This document provides information about Marcel Electronics International, a privately owned electronics company founded in 1979 with annual sales of $160 million and 42,000 square feet of facilities. It has 160 employees and certifications in quality management and defense industry manufacturing. The document discusses benefits of design reviews and technology certifications. It provides instructions for transferring design files for printed circuit board fabrication via email or FTP with preferred file formats.

1. 2011 Rev 0505

3. Privately Owned

4. Healthy Balance Sheet

5. 42,000 Sq. Ft.

6. 160 Employees

7. ISO 9001:2008

8. ITAR Certified

10. Military and Aerospace Applications

11. Thermal Considerations

12. High Speed Antenna Applications

14. Technology Roadmap

15. Technology Roadmap

16. Technology Roadmap

17. File Transfer Instructions Preferred data formats: Gerber (274 or 274X) or Valor ODB++, drill files should be in ASCII format, fabrication drawings as Gerber, HPGL, HPGL2 or AutoCAD DXF / DWG files. An IPC D-356 netlist is highly recommended for crosscheck against Gerber files and for electrical testing. Data files and drawings should be compressed together into either ZIP (WinZip) or TGZ (UNIX) files to reduce file size and speed up the file transfer process Alternative data types or compression schemes may be acceptable by agreement. EMAIL Attach your files to an email and send to data@mei4pcbs.com . Attached flies should be no larger than 15 MB (15,000 KB) although we have the capacity to accept up to 50 MB files. Please keep in mind that your own email server may be a limiting factor in your ability to send large file attachments. FTP Using FTP client software (such as WS-FTP) you can send files via FTP with no file size limits. FTP hostname: ftp.mei4pcbs.com IP address is 65.170.125.60 username: mei/marcel <------all lower case exactly as shown, using forward slash ( / ) password:mei4qta <-------all lower case exactly as shown Upload your files to INCOMING directory (directory name is not case sensitive). Also, be sure to use PASSIVE mode for compatibility with our firewall. If using WS-FTP this setting is found on the “Properties” page under “Advanced” tab. Please contact our Customer Service Department by phone (714) 974-8590 if you prefer to have your own FTP username, password and directory or if you experience any problems with the transfer..

18. Thank You! 130 W. Bristol Lane Orange, California 92865 Tel. 714-974-8590 www.mei4pcbs.com