Successfully reported this slideshow.
Your SlideShare is downloading. ×

2018 06 quick_guide_fox_en_print

Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Ad
Loading in …3
×

Check these out next

1 of 2 Ad
Advertisement

More Related Content

Similar to 2018 06 quick_guide_fox_en_print (20)

Advertisement

Recently uploaded (20)

Advertisement

2018 06 quick_guide_fox_en_print

  1. 1. A.R.C. Laser GmbH Bessemerstraße 14 90411 Nürnberg Germany  +49 911 21779-0  +49 911 217 7999 info@arclaser.de www.arclaser.de 2 1 11-2013 1 1)To modify the settings (Power/Pulse-on/ Pulse-off) of your pre-installed program, just click into the specific field. A bar will appear and you easily can modify the value via touchscreen. Use the Plus/Minus buttons for fine adjustment You may exit the screen with the save button. 2) Push the indication field and a selection field will open: either Energy in Joule, average Power per second or frequency in Hz. The activated icon will be automatically transferred on the main menu. 3)Press “Settings-Icon“ to enter the submenu. Press the Flash Drive icon to see its content. (The Flash- Drive has to be inserted) Next screen - last screen HOME Screen brightness Brightness aiming beam Frequency aiming beam Ready button brightness Volume Tone 4)FLash Drive Here you will find valu- able information concerning the FOX. First steps LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 4 LASER PRODUCT P=12 Watt, 810-1064 nm P< 2 mW, 532 nm 6)Charging the battery: Insert the sower supply into its socket at the rear side of the FOX. Switch on the device, enter your password, choose a surgeon and a program. Make sure to select a program - otherwise the charging process will not be started! The charging process is initiated when the orange LED lights up. If you switch off your FOX the charging process will continue. As soon as the battery is completely charged the orange LED will switch off. The green LED stays active. 5)Dust Cover: Protect your device with the dust cover when your laser is not in use. Settings Content flash drive Kurzanleitung_Nov2013.indd 2 21.11.2013 15:16:14 11.06.18 2018_06_FOX3_Kurzanleitung_en_alleine.indd 1 11.06.2018 16:50:25
  2. 2. 4321 4 2 1)Rear Panel: Following sockets are available at the backside of the Fox. Af- ter unpacking the Door Interlock connector (2) must be inserted. Power supply Door Interlock AUX 1 / AUX 2 Foot switch 6)Foot switch (cable version): Plug the foot switch into the adequate socket (4) When using a slit lamp the remote safety filter at socket No. 2 should be plugged in. To use the foot switch you have to unfold (push and open the protection). CAUTION LASER DIODE: Never open the housing! Keep the device from untrained persons. There are no serviceable parts inside the device. Maintenance and service operations can only be performed by authorized persons or A.R.C.-trained dealers. FOX - QuickGuide 2)Switch on: To start the FOX, unlock the Laser-Stop button. Press the both arrow-buttons until the green LED’s activate. The laser starts. It will take some seconds cause the laser will check some security circuits. 4)Preselect from the list of surgeon na- mes. Click OK and choose one of the available applications. Click OK and you will be guided to the Main Screen. 5)Insert the fiber as displayed. If perfectly inserted, you should hear a “click” 7)Start the laser: Push the black button, to switch to READY- Mode. The aiming beam is activated. 8)Switch off: By means of folding the foot panel you can switch off the laser. To protect your touch screen you can fold the foot plate completely. The Red Laser-Stop button should not be used to switch off the laser in your every days routine. WARNING! Always keep in mind, that you are using a laser device! Wear protective glasses! Enter Password 3)Enter Password: Please use the pass- word you received from our local dis- tributor. Surgeon A.R.C. Laser GmbH Pressing the foot switch will activate the laser. Every laser exposure is accompanied by an acoustic signal and the red LED at the fiber port will come on ev- ery exposure. Application Application 01 Application 02 Kurzanleitung_Nov2013.indd 1 21.11.2013 15:16:14 4321 4 Power supply Door Interlock AUX 1 / AUX 2 Foot switch )Foot switch (cable version): Plug the foot switch into the quate socket (4) n using a slit lamp the remote safety at socket No. 2 should be plugged in. se the foot switch you have to unfold h and open the protection). e device from untrained persons. There are no serviceable parts inside the rformed by authorized persons or A.R.C.-trained dealers. )Preselect from the list of surgeon na- mes. Click OK and choose one of the able applications. Click OK and you be guided to the Main Screen. )Switch off: By means of folding the foot panel you can switch off aser. To protect your touch screen can fold the foot plate completely. Red Laser-Stop button should be used to switch off the laser in every days routine. WARNING! Always keep in mind, that you are using a laser device! Wear protective glasses! Surgeon A.R.C. Laser GmbH Application Application 01 Application 02 21.11.2013 15:16:142018_06_FOX3_Kurzanleitung_en_alleine.indd 2 11.06.2018 16:50:26

×