Don't let water quality testing slow you down. Benchtop Tester is compact, easy to use, and provides reliable results for multiple parameters. For more, visit Labozon.com!

1. Overview
Multiparameter Benchtop Tester LZ-WQT-B100 compact, reliable, and
easy to use multiparameter water quality tester. The unit features
comply with controlled and systematic digital display for measuring
different water quality parameter including pH, ORP, Ion, Conductivity,
Resistivity, Salinity, TDS, Dissolved oxygen meter. It features aranges of
Multiparameter Benchtop
Tester LZ-WQT-B100
www.labozon.com | info@labozon.com

2. features automatic temperature compensation, real-time clock stamp,
and customs calibrations solution with USA, NIST, DIN standard pH
buffer solution.
Specifications :
Type Benchtop
Display Digital
pH
Range -2.00 to 20.00 pH
Accuracy ±0.002 pH
Calibration Point 1 to 5 ponit
Calibration
Solution
USA, NIST,DIN
ORP
Range
-1999.9 to1999.9
mV
Accuracy ±0.2 mV
Calibration Point 1 Point
Calibration
Solution
mV & Relative mV

3. ION
Range
0 to 19999 ppm, mg/l,
mol/l, (depending on
range of ISE)
Accuracy
±0.5% F.S
(Monovalent) ±1%
F.S(Divalent)
Calibration
Point
2 to 5 point
Calibration
Solution
0.001, 0.01, 0.1, 1, 10,
100, 1000, 10000 ppm,
mol/l
Conductivity
Range
0 to 20, 200,
2000 µS/cm, 20,
200 mS/cm
Accuracy ±0.5% F.S
Calibration Point 1 to 5 point
Calibration
Solution
10, 84, 1413,
µS/cm, 12.88,
111.8 mS/cm
Temperature
Coefficient
0 to 10%°C
Compensation
Mode
Linear or Pure
Water

4. Resistivity
Range 0 to 100 MΩ
Resolution 0.01, 0.1. 1
Accuracy ±1% F.S
TDS
Range
0 to 10 ppt(Max
00 ppt)
Accuracy ±1% F.S
TDS Factor 0.1 to 1.0
Salinity
Range
0 to 10
ppt (Maximum-80
ppt)
Accuracy ±1% F.S
Measurement
Mode
Sea
water/Practical
Salinity
DO
Concentration
Range
0 to 20.00 mg/l
Accuracy ±0.2 mg/l
Calibration Point 1 to 2 point
%Saturation of
Oxygen
0 to 200%

5. Temperature
Range 0 to 105°C
Resolution 0.1°C
Accuracy 0.5 °C
Offset Calibration 1 Point
Storage 500 Data Set
Power DC 5V power adaptor
Dimension 210x188x60 mm
Packing Dimension 310x240x180 mm
Net Weight 1.5 kg
Gross Weight 1.7 kg
Features :
1. Automatic temperature compensation with measurement mode: pH,
ORP, Ion, Conductivity, Resistivity, Salinity, TDS, DO
2. Design with large real-time clock stamp and display, support GLP, &
USB interface and can store up to 500 data sets
3. Allow auto-hold function freeze to ensure accurate reading, an
automatic electrode for zero point offset, and electrode slope display
4. Available to measure up to 15 parameters and automatic reset
features
5. This handy and dynamic unit is suitable to calibrate from 1 to 5 points
with push-button and auto-buffer recognition features (pH Mode)
6. Offer customs calibrations solution with USA, NIST, DIN standard pH
buffer solution
7. Inbuilt with an automatic electrode slope display

6. 1. Allow single point offset calibration (ORP Mode)
2. Offer adjustable display value for accurate reading
3. Come with dual measurement unit: mV & Relative mV
4. Allow 2 to 5 points calibration (with 8 calibration points) (Ion
Concentration Mode)
5. Automatic and direction concentration readout for precise
measurement
6. Available units are: ppm, mg/l, mol/l, mmol/l
7. Allow 1 or 2 points calibration under air-saturated water and no
oxygen solution (DO Mode)
8. Allow salinity & barometric pressure compensation
9. Automation calibration holding ranges from 1 to 5 points
(Salinity/Resistivity/Conductivity Mode)
10. Suitable for linear or pure water compensation
Applications :
Quality testing
Testing different factors in R&D
Accessories :
Temperature probe
Calibration solution
USB cable
DC5V Power adaptor
Electrode: pH, Conductivity, and DO

7. Labozon Scientific Inc. 100 Pearl St, Hartford, CT 06103, United States.
|
Phone:+1 860-944-7786
Email: info@labozon.com Website: www.labozon.com