This document summarizes the features and specifications of the HGM series of higher capacity calcite grinding machines. The machines can grind materials with a Mohs hardness of less than 9 to a fineness of 150-3000 mesh. Key features include high efficiency, long-lasting parts, safety and flexibility to adjust the fineness of materials ground. The machines also have low noise and dust pollution. Specifications for several models are provided including their dimensions, motor power and throughput capacities.

1. Higher Capacity Calcite Grinding Machine with CE/ISO
Product Description
Calcite grinding machine Application:
Feed Size: 10-20mm
Finished Size:150-3000mesh
Capacity: 0.4-30T/h
Materials: HGM series of Calcite grinding machine is mainly applied to the
processing of Mohs hardness of < 9 nonflammable and explosive of brittle materials,
such as: Coal, mica, talc, graphite, quartz, fluorite, calcite, dolomite, limestone,
kaolin, bentonite, barite, potassium feldspar, bauxite, coal gangue.
HGM series of ultra-fine grinding mill is widely used in paint, paper, paint, rubber,
plastic, packing, cosmetics, chemical products and other industries.
Calcite grinding machine introduction:
HGM series ultrafine grinding is based on years' experience of accumulated mill
production, absorbing the Swedish advanced mechanical manufacturing technology
is a new superfine powder and through the test and improvement for many years
and development (325-2500) processing equipment. It is the crystallization of
advanced technology, which is leading the world trend of the latest milling machine
Calcite grinding machine Features:
1. High Efficiency
Under the same finished final size and the same motor power, the capacity of Iron
Oxide Grinding Machine is twice as much as jet mill, mixing grinder and ball mill, and
energy consumption decreased 30%.
2. Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization, the lifetime
can reach 2-5 years for grinding calcite carbonate.
3. High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by

2. bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
4. The final fineness of the grinding materials can be adjusted between 325 meshes
and 2500 mesh (47-5 micron), and the product fineness can reach D97≤ 5μ M.
5. Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and
noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size
Calcite grinding machine Working Principle:
The main motor drives main axle and every layer rotating by the power of reducer.
Dial drives numbers of rollers rolling and rotating in the ring by pintles. Big materials
are crushed into small particles by hammer crusher. Then they are sent to store
house by elevator.
The complete set of HGM Calcite grinding machine:
The whole set of HGM Calcite grinding machine onsists of main mill, powder
classifier, speed reducer, blower, jaw crusher, bucket elevator, vibrating feeder,
storage bin, bag filter, pipe and fitting, cyclone powder collector, electric control
cabinet, electric motor, etc.
About CLIRIK
Shanghai Clirik machinery Co., Ltd located in Pudong New district of Shanghai, china,
a factory of 50,000 square meter for grinding mill plant production, another factory
of 40,000 square meter also in Shanghai for all kinds of crushers production.we are
near the Shanghai Pudong New Airport, only 15minites by car, Welcome you come

3. to visit our factory.
Inquiry Service
Please fill in your need products and your message and do not forget mail and/or
phone if you like to be contacted.
We are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,
1. What is the raw material do you want to process?
2. What is the capacity per hour do you need?
3. What is the raw material input size?
4. What is the output size of your product?
I hope you can tell me these details, i will give you the best quotation ASAP, thanks.
Your satisfaction is our greatest pursuit, we would like to sincerely for your service!
We look forward to your inquiry!
Model HGM80 HGM90 HGM100 HGM125 HGM168L
Ring Diameter(mm) 800 900 1000 1250 1680
Ring Number (PCS) 3 3-4 4 4 4
Roller Number(PCS) 18-21 24-29 28-36 30-44 30-40
Main Shaft Speed (r. p.
min)
230-240 200-220 180-200 135-155 120-130
Input Size (mm) ≤10 ≤10 ≤15 ≤15 ≤20
Finished Size (um/mesh)
74-5
(200-2500)
74-5
(200-2500)
74-5
(200-2500)
100-6
(150-2000)
100-9
(150-1500

4. Capacity (t/h) 0.4-4.5 0.6-6.5 1-9 2-16 3.8-30
Outlet Size L*W*H (m) 13.9*4*6.2 14.7*4.8*7.2 18*4.6*8.6 14*9*10.25 26.3*7.5*
Unit: KW HGM80 HGM90 HGM100 HGM125 HGM168L
Main Unit 55-75 2*45 132 185-200 315
Classifier 18.5 18.5 30 37-4*15 5*18.5
Blower 45 55 75 2*45-2*55 2*75-2*90
Crusher 18.5 18.5 18.5 45 75
Bucket Elevator 3 3 4 4 7.5
BeltConveyor Feeder 2.2 2.2 2.2 3 3
Spiral Conveyor 3 3 3-4 2*3 2*5.5
Discharging Valve 2*0.75 1*0.75 1*1.1 2*1.1 2*1.1 2*0.75-2*1.5
Air compressor 11 15 22 2*15-37 55
Remark:
For the data with prefix such as "2*xx",it means there are two motors
2*0.75,configuredfor one item Forexample,discharging valve,HGM80 with configuration i
means there are 2 pieces of 0.75KW motors installed with discharging valve.
If you want to know the price and other info about it,please connect with me.
Email：candyli@clirik.com
Phone：15021831484
Whatsapp：15021831484
Related Websites:
http://www.grindingmill.in/
www.ultra-mill.com
http://www.baritegrindingmills.com/
http://www.limestonegrindingmill.in/
www.crusher-plant.net
www.hammer-crushers.net