2. Washing Machine
Washer makes our life so simple and comfortable by
pressing a button, goes a cycle and wash all the dirty
clothes. How cycle goes? It contains a cask into which
the clothes fixed.
Now the cask is filled with water and then rotated
quickly to remove dirt from the clothes. To remove dirt
from clothes, we can add detergents to the washing
machine.
3. Cleaning Process
Step#1:Washtub clean
The top load washer has an exclusive cycle to clean the
wash tub. We should run this cycle, on a monthly basis,
to help remove the detergents and other balance and
keep your tub clean. Cleaned unit may reduce electricity
consumption.
4. Follow this steps:
o Remove all your clothes from wash drum
o Open the dispenser.
o Add some cleaning powder such as bleach or tub
cleaner.
o Close the drawer and lid.
o Select Tube clean and press start button.
o When cycle completed, wait for the washer to cool.
Once cooled, open the lid.
o Finally, use some soft cloth to wipe around the washer
lid and door glass.
6. Step #2: Dispenser Cleaning
A Dispenser should be cleaned on occasion to remove
build-ups from the detergent. Washer’s dispenser needs
some more attention.
Get repair service experts advice before cleaning your
machine dispenser.
7. Follow this Steps:
Turn Off the washer’s Power button and unplug it
before cleaning.
Dispenser drawer to be pulled out until it stops.
Lift the front of the drawer and pull it out.
Remove inserts from the 2 compartments.
To clean the opening drawer, use a non-metal brush to
clean the abeyance.
Reassemble the drawer, reinstall it. Now you are done,
it’s good to go.
8. Step #3: Water Inlet Filter’s Clean
Water Inlet filters can get clogged, especially if you live
in an area with hard water. Cleaning the water inlet
filters is easy, and that will help the washer to run
smooth.
Professional Washer service is important to keep
everything smooth.
9. Follow this Steps:
Before Cleaning, Power of your washer’s power button.
Completely turn off both water taps.
Loosen the hot and cold water lines present in the
back of the washer.
Remove the filters. Soak them well into white vinegar.
Rinse well before reinstalling
Reattach the water lines.