Report
Share
Download to read offline
Recommended
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Recommended
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land
that is devoted primarily of agricultural process with the primary objective of producing food and other
commercial crops. Or an area of water that is devoted primarily to agricultural process in order to
produce and manage such commodities as fibers, grains, livestock or fuel.
The process of working the ground, planting seeds and growing of planting known as farming.it can
described s raising of animals for milk and meat as farming.
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
What is an Engine?
Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power.
The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine.
These processes include:
The suction of air (also known as breathing or aspiration).
Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form.
Igniting the air-fuel mixture with a spark (petrol engine).
Burning of highly atomized fuel particles which results in releasing / ejection of heat energy.
How does an Engine work?
The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons.
This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels.
A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.
In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor.
In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines
used for speeding up agriculture production.
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind.
Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere
In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.
Hydro electric power report-AE 215 2018
Water power or Hydropower is power derived from the energy of free falling water which may
be harnessed for useful purposes. Hydroelectricity is the term referring to electricity generated
by hydropower which implies the production of electrical power through the use of the
gravitational force of falling or flowing water. It is the most widely used form of renewable
energy, accounting for 16 percent of global electricity generation..The cost of hydroelectricity is
relatively low, making it a competitive source of renewable electricity. The average cost of
electricity from a hydro plant larger than 10 megawatts is 3 to 5 U.S. cents per kilowatthour.
Hydro is also a flexible source of electricity since plants can be ramped up and down very
quickly to adapt to changing energy demands. However, damming interrupts the flow of rivers
and can harm local ecosystems, and building large dams and reservoirs often involves displacing
people and wildlife. Once a hydroelectric complex is constructed, the project produces no direct
waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2)
than fossil fuel powered energy plants.
SOLAR ENERGY - FARM POWER REPORT AE 215
Solar energy is a renewable energy, therefore have the following advantages
1. Once solar panels are installed, they produce energy without generating waste or pollution. They operate with little maintenance or intervention.
2. Solar electric generation is economically competitive where grid connection or fuel transport is difficult, costly or impossible. For example: satellites, island communities, remote locations and ocean vessels.
3. Once the initial capital cost of building a solar power plant has been met, operating costs are low when compared to other existing power technologies.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
NUMERICA METHODS 1 final touch summary for test 1
MY FINAL TOUCH SUMMARY FOR TEST 1
ON 6TH MAY 2018
TOPICS AND MATERIALS COVERED
1. Class lecture notes (Basic concepts, errors and roots of function).
2. Lecture’s examples.
3. Past Years Examples.
4. Past Years examination papers.
5. Tutorial Questions.
6. Reference Books + web.
NUMERICAL METHODS 1 TUTORIAL QUESTIONS
Using the solutions obtained in parts (a) and (b) above to explain why initial
errors should need to be avoided as much as possible.
There is greater variation of solutions obtained in parts (a) and (b) due to initial errors as from (x , y)=(2.415,0) to (1.1) respectively , therefore should be avoided as much as possible to reduce variation of solutions.
MACHINE DESIGN QUESTION BANK ...
The document contains 38 questions related to machine design. The questions cover topics such as standardization of sizes, tolerances, fits, design of joints, shafts, levers, frames and other machine elements. Design calculations are required to determine dimensions that satisfy given loading and stress criteria. Materials, their properties and appropriate factors of safety are provided. References for solutions and examples are given from standard machine design textbooks.
IMPACT TEST REPORT ...
In the material testing laboratory, a Charpy impact test was performed on three different types (hot,cold,and steel alloy)of steels testing each variety at four different temperatures (32°C(RT), 100°C,0°C and -22°C ). From results (shown below), we determined that the a transition is from ductile failures to brittle failures
TENSILE TEST REPORT
In the material testing laboratory, Tensile test was done on a mild steel specimen as figure 4 to identify the young’s modulus, ultimate tensile strength, yield strength and percentage elongation. The results were as table 1
More Related Content
More from musadoto
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land
that is devoted primarily of agricultural process with the primary objective of producing food and other
commercial crops. Or an area of water that is devoted primarily to agricultural process in order to
produce and manage such commodities as fibers, grains, livestock or fuel.
The process of working the ground, planting seeds and growing of planting known as farming.it can
described s raising of animals for milk and meat as farming.
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
What is an Engine?
Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power.
The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine.
These processes include:
The suction of air (also known as breathing or aspiration).
Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form.
Igniting the air-fuel mixture with a spark (petrol engine).
Burning of highly atomized fuel particles which results in releasing / ejection of heat energy.
How does an Engine work?
The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons.
This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels.
A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.
In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor.
In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines
used for speeding up agriculture production.
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind.
Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere
In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.
Hydro electric power report-AE 215 2018
Water power or Hydropower is power derived from the energy of free falling water which may
be harnessed for useful purposes. Hydroelectricity is the term referring to electricity generated
by hydropower which implies the production of electrical power through the use of the
gravitational force of falling or flowing water. It is the most widely used form of renewable
energy, accounting for 16 percent of global electricity generation..The cost of hydroelectricity is
relatively low, making it a competitive source of renewable electricity. The average cost of
electricity from a hydro plant larger than 10 megawatts is 3 to 5 U.S. cents per kilowatthour.
Hydro is also a flexible source of electricity since plants can be ramped up and down very
quickly to adapt to changing energy demands. However, damming interrupts the flow of rivers
and can harm local ecosystems, and building large dams and reservoirs often involves displacing
people and wildlife. Once a hydroelectric complex is constructed, the project produces no direct
waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2)
than fossil fuel powered energy plants.
SOLAR ENERGY - FARM POWER REPORT AE 215
Solar energy is a renewable energy, therefore have the following advantages
1. Once solar panels are installed, they produce energy without generating waste or pollution. They operate with little maintenance or intervention.
2. Solar electric generation is economically competitive where grid connection or fuel transport is difficult, costly or impossible. For example: satellites, island communities, remote locations and ocean vessels.
3. Once the initial capital cost of building a solar power plant has been met, operating costs are low when compared to other existing power technologies.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
NUMERICA METHODS 1 final touch summary for test 1
MY FINAL TOUCH SUMMARY FOR TEST 1
ON 6TH MAY 2018
TOPICS AND MATERIALS COVERED
1. Class lecture notes (Basic concepts, errors and roots of function).
2. Lecture’s examples.
3. Past Years Examples.
4. Past Years examination papers.
5. Tutorial Questions.
6. Reference Books + web.
NUMERICAL METHODS 1 TUTORIAL QUESTIONS
Using the solutions obtained in parts (a) and (b) above to explain why initial
errors should need to be avoided as much as possible.
There is greater variation of solutions obtained in parts (a) and (b) due to initial errors as from (x , y)=(2.415,0) to (1.1) respectively , therefore should be avoided as much as possible to reduce variation of solutions.
MACHINE DESIGN QUESTION BANK ...
The document contains 38 questions related to machine design. The questions cover topics such as standardization of sizes, tolerances, fits, design of joints, shafts, levers, frames and other machine elements. Design calculations are required to determine dimensions that satisfy given loading and stress criteria. Materials, their properties and appropriate factors of safety are provided. References for solutions and examples are given from standard machine design textbooks.
IMPACT TEST REPORT ...
In the material testing laboratory, a Charpy impact test was performed on three different types (hot,cold,and steel alloy)of steels testing each variety at four different temperatures (32°C(RT), 100°C,0°C and -22°C ). From results (shown below), we determined that the a transition is from ductile failures to brittle failures
TENSILE TEST REPORT
In the material testing laboratory, Tensile test was done on a mild steel specimen as figure 4 to identify the young’s modulus, ultimate tensile strength, yield strength and percentage elongation. The results were as table 1
More from musadoto (20)
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Fluids mechanics (a letter to a friend) part 1 ...
Fluids mechanics (a letter to a friend) part 1 ...
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Materials Technology for Engineers pre-test 1 notes
Materials Technology for Engineers pre-test 1 notes
Recently uploaded
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdবাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Recently uploaded (20)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Pengantar Penggunaan Flutter - Dart programming language1.pptx
Pengantar Penggunaan Flutter - Dart programming language1.pptx
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...