PDF de instrucciones de configuracion de tab tegra

1. Black Screen Fix
Point of View 10” Tegra
Preparation notice:
- Ensure that the battery is fully charged and you have the AC adapter plugged in
-Be sure to shut down and save your in background running processes.
-Temporary disable your antivirus program before updating your tablet.
- unpack your downloaded update file.
- USB A male > USB A male cable is required

2. Point of View 10” Tegra Firmware upgrade guide
Step 1：
Connect your charger to the Tegra-Tab-10
Connect PC with Tegra-Tab-10 by USB cable.
Step 2：
You need to shut down your tablet before doing procedure.
Hold button 1 (Back key) and press and hold button 2 (power button).（p.s. Please hold button
1 when you press button 2）
Done correct you will hear the sound that there is a device connected to windows
Note: If you previously already installed the USB driver you can skip this and go to step 9

3. Point of View 10” Tegra Firmware upgrade guide
Step 3：
Check device management, you can find an “APX” device without driver.
(you can access device management by going to my computer / right mouse click / manage)

4. Point of View 10” Tegra Firmware upgrade guide
Step 4：Right click on APX and select Update Driver Software…
Step 5：Click Browse my computer for driver software.

5. Point of View 10” Tegra Firmware upgrade guide
Step 6：Select the location of driver where it is saved. (For example：D:DriverUSB)
Step 7-1：Click Install this driver software anyway.

6. Point of View 10” Tegra Firmware upgrade guide
Step 7-2：Click Close to finish driver install.
Step 8：Check device working correct in device management.

7. Point of View 10” Tegra Firmware upgrade guide
Step 9：Find the file you have downloaded. Unpack the file and double click Black Screen Fix
Step 10：Wait for a while.After the fix has been finished the window will close after 5 seconds.

8. Point of View 10” Tegra Firmware upgrade guide
Step 11: After the windows has closed you will still see the following message on the tablet.
Now hold the powerbutton to shut down the tablet.
Step 12 : Press Power button to startup your tablet. After your tablet starts up it will shut down
again (this is normal)
Now press the power button again and the tablet will boot up normally.
The first time after this fix the boot up will take a little bit longer as usual. So be patient.
Your tablet is ready for use again.