How to setup Netgear Ex7300 as Range Extender. Explain Netgear Ex7300 setup through WPS and to configure your EX7300 as an Access Point. Firstly, Connect your router using an Ethernet cable to any accessible Ethernet ports of your EX7300. Secondly, Use your Wi-Fi network manager on your wireless PC or any Wi-Fi device to connect to the NETGEAR_EXT network. After that, Once connected, the Device to Extender LED will turn to solid green.
Setup Netgear Ex7300 as Range Extender | mywifiext.net
1. Setup Netgear Ex7300
Setup Netgear Ex7300
as Range Extender
as Range Extender
Mywifiext.net | mywifiext.net setup
Quick Start
2. Netgear EX7300 Manual: When you buy a brand new
AC2200 EX7300 extender, you will get a manual in
the package. This Netgear EX7300 Manual contains
a series of setup steps from starting to ending. All
you have to do is simply walk through these Netgear
Nighthawk X4 AC2200 EX7300 Setup steps and make
your extender up and running within minutes.
However, understanding these installation
instructions is very difficult for regular users.
Netgear EX7300 Manual:
Mywifiext.net
4. 28%
23%
22%
16%
11%
HIT WPS ON THE ROUTER OR YOUR MAIN WI-FI
UNIT IN AROUND ONE MINUTE.
PRESS THE WPS ON THE NETGEAR EX7300
EXTENDER.
ENSURE THAT THE SWITCH ON THE EXTENDER IS
TOWARDS EXTENDER.
WHEN THE POWER LED ON THE EXTENDER TURNS
AMBER IT IMPLIES IT IS READY FOR SETUP.
FIRSTLY, PLUG IN THE NETGEAR EX7300 SETUP
EXTENDER NEARER TO YOUR ROUTER FOR A
SMOOTHER AND QUICKER WPS CONNECTION.
Netgear Ex7300
Netgear Ex7300
setup through WPS
setup through WPS
Mywifiext.net
Mywifiext.net
NOTE: – ENSURE THAT DISCONNECT ETHERNET CABLE BEFORE RESETTING THE EXTENDER.