prevent major time loss and project delays. We are also capable and experienced in the super-vision of loading and unloading components in ports and other storage facilities. www.mecwind.com project@mecwind.com WTG Installation Component Transport Preparation Work Component Erection Cable Work Inspections
5. Once all major components have arrived on site and before erection, several pre-paration works have to be carried out in order to cut down on many “man and crane hours”. Our teams are highly organised and expe-rienced with all major tasks, therefore performing an excellent work with the preparation tasks. www.mecwind.com project@mecwind.com WTG Installation Component Transport Preparation Work Component Erection Cable Work Inspections
6. We carry out component erection in accordance with the manufacturer’s standards and in a continuous manner, thus enabling us to complete erection within a couple of days. Once all major com-ponents are installed, it is possible to start mobilizing all lifting equipment for the next WTG. It Is crucial to use favourable wind conditions at the most. www.mecwind.com project@mecwind.com WTG Installation Component Transport Preparation Work Component Erection Cable Work Inspections
7. The works, after mechanical erection, are the most demanding and where most responsibility is undertaken by our team. Therefore they need to ensure that all necessary connections and cables are correctly posi-tioned so that no future hazards occur. Once we “close the door”, the turbine is ready for inspection and commissioning. www.mecwind.com project@mecwind.com WTG Installation Component Transport Preparation Work Component Erection Cable Work Inspections
8. MECWIND´s teams can undertake inspections on behalf of the manufacturer or the clients. Some of the most usual inspections are: Blade Inspections; Checklists; Torque Inspections; These are the final inspections before the Wind Turbine starts running and producing energy. www.mecwind.com project@mecwind.com WTG Installation Component Transport Preparation Work Component Erection Cable Work Inspections
9. Maintenance is one of the most critical tasks that have to be carried out on a regular basis and that determines how long the WTG can continue to produce and prevent major component exchange. Initial services can detect all unseen problems in previous inspections and therefore prevents hazards. www.mecwind.com project@mecwind.com WTG Service Initial Service (200-500h) Scheduled Services Major Component Exchange Composite Repairs (Fibres)
10. Our teams are highly expe-rienced in these types of services. Changing oil filters, checking torques, bolts, oil levels, cleaning, greasing and generator alignment are all the tasks included in these services. These tasks are carried out and reported to our clients or manufacturer. After completion we send photo reports proving every major task. www.mecwind.com project@mecwind.com WTG Service Initial Service (200-500h) Scheduled Services Major Component Exchange Composite Repairs (Fibres)
11. We are able to perform ma-jor component exchanges; such as generators, gear-boxes, blades, WTG up-grades and other com-ponents that suffer any type of damage and need to be exchanged, in order that the Turbine can start running and producing energy once more. www.mecwind.com project@mecwind.com WTG Service Initial Service (200-500h) Scheduled Services Major Component Exchange Composite Repairs (Fibres)
12. With Know-how and highly experienced technicians, we can repair fibre components, that most of the times, are damaged during transporta-tion. These repairs can be done on Nacelles, Hubs, Blades and Nose Cones, thus preventing major setbacks and time loss in transporta-tion, acquisition and other consequences from minor incidents. www.mecwind.com project@mecwind.com WTG Service Initial Service (200-500h) Scheduled Services Major component Exchange Composite Repairs (Fibres)
13. Mecwind can provide Project Managers, Site Managers, Site Supervisors and H&S Supervisor with capacity and Know-How for any type of project within Wind Energy. All members will have the necessary training and expertise to performe at their best and therefore ensure the Project is running frictionless. www.mecwind.com project@mecwind.com Project Managemante Project Manager Site Manager Site Supervisors H&S Supervisor
15. Project References www.mecwind.com project@mecwind.com Vensys Installation Pakistan – Jhimpir 5 x V62 Component transport Installation, Erection, Finishing and Ready for Commissioning
16. Project References www.mecwind.com project@mecwind.com Vestas Installation Portugal – Figueira da Foz 3 x V90 – 2,0 MW Installation, Erection, Finishing and Ready for Comissioning 5 days to complete Erection - including crane mobilization between platforms
17. Project References www.mecwind.com project@mecwind.com Vestas Installation (under Contruction) Portugal – Lagoa Funda 6 x V90 – 2,0 MW Installation, Erection, Finishing and Ready for Comissioning