Is your garbage disposal not working once again? Don't ever feel disappointed or seem helpless. Let us provide a simple outline to help you repair the faults. Read on for more information...

1. Garbage Disposal Not Working:
Easy Steps To Solve Your
Problem

2. When you discover your garbage disposal
not working, this step by step checklist can
serve as a troubleshooting guide.
My definition of "garbage disposal not
working" means that when you turn on the
switch, the unit is not running (or operates)
and there is no humming sound.

3. For such cases when your home unit
cannot be turn on and no humming
sound coming from the motor, one of the
obvious causes might be an electrical
problem.
Just follow the step by step checklist
outline to fix the problems.

4. Step 1:
Firstly, check to ensure that the power
cord of your disposal is plug in.
Confirm that the disposal is not working
again before you proceed to the next
step.

5. Step 2:
Locate the reset button which should be
at the bottom or the side of the unit and
press it to reset.
Note: When you see the reset button
sticking out, it means the unit has tripped.
You need to push the button inwards to
reset the disposer.

6. Step 3a:
If the garbage disposal is still unable to
start, the next step is to check whether
the circuit breaker in the electrical service
panel has tripped or turned off.

7. Step 3b:
When the circuit breaker trips again after
resetting, it means that there is a current
overload or a short circuit on the circuitry.
If you are in this scenario and dont have
any electrical background or circuit
breaker troubleshooting skills, its best to
consult a technician to rectify the fault.

8. Step 4a:
When everything is in order and the
garbage disposal not working, the next
move is to check the power switch which
is located on the wall or under the sink.
Turn off the circuit breaker and unplug the
power cord.
Open the unit switch housing to check for
any loose wiring or broken wire.

9. Step 4b:
If the switch is faulty, replace it with a new
one.
Before turning back the power to the unit,
we are going to do 1 more extra step by
checking the wire termination to the unit.
Connection to the motor is at the base of
the unit.

10. Step 4c:
Remove a small cover at the bottom of
the garbage disposer to access the wires
connection.
Check for any loose connection or broken
wires. If everything is in order, put back
the cover.

11. Step 5:
Turn on the circuit breaker and switch on
power to the garbage disposal.
By this stage, if the disposal still does not
turn on, the final step is to use a voltage
meter to measure the voltage across the
switch box terminal.
If you are unsure about this step, consults
omeone with electrical background or a
technician.

12. Step 6:
If the require voltage is present, we can
conclude that you need to repair the unit
or get a new replacement.

13. We hope that the above step by step
checklist to troubleshoot garbage disposal
is useful, especially when you find your
garbage disposal not working.
Does your existing home garbage
disposal give you problems? If youre tired
of the constant breakdowns, it is time to
get a new replacement.

14. There is a guide where it shows you 5 easy tips
of choosing the best garbage disposal.
Click The Link Below:
http://onlineshoppingdeals21.blogspot.com
to read about the 5 easy tips because you are
absolutely going to benefit from it.

15. We have also made an effort to search for
the top quality and best rated garbage
disposal in the net.
The outcome reveals that Waste King
Legend 8000 is one of the best within the
market.
This product has gathered a ton of good
reviews from customers and becomes a
best seller in Amazon.

16. We have also written a comprehensive review so
that you can determine if it is the one for you.
In order to read the reviews,
Click The Link Below:
http://garbagedisposaltips.blogspot.com