2. We have designed the ship.
We can easily be designed because the ship is
large.
Find the blog that introduces the Lego, was
chosen from there.
The ship is easy to imagine, design is simple, we
have added the arrangement.
Looking for a real photo, it was designed by an
imaginary a fine place.
Introduction
3. This prototype is ship which called Titanic.
In the real, Titanic ship is pretty huge.
Titanic was made in England at 1912, and
it was most biggest ship in that year.
Titanic's first voyage is very famous.
Titanic was Sunken in than voyage.
This happening was very shocking all over
the world. This happening killed people
about 1500.
This episode became famous by movie in
1997. It movie filmmaker is James Francis
Cameron.
1st Product Prototype Tinkercad
4. 123D Design is a 3D CAD for Autodesk, Inc., engaged in the
development and sales of CAD, including such as AutoCAD
was developed for individuals. 123D Design will be a solid
modeler. Therefore, it will be the software to continue to
create a firm shape of the 3D model from the dimensions as
machine parts.
Because the basic modeling is replete, if functional
components, it will be make most things.
"Autodesk123D" series at the time in February 2013, is
divided into five application (software).
1, Make the 3D data from the photo "123D Catch" tool.
2, fantastic character a can be designed in iPad "123D
Creature" tool.
3, Easy 3D modeling can be using the PC and the Web,
"123D Design" tool.
3, Make a model by slicing the 3D data "123D Make" tool.
5, 3D design can be in the iPad "123D Sculpt" tool.
2nd Product Prototype 123D Design
5. I was a ship designed using 123D Make.
The main function of the 123D Make is to edit the 3D model
data.
So, I took advantage of the model data that was designed in
123D Design.
123D Make it is possible to make the design specifications,
when a 3D printing.
3D print of the design specifications can be made in a
variety of ways.
For example, it can be a structure, such as piled up
cardboard cut also many pieces.
This can be made even design document that was piled up
cardboard in a more complex three-dimensional structure.
These can be adjusted, such as density and the number of
cardboard.
3rd Product Prototype 123D Make
6. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 1st Product Prototype
7. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 1st Product Prototype
8. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 1st Product Prototype
9. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 1st Product Prototype
10. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 1st Product Prototype
11. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 2st Product Prototype
12. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 2st Product Prototype
13. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 2st Product Prototype
14. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 2st Product Prototype
15. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 2st Product Prototype
16. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 3st Product Prototype
17. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 3st Product Prototype
18. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 3st Product Prototype
19. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 2st Product Prototype
20. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 3st Product Prototype
21. Develop a product specifications list
・Parts In buildwithchrome was small.
・I created a rough outline.
・It was created and is divided into
three main parts.
・They are color-coded.
22. First major step in the assembly process
we assembled base. Shape of
Bottom of ship is not flat. It is Cylinder.
we assembled one of the most
important part. It is propeller which to
move this ship.
In the real life, this part rotate and
moving ship.
23. 2nd major step in the assembly process
It was difficult it is to match the
foundation and the size.
It was devised to cover the portion of
the propeller.
I made a part where people ride. It
was hard to make a handrail.
I think it was devised to adjust the
size.
24. Third major step in the assembly process
I will cut the skeleton.
123D Make can adjust the amount of
skeleton.
I will continue to gradually increase
the amount of skeleton.
I can check the width in this step.
25. 4th major step in the assembly process
I will continue to further increase the
skeleton.
Although roughly the shape has been
formed, but chimney's balance is
unstable.
Fine model of generation has finished.
It is completed by adjusting the
details.
26. Identify three important problems
・Using the software is very difficult.
(123D design,123D Make)
・Screw design has been difficult.
Because it is an important part was
created carefully.
・It was difficult to design so as not
to disturb the overall balance.
27. Group members collaborate
s1200037 青柳裕真（Yuma Aoyagi）& s1200129 鈴木裕貴（Yuki Suzuki）
We have instructions to the team members.
We thought the design of the ship.
We have designed the ship on 3D Make.
Because of the design is the ship, it was the image of the sea this site.
Choosing the color of the ship is our job.
s1200104 齋藤祐輔（Yusuke Saito) & s1210230 荒井大和（Hirokazu Arai）
We have designed the ship on Tinkercad and 3D desin.
The most hard part is the place of the screw.
We was in as much as possible complex designs.
In order to complex design, it was designed from finely divided parts.
Therefore, I was able to make the ideal design.
28. CONCLUSION
The ship is so big.Therefore we will
need to do a huge equipment.
The following is required material.
Hard material of iron and aluminum is
required.
It will become a large-scale assemble.
Many people will need.
