1. FRONIUS IG SIGNAL CARD
FRONIUS IG Signal Card
The FRONIUS IG Signal Card is a plug & play card that sends you audiovisual
warnings in the event of status changes in the inverter. The FRONIUS IG Signal
Card works autonomously; it requires absolutely no other components of the
FRONIUS IG DatCom system. However, you can operate both systems in parallel.
The Signal Card becomes active if any fault occurs that is signalled to the inverter.
A floating contact is actuated and a warning signal is sounded.
As an option you may also connect a warning light to provide a visual signal.
The FRONIUS IG Signal Card may be added as a retrofit at any time, as well.
Attention:
As there is no compatibility with the FRONIUS IG Signal Card, inverters of the FRONIUS IG
series with the serial number 14330071 or lower can not be retrofitted.
TECHNICAL DATA
Power supply (from the solar modules) 5V DC
Dimensions (l x w x h): 140 x 100 x 26 mm
Maximum switching characteristics of the relay
* DC-voltage (UDC) 50 V
* DC-current (IDC) 1A
* AC-voltage (UAC) 250 V
* AC-current (IAC) 4A
Maximum cable cross-section: 1,5 sq.mm / cable
3-polige 0,75 sq.mm sheathed
Recommended cable: cable
Fronius Article Numbers
FRONIUS IG Signal Card integrated 4,240,012
FRONIUS IG Signal Card retrofit 4,240,012,Z
08/2005 1/1