The Automatic Pick And Place System is inspected product tray will transfer from inspection conveyor to the in feed conveyor of the machine and also pass into film feeding and sealing section.

1. PNEUMATICS: Festo
MOTOR: BHARAT BIJLEE
PLC: OMRON / TECNIK
HOT KNIFE SEALING: Al. Alloy with Teflon coating
SEALING PAD: Soft Silicone Rubber.
CONTACTORS: Telemechanique or Reputed
CONTROLS: Selectron /Reputed make.
CONVEYORS: Roller conveyor
AUTOMATIC PICK AND PLACE SYSTEM
In feed section:
The in feed section would accept input from a single conveyor on which the products would arrive in single lane after
putting matrix in tray and inspection. This inspected product tray will transfer from inspection conveyor to the in feed
conveyor of the machine and pass into film feeding and sealing section.
Pick and Place OR down stacker Section
The Pick and place system uses three directional movement arm which is foldable and it can take care of different size
cartons. Arms movement is pneumatically operated for the remote places where the power fluctuation is more so it may
create the problem in the operation system.
The sealing system comprises of a hot knife design with special Teflon coated for P.E. films. (optional for outer LDPE covers)
When product passes through the in feed conveyor and reach to sealing area sensors senses the product and passes the signals to the pneumatically operated sealing bar. Therefore,
the cylinder retracts and sealing jaw comes down. After the seal made, it retracts. Then cool air thrown on the seal to achieve a strong seal.
TECHNICAL SPECIFICATIONS:
MAKES OF THE COMPONENTS for PICK AND PLACE: