The document discusses various types of component feeders used in surface mount technology (SMT) assembly processes. It describes radial tape feeders, axial tape feeders, tube feeders, vibratory bowl feeders, stacked horizontal tube feeders, label feeders, and solder preform feeders. It provides information on their functions, benefits, and specifications. The document also provides contact details for the company that manufactures these feeders.

1. www.smthelp.com
Pluggable material
reference

2. www.smthelp.com

3. Radial Tape Feeder
SRF-1001
http：//www.smthelp.com
RTF-2001

4. General Taping Requirements
1. Electronic component diameter: round 3-10m
2. Square width: 5-10mm length 5-25
3. Electronic component height: 5-25mm
4. Tape hole spacing: 12.7 or 25.4
5. Pin diameter: 0.4-1.0mm
6. Pin spacing: 5-25mm
7. Cutting foot length: 2.5-5.0mm
8. Feeder drive: motor drive
9. Electronic component packaging: tape
packaging
10. Feeder size: 500*100*165 mm L/W/H
11. Applicable machine brand：JUKI

5. Tape and component dimensions

6. http：//www.smthelp.com
Radial series ,The through-hole feeder for mounter/odd-form machine.
*The Radial is a revolutionary new concept from Southern Machinery that allow the
placement or insertion of both surface mount and through-hole components. Can
adaptive most of mounter.
Auto insertion
with mounters:

7. *General Taping Requirements
Component Data for 12.7 mm and 15.0 mm (0.50 in. and 0.59 in.) Pitch Tape

8. *Taped Component Removal Pull Testing
The taped components shall unwind (reel and cassette) or unfold (ammo-pack)
with a force not to exceed 5 Newtons (17.9 oz.). Pull test shall be applied as
illustrated in Figure 43.

9. *Input Tape Splicing
Component can be spliced with an acceptable splicing tape. Universal splicing
tape is recommended. Splices must not interfere with tape feed holes and overall
tape thickness, including tape, leads, and tape splices, shall not exceed 1.5 mm
(0.059 in.).

10. http：//www.smthelp.com
Square width ø2-ø10mm
Component spacing 5mm、10mm、15mm、20mm
Pin diameter: 0.4mm-1.0mm
Cutting foot length 2.5mm-5mm
Feeder drive Pneumatic drive
speed 1.5s-2s 1pcs
Electronic component packaging tape packaging
Feeder size 700（L)x100（W）x165（H)
Axial Tape feeder

11. http：//www.smthelp.com
The Horizontal Stacked Tube Feeders . are high volume, high speed
component feeding systems that are capable of feeding a variety of
components, ranging from SMT devices to odd-form components.
They feed components directly from the shipping magazines/tubes, or
from in-process handling tubes. The tubes are stacked in the feeder
horizontally. The components are pushed out of the bottom tube and
to the pickup point by a pusher tape. automatically eject the empty
tube and index the next tube into the feeding position.
Key Benefits
Ideal for feeding a wide variety of component packages .
Dispenses components from their shipping tubes.
Continuous feeding. Automatically changes tubes when one becomes
empty.
Handles a large inventory of components. Full tubes of components
can be added to the top of the stack at any time.
Ideal for use with components that can not be gravity fed because
they are unstable for gravity feeding.
Short cycle time ensures fast pick and place.
Your investment in feeders is protected from obsolescence. Whenever
your product design changes or new products are developed, feeders
can be inexpensively converted by Tube Feeders Inc. to feed the new
component.
Control and communication by Programmable Logic Controller.
Intuitive, informative Touch Screen Display panel provides all control
functions for the operator and complete troubleshooting functions for
maintenance or machine repair
Horizontal Stacked Tube Feeders RTE-408

12. http：//www.smthelp.com
Vibratory Bowl Feeder
These CNC machined parts feeders are applicable
for precision components for the electronics and
semiconductor industry (e.g. QFN, LED chips,
MLCC, SOT packages and etc).

13. LABEL FEEDER.
http：//www.smthelp.com
Reduce cost, improve quality and eliminate hand assembly. insulators,
interconnect, shields, antennas . It automatically feeds and peels media from
liner and presents for pick-up.Most applications with media size 3x3 to
3x28mm (width x length) can be picked with standard nozzles.
Customer configurations available for < 3mm applications. Platform for up to
58x50mm (width x length) also available.
Simple.Easy to use user interface with push button controls.
User serviceable modular design.

14. http：//www.smthelp.com
The use of the solder plate is to add thickness to some components that requires
more solder (3 pins transistors, USB jack pins, etc.) - PCB will still undergo normal
solder paste printing process and this solder plates will be mount- ed by pick and
place machines (a little off-set to the pad with solder paste on it). Then component
will also be mounted on the pad.
The purpose of the feeder is to lessen the cost by taking out costings on
component reels or other solutions that is currently implemented in SMT production
process.
Label Feeder.
vibratory Bowl Feeder.
stacked horizontal
Feeder .
Solder Preform SMT
feeder
Tube Feeder
Axial Tape Feeder
Radial Tape Feeder .

15. Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, Google：Auto+Insertion
6, Looking forward to your email: shaoyong@smthelp.com