In this Instructable, I make a wood slab for an old Singer sewing machine table that I renovated.
Most of the wooden beams were dismantled from old wooden pallets.
In the center of the slab are three broomstick rods, which help unit all the beams together.
You're invited to subscribe to my YouTube channel and follow all of my projects:
Make sure you don't use chemically treated wood.
made sure to pull out all the nails so there would be no problems cutting & drilling.
Top Rated Pune Call Girls Saswad ⟟ 6297143586 ⟟ Call Me For Genuine Sex Serv...
How to make pallet wood slab from recycled materia
1. instructables
How to Make Pallet Wood Slab From Recycled Materials
by Omer O
Step 1: Measuring and Marking Before Cutting
In this Instructable, I make a wood slab for an old Singer
sewing machine table that I renovated.
Most of the wooden beams were dismantled from old
wooden pallets.
In the center of the slab are three broomstick rods,
which help unit all the beams together.
follow all of my projects:
Your support is much appreciated! New projects coming
soon!
Make sure you don't use chemically treated wood.
How to Make Pallet Wood Slab From Recycled Materials: Page 1
Make 16,000 projects with step By step plans
2. Step 2: Cut to Desired Size
Step 3: Mark Three Lines
made sure to pull out all the nails so there would be no problems cutting & drilling.
I set up the planks in the order I liked, and I numbered them.
I've mark three lines across all the planks, This lines will be used to determine the position for broomsticks that will be
Going through all the planks.
How to Make Pallet Wood Slab From Recycled Materials: Page 2
Make 16,000 projects with step By step plans
3. Step 4: Marking a Location for Drilling
How to Make Pallet Wood Slab From Recycled Materials: Page 3
4. Step 5: Drilling
Step 6: Preliminary Match Test
I used a drill bit that much the broomsticks diameter.
All the beams are drilled all the way, only The outer beams were drilled halfway,
That way, the broomsticks won't be exposed, they won't be seen.
Before using glue, I checked that broomsticks easily pass through all the Wooden beams.
How to Make Pallet Wood Slab From Recycled Materials: Page 4
5. Step 7: Glue the Boards
Step 8: Milling the Wood
Eventually, the boards are glued all together.
Held with clamps for 48 hours.
I Temporarily glued the Slab to the table with a double-sided adhesive so it wouldn't move during milling.
Later on, I also added wedges.
How to Make Pallet Wood Slab From Recycled Materials: Page 5
Make 16,000 projects with step By step plans
6. Step 9: And the Other Side...
How to Make Pallet Wood Slab From Recycled Materials: Page 6
7. Step 10: Cutting Edges
Step 11: Sanding & Filling Cracks
To get a clean, straight line, I sawed the edges With a circular saw.
First, I used Rough sanding paper and sand all the surfaces, then In the cracks, I applied wood lling.
After the drying, I sand it all again with Fine Paper.
How to Make Pallet Wood Slab From Recycled Materials: Page 7
8. Step 12: Painting
I painted it all with matte varnish.
How to Make Pallet Wood Slab From Recycled Materials: Page 8
9. Step 13: Assembly
Step 14: Final Result
I attached the slab to a sewing machine table legs that I recently renovated.
Hope you enjoy the project documentation - if there are any questions or comments I'd love to hear.
Thank you :)
How to Make Pallet Wood Slab From Recycled Materials: Page 9
10. That looks fantastic!
Step 15: Tools and Materials:
Drill press, router, router sled, Circular Saw, orbital sander, clamps, paintbrush, spatula, Goggles, Gloves, Sanding paper,
Varnish, Wood glue, Wood Filling, broomsticks, Pallet wood.
How to Make Pallet Wood Slab From Recycled Materials: Page 10
Make 16,000 projects with step By step plans