bevel gear screw jack,high speed screw jack,quick lifting screw jack,gear ratio 1:1 screw jack features:
1. Load capacity 25kN to 500kN. When full load, worm torque high speed 92Nm to 4712Nm, low speed 46Nm to 2828Nm.
2. Lift screw diameter 30 mm to 120 mm, screw pitch 6 mm to 16 mm.
3. High gear ratio 1:1, low gear ratio 2:1.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Difference from worm gear screw jack, driven spindle by spiral bevel gear sets.
5. Manual operated bevel gear screw jack by hand wheel or hand crank, or electrically operated bevel gear screw jack by 3-phase or single phase motor or gear motor.
6. Processing lift screw stroke according to clients needs. Under max. compression load, without guides 250mm to 1000mm stroke, with guides 400mm to 2000mm stroke. Under tension load, max. 1500mm to 5500mm stroke.
7. Lift screw end fittings include top plate, clevis end, plain end and threaded end.
8. Full synchronization bevel gear screw jack system, doesn't require right angle bevel gearbox to transmit torque and power, bevel gear screw jacks are directly connected by line shaftings and couplings.
9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.