TEAC LOAD CELL TC-PF(T) For measurement of force exerted on the pedal during brake performance test of automobile

1. https://loadcell.jp/en/
TC-PF(T)
Load cell for automotive pedal force measurement
TEDS auto-configuration support
TC-PF(T)
The blue color shows
"within the judgement."
When the OK range is
exceeded, the background
becomes orange.
Check1
For measurement of force exerted on the pedal
during brake performance tests of automobiles!
Ultra-thin construction reduces a feeling
of strangeness during operation.
No slip even when pedaling strongly due
to adopting our unique anti slip sheet.
The bar meter display
realizes visibility equivalent
to analog meter.
Load cell to measure
automobile pedal force
24-bit/1kHz A/D conversion
Portable Digital Indicator
This can be fixed to the pedal
through hook-and-loop fastener.
Check2

2. The TC-PF(T) series is a pedal force meter that measures force exerted on the brake
pedal of automobiles.
It's thin and lightweight, also easy to install due to supporting various pedal shapes.
Furthermore, adopting a strong cable that is hard to break even with intense vibration,
it enables to verify hard/harsh braking, running on rough roads, and so on with actual
sense of pedal operation feeling.
In combination with Portable Digital
Indicator TD-01Portable, on-site
verification can be done easily.
Note : When installing, prepare a jig so that the pedal coming into contact with the bottom of the load cell can become flat separately, and fix the jig using 4-M3. The tap depth of 4-M3 is 2mm. Please be sure not to
exceed 2mm as it will cause malfunction. Two hook-and-loop fasteners to fasten are included. Please use them when fixing to the pedal. This product is non-waterproof.Please take that into account when using.
TC-PF
TC-PF
Brake pedal
Spacer
Cable
Supplied
hook-and-loop fastener
Assembly drawing
60
12.3
(1)
4
4
78
50
（30）
50
5
69
60
5
The parts without dimensions in the drawings are superseded by the actual object.
Anti slip sheet
t = about 1 mm
Topplate Material Aluminum alloy
Baseplate
Material equivalent
to SK4
500N、
1kN
150%R.C.
About 1 mV/V
（2000×10-6
stain）
±0.3%R.0.
±0.3%R.0.
±0.2%R.0.
± 10%R.0.
AC. DC. 8V
700Ω ± 5 %
700Ω ± 5 %
1000 MΩ or higher
0℃〜50℃
（Without condensation）
−10℃〜＋70℃
（Without condensation）
±0.5%R.0./10℃
±0.5%R.0./10℃
φ3 6-core shielded cable
3m direct connection
with NDI7P on the tip
NDI7P:PRC03-12A-10-7M
Built-in PRC03-12A-10-7M
Rated Capacity
Safe Overload Rating
Rated Output (R.O.)
Linearity
Hysteresis
Repeatability
Zero Balance
Safe Excitation Voltage
Input Terminal Resistance
Output Terminal Resistance
Insulation resistance
Compensated Temperature
Range
Safe Temperature Range
Temperature Effect
on Zero Signal
Temperature Effect
on Output
Cable
TEDS support
Specifications
Specifications
TD-01Portable
TC-PF(T)
Calibration precision
Nonlinearity
A/D conversion
Digital filter
Output voltage
TEDS function
Display
Display range
Calibration methods
Hold functions
Data recording
Power supply
Applicable standards
External dimensions (W×H×D)
Weight
Display
Display modes
Languages
Within 0.1% F.S.
Within 0.01% F.S. + 1 digit (when 5mV/V)
1000 times/second, 24-bit
Moving average (select from OFF,
16, 32, 64,128, 256, 512, 1024, 2048)
BNC：±2.0 V
IEEE1451.4 class 2 mix mode interface
2.4" color TFT LCD
Setting screens, indicator value digital
display, graph display, recorded data
list display, static strain display
Japanese/English
-99999 to 99999
Zero calibration/span calibration
(TEDS calibration, actual load
calibration, equivalent input calibration)
Sample hold, peak hold, bottom hold,
zone definition hold (peak, bottom)
Indicator value：300 maximum
Graph recording：8 maximum
4 alkaline or NiMH AA batteries USB bus
power (built-in Micro-USB B connector)
CE marking, VCCI (Class A), FCC (Class A)
Approximately 85mm × 140mm × 35mm
(without protrusions)
About 320 g (including batteries)
Load cell to measure
automobile pedal force
24-bit/1kHz A/D conversion
Portable Digital Indicator
TC-PF(T)
PRINTED IN JAPAN 0120 PDF・ISD-084 D-4MP_A4
Other company names and product names in this document are the trademarks or registered trademarks of their respective owners.
Features and specifications are subject to change without notice.
Precaution : To ensure safe handling and operation, read the Instruction Manual before use.
TEAC AMERICA INC.
E-mail: datarecorder@teac.com
TEAC EUROPE GmbH.
E-mail: ipd-sales@teac.eu
TEAC SALES & TRADING(Shenzhen) CO.,lTD.
E-mail: teacservice@teac.com.cn
Copyright© 2020 TEAC CORPORATION. All rights reserved.
1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan
E-mail: ipd_cs@teac.co.jp
Web: https://loadcell.jp/en/
loadcell.jp/en/
NIHON DENKEI CO. LTD.