2. ISA-RP2.1-1978 MANOMETER TABLES
ISA-MC96.1982 TEMPERATURE MEASUREMENT
THERMOCOUPLES
ISA-5.1-1984(R1992) INSTRUMENTATION SYMBOLS AND
IDENTIFICATION
ISA-5.2-1976(R1992) BINARY LOGIC DIAGRAMS FOR
PROCESS OPERATIONS
ISA-5.3-1983 GRAPHIC SYMBOLS FOR DISTRIBUTED
CONTROL/SHARED DISPLAY INSTRUMENTATION,
LOGIC, AND COMPUTER SYTEMS
ISA-5.4-1991 INSTRUMENT LOOP DIAGRMAS
ISA-5.5-1985 GRAPHIC CYMBOLS FOR PROCESS DISPLAYS
3. ANSI/ISA-7.0.01-1996 QUATLITY STANDARD FOR
INSTRUMENT AIR
ANSI/ISA-60079-0(12.00.01)-2005 ELECTRICAL APPARATUS
FOR USE IN CLASSI, ZONES 0, 1 & 2 HAZARDOUS
(CLASSIFIED) LOCATIONS: GENERAL REQUIREMENTS
ANSI/ISA-12.01.01-1999 DEFINITIONS AND
INFORMATION PERTAINING TO ELECTRICAL
INSTRUMENTS IN HAZARDOUS (CLASSIFIED)
LOCATIONS
ANSI/ISA-60079-11(12.02.01)-2002 ELECTRICAL APPARATUS
FOR USE IN CLASS I, ZONES 0, 1 & 2 HAZARDOUS
(CLASSIDIED) LOCATIONS – INTRINSIC SAFETY “i”
ISA-60079-27(12.02.04)-2006 FIELDBUS INSTRINSICALLY
SAFE CONCEPT (fisco) AND FIELDBUS NON-
INCENDIVE CONCEPT (fnico)
4. ANSI/ISA-12.04.01-2004 Electrical apparatus for explosive gas
atmospheres Part 2 Pressurized enclosures “p”
ANSI/ISA-RP12.06.01-2003 Recommended practice for wiring
methods for hazardous (classified) locations instrumentation
Part 1: Intrinsic safety
ISA-12.10-1988 Area classfication in hazardous (classified) dust
locations
ANSI/ISA-12.13.01-2003 Performance requirements for
combustible gas detectors
ANSI/ISA-TR12.13.01-2003 Fammability characteristics of
combustible gases and vapors
ANDSI/ISA-TR12.21.01-2004 Use of fiber optic systems in
class 1 hazardous (classified) locations
5. ISA-20-1981 Specification forms for process measurement and
control instruments, primary elements, and control valves
ISA-RP31.1-1977 Specification, installation, and calibration of
turbine fowmeters
ISA-37.1-1975 (R1982) Electrical transducer nomenclature and
terminology
ISA-RP37.2-1982 (R1995) Guide for specifications and tests
for piezoelectric acceleration transducers for aerospace
testing
ISA-37.3-1982 (R1995) Specifications and tests for strain gage
pressure transducers
ISA-37.16.01-2002 A guide for the dynamic calibration of
pressure transducers
6. ANSI/ISA-67.01.01.2002 Transducer and transmitter
installation for nuclear safety applications
ANSI/ISA-67-02.01-1999 Nuclear safety related instrument
sensing line piping and tubing standard for use in nuclear
power plants
ISA-71.01-1985 Environmental conditions for process
measurement and control systems: temperature and
humidity
ISA-71.02-1991 Environmental conditios for process
measurement and control systems: power
ISA-71.03-1995 Environmental conditions for process
measurement and control systems:mechanical influences
ISA-71.04-1985 Environmental conditios for process
measurement and control systems: airborne contaminants
7. ANSI/ISA-75.05.01-2000 (R2005) Control valve terminology
ANSI/ISA-75.19.01-2001 Hydrostatic testing of control valves
ISA-TR84.00.02, Part 1 – Safety instrumented functions (SIF) –
safety integrity level (SIL) Evaluation techniques. Part 1:
Introduction
ISA-TR84.00.02, Part 2 – Safety instrumented functions (SIF) –
safety integrity level (SIL) Evaluation techniques. Part 2:
Determining the SIL of a SIF via simplified equations
ISA-TR84.00.02, Part 3 – Safety instrumented functions (SIF) –
safety integrity level (SIL) Evaluation techniques. Part 3:
Determining the SIL of a SIF via fault tree analysis
ISA-TR98.00.02-2006, Skill standards for control system
technicians