Patent Office Journal Provides Latest Updates

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖ
¿ÖÖÃÖúßµÖ •Ö−ÖÔ»Ö

OFFICIAL JOURNAL
OF
THE PATENT OFFICE

×−ÖÖÔ´Ö−Ö ÃÖÓ. 22/2012 ¿ÖãÎú¾ÖÖ¸ü ×¤ü−ÖÖÓú: 01/06/2012
ISSUE NO. 22/2012 FRIDAY DATE: 01/06/2012

¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ‹ú ¯ÖÏúÖ¿Ö−Ö
PUBLICATION OF THE PATENT OFFICE

The Patent Office Journal 01/06/2012 8466

INTRODUCTION

In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.

(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

01ST June, 2012


CONTENTS

SUBJECT PAGE NUMBER

JURISDICTION 8469-8470
SPECIAL NOTICE 8471-8472

EARLY PUBLICATION (DELHI) 8473-8478

EARLY PUBLICATION (MUMBAI) 8479-8491

EARLY PUBLICATION (CHENNAI) 8492-8520

EARLY PUBLICATION (KOLKATA) 8521-8524

PUBLICATION AFTER 18 MONTHS (DELHI) 8525-8585

PUBLICATION AFTER 18 MONTHS (CHENNAI) 8586-8685

PUBLICATION AFTER 18 MONTHS (KOLKATA) 8686-8752

PUBLICATION U/R 84 (3) IN RESPECT OF APPLICATION 8753
FOR RESTORATION OF PATENT (MUMBAI)
PUBLICATION U/S 60 IN RESPECT OF APPLICATION FOR 8754-8756
RESTORATION OF PATENTS (MUMBAI)
AMENDMENT UNDER SEC.57 ( KOLKATA) 8757
PUBLICATION UNDER SECTION 43(2) IN 8758-8762
RESPECT OF THE GRANT (DELHI)
RESPECT OF THE GRANT (MUMBAI)
RESPECT OF THE GRANT (CHENNAI)
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (KOLKATA)
8772-8775

INTRODUCTION TO DESIGN PUBLICATION 8776

CORRIGENDUM 8777

COPYRIGHT PUBLICATION 8778

REGISTRATION OF DESIGNS 8779-8817


THE PATENT OFFICE
KOLKATA, 01/06/2012
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their
Territorial Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents, 4 The Patent Office,
Designs & Trade Marks, Government of India,
Boudhik Sampada Bhavan, Intellectual Property Rights Building,
Near Antop Hill Post Office,S.M.Road,Antop Hill, G.S.T. Road, Guindy,
Mumbai – 400 037 Chennai – 600 032.

Phone: (91)(22) 24123311, Phone: (91)(44) 2250 2081-84
Fax : (91)(22) 24123322 Fax : (91)(44) 2250 2066
E-mail: cgpdtm@nic.in E-mail: chennai-patent@nic.in
The States of Andhra Pradesh, Karnataka,
Kerala, Tamil Nadu and the Union
Territories of Puducherry and Lakshadweep.

2 The Patent Office,
Government of India, 5 The Patent Office (Head Office),
Boudhik Sampada Bhavan, Government of India,
Near Antop Hill Post Office,S.M.Road,Antop Hill, Boudhik Sampada Bhavan,
Mumbai – 400 037 CP-2, Sector –V, Salt Lake City,
Phone: (91)(22) 24137701 Kolkata- 700 091
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in Phone: (91)(33) 2367 1943/44/45/46/87
The States of Gujarat, Maharashtra, Madhya Fax: (91)(33) 2367 1988
Pradesh, Goa and Chhattisgarh and the Union E-Mail: kolkata-patent@nic.in
Territories of Daman and Diu & Dadra and Nagar
Haveli
Rest of India
3 The Patent Office,
Government of India,
Boudhik Sampada Bhavan,
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
The States of Haryana, Himachal Pradesh,
Jammu and Kashmir, Punjab, Rajasthan, Uttar
Pradesh, Uttaranchal, Delhi and the Union
Territory of Chandigarh.
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents
(Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the
Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents
drawn on a scheduled Bank at the place where the appropriate office is situated.


¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖê»ÖúÖŸÖÖ, ×¤ü−ÖÖÓ 01/06/2012
úÖµÖÖÔ»ÖµÖÖë êú Öê¡ÖÖ×¬ÖúÖ¸ü êú ¯ÖŸÖê
×¾Ö×³Ö®Ö •ÖÖÆüÖë ¯Ö¸ü ÛÃ£ÖŸÖ ¯Öê™êü−™ü úÖµÖÖÔ»ÖµÖ êú ¯ÖŸÖê †ÖÓ“Ö×»Öú †Ö¬ÖÖ¸ü ¯Ö¸ü ¤üÙ¿ÖŸÖ ˆ−Öúê ¯ÖÏÖ¤êü×¿Öú †×¬ÖúÖ¸ü Öê¡Ö êú ÃÖÖ£Ö
−Öß“Öê ×¤ü‹ Ö‹ Æïü :-
1 úÖµÖÖÔ»ÖµÖ: ´ÖÆüÖ×−ÖµÖÓ¡Öú, ‹úÃ¾Ö, †×³Öú»¯Ö 4 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ “Öê®Ö‡Ô,
ŸÖ£ÖÖ ¾µÖÖ¯ÖÖ¸ü ×“ÖÅ−Ö, ‡Ó™êü»ÖêŒ“Öã†»Ö ¯ÖÏÖê¯Ö™üá ¸üÖ‡™ËüÃÖ ×²ÖÜ»›üÖ
‹−Ö™üÖò¯Ö ×Æü»Ö ›üüÖú‘Ö¸ êú ÃÖ´Öß¯Öü, ‡Ó›üÛÃ™ÒüµÖ»Ö ‡Ã™êü™ü
‹ÃÖ. ‹´Ö. ¸üÖê›ü, ‹ÃÖ†Ö‡Ô›üßÃÖß†Öê †Ö¸ü‹´Ö›üß ÖÖê›üÖˆ−Ö ‹×¸üµÖÖ
‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô -400 037, ³ÖÖ¸üŸÖ. ‹›ü•ÖÃÖê−™ü ™ãü ‡ÔÖ»Ö °»ÖÖÃú
±úÖê−Ö: (91)(22) 24123311 •Öß.‹ÃÖ.™üß. ¸üÖê›ü, ÖÖµÖ−›üß,
±îúŒÃÖ: (91)(22) 24123322 “Öê®Ö‡Ô - 600 032.
‡Ô.´Öê»Ö: cgpdtm@nic.in ±úÖê−Ö: (91)(44) 2250 2081-84
±îúŒÃÖ: (91)(44) 2250-2066
‡Ô.´Öê»Ö: chennai-patent@nic.in
†Ö−¬ÖÐ ¯ÖÏ¤êü¿Ö, ú−ÖÖÔ™üú, êú¸ü»Ö, ŸÖ×´Ö»Ö−ÖÖ›ãü ŸÖ£ÖÖ
¯Öã›ãü“Öê¸üß ¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, »ÖÖ«üß¯Ö
2 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ, ³ÖÖ¸üŸÖ ÃÖ¸üúÖ¸
²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö, 5 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖê»ÖúÖŸÖÖ (¯ÖÏ¬ÖÖ−Ö úÖµÖÖÔ»ÖµÖ),
‹−Ö™üÖò¯Ö ×Æü»Ö ›üüÖú‘Ö¸ êú ÃÖ´Öß¯Öü, ²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö,
‹ÃÖ. ‹´Ö. ¸üÖê›ü, ÃÖß¯Öß-2, ÃÖêŒ™ü¸ü-V, ÃÖÖ»™ü »Öêú ×ÃÖ™üß,
‹−Ö™üÖò¯Ö ×Æü»Ö, ´Öã´²Ö‡Ô - 400 037, úÖê»ÖúÖŸÖÖ- 700 091, ³ÖÖ¸üŸÖ.
±úÖê−Ö: (91)(22) 2413 7701, ±úÖê−Ö: (91)(33) 2367 1943/44/45/46/87
±îúŒÃÖ: (91)(22) 2413 0387 ±îúŒÃÖ/Fax: (91)(33) 2367 1988
‡Ô.´Öê»Ö: mumbai-patent@nic.in ‡Ô.´Öê»Ö: kolkata-patent@nic.in
Öã•Ö¸üÖŸÖ, ´ÖÆüÖ¸üÖÂ™Òü, ´Ö¬µÖ ¯ÖÏ¤êü¿Ö, ÖÖê†Ö ŸÖ£ÖÖ ”û¢ÖßÃÖÖœÍü
¸üÖ•µÖ Öê¡Ö ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö, ¤ü´Ö−Ö ŸÖ£ÖÖ ¤üß¾Ö, ¤üÖ¤ü¸ü ³ÖÖ¸üŸÖ úÖ †¾Ö¿ÖêÂÖ Öê¡Ö
†Öî¸ü −ÖÖ¸ü Æü¾Öê»Öß.

3 ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ ×¤ü»»Öß,
²ÖÖî×¨üú ÃÖÓ¯Ö¤üÖ ³Ö¾Ö−Ö,
¯»ÖÖò™ü ÃÖÓ. 32, ÃÖêŒ™ü¸ü - 14,
«üÖ¸üúÖ, −Ö‡Ô ×¤ü»»Öß - 110 075.
±úÖê−Ö: (91)(11) 2808 1921-25
±îúŒÃÖ: (91)(11) 2808 1920, 2808 1940
‡Ô.´Öê»Ö: delhi-patent@nic.in
Æü×¸üµÖÖÖÖ, ×Æü´ÖÖ“Ö»Ö ¯ÖÏ¤êü¿Ö, •Ö´´Öæ ŸÖ£ÖÖ ú¿´Öß¸ü,
¯ÖÓ•ÖÖ²Ö, ¸üÖ•ÖÃ£ÖÖ−Ö, ˆ¢Ö¸ü ¯ÖÏ¤êü¿Ö, ×¤ü»»Öß ŸÖ£ÖÖ
ˆ¢Ö¸üÖÓ“Ö»Ö ¸üÖ•µÖ Öê¡ÖÖë, ‹¾ÖÓ ÃÖÓ‘Ö ¿ÖÖ×ÃÖŸÖ Öê¡Ö “ÖÓ›üßÖœÍü
¾Öê²ÖÃÖÖ‡™ü: http://www.ipindia.nic.in
www.patentoffice.nic.in
¯Öê™ëü™ü †×¬Ö×−ÖµÖ´Ö, 1970 ŸÖ£ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) †×¬Ö×−ÖµÖ´Ö, 2005 †£Ö¾ÖÖ ¯Öê™ëü™ü (ÃÖÓ¿ÖÖê¬Ö−Ö) ×−ÖµÖ´Ö, 2006 «üÖ¸üÖ ¾ÖÖÓ×”ûŸÖ ÃÖ³Öß †Ö¾Öê¤ü−Ö,
ÃÖæ“Ö−ÖÖ‹Ñ, ×¾Ö¾Ö¸üÖ µÖÖ †−µÖ ¤üÃŸÖÖ¾Öê•Ö µÖÖ úÖê‡Ô ¿Öã»ú ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ êú êú¾Ö»Ö ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ´Öë Ã¾ÖßéúŸÖ ÆüÖëÖê …
¿Öã»ú: ¿Öã»ú µÖÖ ŸÖÖê −Öú¤ü ºþ¯Ö ´Öë µÖÖ "Controller of Patents" êú −ÖÖ´Ö ´Öë ¤êüµÖ ²Öïú ›ÒüÖ°™ü µÖÖ “Öêú êú «üÖ¸üÖ ³Öê•Öß •ÖÖ ÃÖúŸÖß Æîü •ÖÖê ˆÃÖß Ã£ÖÖ−Ö êú ×úÃÖß
†−ÖãÃÖæ×“ÖŸÖ ²Öïú ´Öë ¯ÖÏ¤ü¢Ö ÆüÖê •ÖÆüÖÑ ˆ¯ÖµÖãŒŸÖ úÖµÖÖÔ»ÖµÖ ÛÃ£ÖŸÖ Æïü…


SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.

Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.

(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS


SPECIAL NOTICE

Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.

The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.

SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.

However, if duplication of publication of any application is found, then earlier date of publication will be taken

for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months

from the date of second publication, provided that there is there is no third party representation.


Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:

(12) PATENT APPLICATION PUBLICATION (21) Application No.1056/DEL/2011 A
(19) INDIA
(22) Date of filing of Application :11/04/2011 (43) Publication Date : 01/06/2012

(54) Title of the invention : PHARMACEUTICAL COMPOSITION COMPRISING BOSENTAN

(51) International classification :A61K (71)Name of Applicant :
(31) Priority Document No :NA 1)ALFRED E. TIEFENBACHER (GMBH & CO. KG)
(32) Priority Date :NA Address of Applicant :VAN-DER-SMISSEN-STRASSE 1,
(33) Name of priority country :NA 22767 HAMBURG GERMANY. Germany
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)CHAITANYA YOGANANDA GUJJAR
(87) International Publication No :NA 2)BALA RAMESHA CHARY RALLABANDI
(61) Patent of Addition to Application Number :NA 3)MANOHAR LAL PASAHN
Filing Date :NA 4)THOMAS RILLMANN
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a stable solid pharmaceutical composition comprising or consisting of bosentan or a pharmaceutically
acceptable salt thereof, a first diluent or filler which is a cellulose derivative and a second diluent or filler which is different from the
first diluent as well as a process for manufacturing the inventive pharmaceutical composition.

No. of Pages : 16 No. of Claims : 15


(19) INDIA

(54) Title of the invention : BOLUS ESTIMATOR FOR DIABETIC PATIENTS

(51) International classification :G01N (71)Name of Applicant :
(31) Priority Document No :NA 1)RAJAT KUMAR
(32) Priority Date :NA Address of Applicant :171/D4, BASANT LANE RAILWAY
(33) Name of priority country :NA COLONY, NEW DELHI-110055 Delhi India
Filing Date :NA 1)RAJAT KUMAR
(87) International Publication No :NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
Filing Date :NA
(57) Abstract :
A bolus estimator for diabetic patients for insulin bolus recommendation based on Anthrone reagent test for total carbohydrate
estimation. The bolus estimator consists of a reagent preparation unit for preparing Anthrone reagent, a sample preparation unit for
preparing sample of the food item, a testing unit for testing the prepared sample of the food item for total carbohydrate estimation, a
microprocessor for synchronizing all the operations and calculation of insulin bolus. Furthermore the microprocessor is coupled to a
keypad, a RAM, a ROM, a digital weighing scale, a display screen, an audible alarm and a bluetooth module for specific operations.



(19) INDIA

(54) Title of the invention : BRAKING MOVEING SYSTEM

(51) International classification :F02B (71)Name of Applicant :
(31) Priority Document No :NA 1)MANISH SHARMA
(32) Priority Date :NA Address of Applicant :MADHU GARI MATHURA ROAD,
(33) Name of priority country :NA HATHRAS, (U.P) 204101 INDIA Uttar Pradesh India
Filing Date :NA 1)MANISH SHARMA
Filing Date :NA
Filing Date :NA
(57) Abstract :
The name of this machine is Breaking Moving System. The name describes a system that can make a machine to work and can stop its
working. The system is made only for the submersible motor pump. It is connected to the submersible motor pump through the floor
of the tank. When the tank is filled with water, this system stops the function of submersible motor pump, When the water gets down
in the tank below the pipe line, from where the water flows out, The B.M.S. starts the function of submersible motor pump. In this
way, the water comes in the tank due to the motor pump. This work goes on continuously with out any interference.



(19) INDIA

(54) Title of the invention : MODIFICATION OF HYBRIDE ENGINE

(51) International classification :B60K6/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)HUKAM SINGH
(32) Priority Date :NA Address of Applicant :VILL - GAUHARI, CHHATA,
(33) Name of priority country :NA MATHURA (U.P)-281401 Uttar Pradesh India
Filing Date :NA 1)HUKAM SINGH
Filing Date :NA
Filing Date :NA
(57) Abstract :
A modification of hybrid engine is a engine in which 2 different type of power resourses is used to operate a engine. In this invention
one resourse is gaseoline and other is electric power. If gaseoline is used to operate the engine, this is called internal combustion
engine. If these fuels are used for operation, then more quantity of heat is dissipate from combustion chamber. By using this wastage
heat a electric power is generate with the help of a boiler, turbine circuit, water and electric generator, which used to operate a electric
motor. This is called a external combustion engine. In this invention the maximum quantity of heat is used, which generated burning
of fuel. Then the running cost of the engine is decreased and surrounding area of engine is take place in a normal condition.



(19) INDIA

(54) Title of the invention : A CONTINUOUS ROTARY PACKAGING MACHINE

(51) International classification :B65B (71)Name of Applicant :
(31) Priority Document No :NA 1)JAWLA ADVANCE TECHNOLOGY
(32) Priority Date :NA Address of Applicant :PARWATIYA COLONY, 30 FEET
(33) Name of priority country :NA ROAD, NEAR SARURPUR CHOWK, SOHAN ROAD,
(86) International Application No :NA FARIDABAD-121 001 HARYANA Haryana India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :NA 1)ANANG PAL
Filing Date :NA
Filing Date :NA
(57) Abstract :
This invention relates to a continuous rotary packaging machine and in particular, is used for packaging all granules, spices, washing
powder, tobacco powder like tobacco , zafrani zarda and khaini etc. More particularly, this present invention relates to a continuous
rotary packaging machine for packaging articles of uniform size. Furthermore, this invention also relates to a continuous rotary
packaging machine in which the web with the pocket containing the tablet or other article is then immediately positioned against the
other web at the nip of the laminating rolls and the two webs are caused to adhere by pressure, and heat or the application of adhesive
to one of the webs. Fig 1



(19) INDIA

(54) Title of the invention : INTRAVENOUS CATHETER APPARATUS

(51) International classification :A61M (71)Name of Applicant :
(31) Priority Document No :NA 1)POLY MEDICURE LIMITED
(32) Priority Date :NA Address of Applicant :OF PLOT NO. 105, SECTOR 59,
(33) Name of priority country :NA HSIIDC INDUSTRIAL AREA, FARIDABAD, HARYANA - 121
(86) International Application No :NA 004, INDIA, Sao Tome and Principe
(87) International Publication No :NA 1)BAID, RISHI
Filing Date :NA
Filing Date :NA
(57) Abstract :
The invention relates to an intravenous Catheter apparatus comprising a catheter hub arranged at a proximal end of a catheter tube, the
catheter hub having an inner surface defining a chamber; a needle having a needle tip at its distal end and extending through the
chamber and the catheter tube when in a ready position; and a needle guard slidably arranged on the needle and received in the
chamber when the needle is in its ready position, wherein the needle guard is configured to guard the needle tip upon withdrawal of
the needle from the catheter hub.



12) PATENT APPLICATION PUBLICATION (21) Application No.1152/MUM/2012 A
(19) INDIA

(54) Title of the invention : FLIP CAP ASSEMBLY AND METHOD OF RISTRICTING PASSAGE THROUGH A WASTE
CHUTE

(51) International classification :B60R15/04,B61D35/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)UPRETY RAJVARDHAN D
(32) Priority Date :NA Address of Applicant :76/1 ARMAMENT COLONY
(33) Name of priority country :NA GANESHKHIND BANER ROAD PUNE 411007 (MAH)INDIA
(86) International Application No :NA Maharashtra India
Filing Date :NA 2)UPRETY NAMITA
(87) International Publication No :N/A (72)Name of Inventor :
(61) Patent of Addition to Application 1)UPRETY RAJVARDHAN D
:NA
Number 2)UPRETY NAMITA
:NA
Filing Date
Filing Date :NA
(57) Abstract :
A flip cap assembly is provided for closing the outlet (12) of an inclined waste chute (11) from the bottom end on its external side.
The flip cap is a lid (21) that can be rotated, clockwise or anticlockwise, hinged on a main crankshaft bearing cum hinge (31), placed
at a fixed distance from the outlet (12) of the juxtaposed inclined waste chute (11), to form a nearly closed or.full open passage
through the outlet (12). The flip cap assembly also includes a connecting crank (32), a crank pin bearing cum sliding hinge (33), a
connecting rod (34), a wrist pin bearing cum movable hinge (35), a piston or slider cum lubricant bath (36,37), a cylindrical guide
block (44) for guiding the slider. Linear motion on the slider (36) is generated, using a screw jack mechanism (41, 43) by rotating the
lead screw (41) clockwise or anticlockwise inside the nut (43) with the help of an actuator (51) and control circuit (52).



(12) PATENT APPLICATION PUBLICATION (21) Application No.1227/MUM/2012 A
(19) INDIA

(54) Title of the invention : A METHOD AND SYSTEM FOR ENABLE DYNAMIC ACTIONS ON UNIQUE IDENTIFIERS
INCLUDING MOBILE PHONE NUMBERS AND ON ACTIVITIES.

(51) International classification :H04M1/02,G06F17/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)YOGESH CHUNILAL RATHOD
(32) Priority Date :NA Address of Applicant :1502/A MAHAVIR RESIDENCY, L B
(33) Name of priority country :NA S MARG, NEAR BALRAJESHWAR MANDIR, MULUND (W),
(86) International Application No :NA MUMBAI 400 080, MAHARASHTRA, INDIA Maharashtra
Filing Date :NA India
(61) Patent of Addition to Application 1)YOGESH CHUNILAL RATHOD
:NA
Number
:NA
Filing Date
Filing Date :NA
(57) Abstract :
A methods, systems and apparatus for enable dynamic actions on unique identifier including mobile phone number(s) and activities
are described. A method includes dynamically, manually or automatically attach, associate, provide, present and access on demand,
integrated, unified, in-mobile, inline, loosely coupled, user friendly, personalize, customized, all-in-one, unified, contextual,
interconnected, abbreviated, portable, dynamic and accessible action links with one or more unique identifier including mobile phone
number(s) and with activities for enable users and connected users of user to create multiple customized communication channels,
social networks, facilitates in participating with activities of connected users, and providing real time communication, collaboration,
interactions, dynamic actions, transactions, groupings, workflow, publishing, and sharing platform.



(19) INDIA

(54) Title of the invention : NANOSTRUCTURED LIPID CARRIER (NLC) DRUG DELIVERY SYSTEMS FOR TREATMENT
OF NEURODEGENERATIVE DISORDERS

(51) International classification :A61K9/00,A61K31/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)VIKRANT T. KADAM
(32) Priority Date :NA Address of Applicant :FLAT NO. 5, FIRST FLOOR,
(33) Name of priority country :NA WALWEKAR COMPLEX, ISLAMPUR-415 409, DIST.:
(86) International Application No :NA SANGLI, TALUK: WALWA, MAHARASHTRA STATE,
Filing Date :NA INDIA Maharashtra India
(87) International Publication No :N/A 2)DR. BASAVARAJ K. NANJWADE
(61) Patent of Addition to Application (72)Name of Inventor :
:NA
Number 1)VIKRANT T. KADAM
:NA
Filing Date 2)DR. BASAVARAJ K. NANJWADE
Filing Date :NA
(57) Abstract :
The invention relates to Nanostructured lipid carrier (NLC) drug delivery systems of antioxidant for treatment of neurodegenerative
disorders. It particularly relates to the Ubidecarenone (coenzyme Q10) loaded Nanostructured lipid carrier (NLC) drug delivery
systems for treatment of neurodegenerative disorders such as Alzheimers disease, Parkinsons disease etc. It also relates to the process
for preparation of coenzyme Q10 loaded Nanostructured lipid carrier (NLC) drug delivery systems by solvent diffusion method.The
drug delivery system comprises Glyceryl distearate and Glyceryl behenate as solid lipid and Glyceryl triacetate as liquid lipid. The
influences of different type of solid lipid and liquid lipid concentration on physiochemical properties of the NLC were characterized.
Properties of these carriers such as the particle size, drug loading, drug encapsulation efficiency, drug release, Fourier transform
infrared spectroscopy, differential scanning calorimetry behavior were investigated. As a result, the drug encapsulation efficiencies
were improved by adding the liquid lipid into the solid lipid of nanoparticles. NLC had higher encapsulation efficiency and drug
release. In addition, in vivo study showed that the antioxidant activity of the Ubidecarenone (Co.QlO NLC) was more effective than
the Ubidecarenone (Coenzyme Q10) solution form on DPPH scavenging, anti-lipid peroxidation, lowers the effect of amnesia induced
by scopolamine and increased bioavailability observed in Cmax, Tmax, and AUC. These results suggest that nanostructured lipid
formulation of Coenzyme Q10 has more antioxidant activity than that of solution form and it can be used to reduce the oxidative stress
and to increase the antioxidant enzyme activity in many neurodegenerative disorders such as Alzheimers disease, Parkinsons disease
etc.



(19) INDIA

(54) Title of the invention : MULTIPLE UNIT COUPLER

(51) International classification :B01G1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)RAJNIKANT MOHANLAL DESAI
(32) Priority Date :NA Address of Applicant :104, NEELDHARA CO-OP HSG.
(33) Name of priority country :NA SOC. LTD., SHRADHANAND ROAD, VILE PARLE (EAST),
(86) International Application No :NA MUMBAI-400 057, MAHARASHTRA, INDIA Maharashtra
Filing Date :NA India
(61) Patent of Addition to Application Number :NA 1)RAJNIKANT MOHANLAL DESAI
Filing Date :NA
Filing Date :NA
(57) Abstract :
The inter connecting coupler apparatus for locomotives including at least each of a MVS, 755BLR, 750BIP & Modular cable
termination all operatively connected such that adequate strength and longevity in varying climatic and environmental conditions of
said apparatus is ensured and said apparatus is simultaneously technically sound. [FIg-1]



(19) INDIA

(54) Title of the invention : A METHOD OF EMBOSSING ROLLERS USING LASER BEAM

(51) International classification :B23K26/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)Shilp Gravures Limited
(32) Priority Date :NA Address of Applicant :778/6 Pramukh Industrial Estate Sola
(33) Name of priority country :NA Santej Road Village Rakanpur Tal Kalol Dist Gandhinagar
(86) International Application No :NA 382721 Gujarat India Gujarat India
(87) International Publication No : NA 1)Patil Narendra Ramkrishna
(61) Patent of Addition to Application Number :NA 2)Patel Ambar Jayantilal
Filing Date :NA 3)Nair Bhaskaran Krishnan Menokil
Filing Date :NA
(57) Abstract :
The present invention discloses a method of embossing metallic roller by projecting laser beam on the surface of said roller to digitally
transfer a predetermined pattern of a fine or coarse texture design or image design on the surface of said roller to a predetermined
depth and relief accurately. The said method includes coating of etching resistant black ink on the roller surface to be embossed and
ablating the said ink in the image area by exposing the said roller surface in front of the laser beam and thereby creating said texture
design at desired depth and relief on the roller surface precisely.



(19) INDIA

(54) Title of the invention : APPARATUS AND METHOD FOR PROVIDING DUSTLESS LOADING OF GRANULAR
MATERIAL

(51) International classification :B65G69/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)Pranab Ranjan Sen
(32) Priority Date :NA Address of Applicant :EMP-59/403 Ever Shine Millenium
(33) Name of priority country :NA Paradise Thakure Village Kandivali (East) Mumbai 400101
Filing Date :NA 2)M/s. Sanghavi Engineering
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)Pranab Ranjan Sen
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention relates to an apparatus and method for providing dustless loading of the granular material into the wagon from a
silo using wear resistant pipes which is configured for loading the granular materials into the wagon. Further the present invention
provides dust collecting units which are configured for accumulating the dust particles during loading of the granular material into the
wagon and subsequently releasing the accumulated dust particles back into the wagon thus accelerating the loading process and
protect environment by considerable reduction in the dust emission.



(19) INDIA

(54) Title of the invention : NANO CARBON RECYCLED REINFORCED COMPOSITE AND A METHOD OF
MANUFACTURING THE SAME.

(51) International classification :B82B3/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)SP I-CAN NANO RESEARCH PRIVATE LIMITED
(32) Priority Date :NA Address of Applicant :702 A, HEMLATA CO-OPERATIVE
(33) Name of priority country :NA HOUSING SOCIETY, SARDAR PRATAP SINGH ROAD,
(86) International Application No :NA BHANDUP (W), MUMBAI-400 078 Maharashtra India
(87) International Publication No :N/A 1)DR. ARUP KUMAR CHATTERJEE
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a composite material and method of manufacturing the same. In particular to carbon Nano material
reinforced composite comprising of carbon Nano material, calcium Nano scaled material, resin material such as phenolic resin or
modified form thereof including epoxy modified phenolic resin, alkyd modified phenolic resin and natural fiber or any modified/
processed form thereof; wherein the carbon Nano material and calcium Nano scaled material are dispersed in the said resin material
along with the said natural fiber and / or any modified form thereof. Along with the Nano scaled calcium material, optionally, other
Nano scaled material such as Nano zinc oxide, Nano alumina, Nano silica, Nano Iron Oxide, Nano Silver, Nano copper, or Nano
Zirconium, or any combination thereof can be used as per the requirement. The composite of the present invention has strength similar
to or better than the plywood.



(19) INDIA

(54) Title of the invention : A ROBUST AUTOMATED FINGERPRINT IDENTIFICATION SYSTEM (AFIS) BASED ON
CASCADED QUALITY CHECKS AND MULTIPLE FEATURE SETS AT THREE LEVELS

(71)Name of Applicant :
(51) International classification :G06K9/00,G06K9/62 1)C-DAC - CENTRE FOR DEVELOPMENT OF
(31) Priority Document No :NA ADVANCED COMPUTING
(32) Priority Date :NA Address of Applicant :GULMOHAR CROSS ROAD NO. 9
(33) Name of priority country :NA JUHU, MUMBAI - 400 049 MAHARASHTRA (INDIA)
(87) International Publication No :N/A 1)ZIA SAQUIB
(61) Patent of Addition to Application 2)SANTOSH KUMAR SONI
:NA
Number 3)SWETA SUHASARIA
:NA
Filing Date 4)SUKHDEEP SING ARORA
(62) Divisional to Application Number :NA 5)VARUNKRISHNAN T. K.
Filing Date :NA 6)PRATIBHA MOKAL
7)ANAMIKA SINGH
(57) Abstract :
The present invention discloses a robust Automated Fingerprint Identification System (AFIS) that makes use of level III features along
with Level I (global pattern) & II (minutiae) which significantly improves the system accuracy. This substantial performance is
consistent across fingerprint images of varying qualities (good/acceptable/poor). A strict cascaded quality assessment is built into the
system for careful inspection and processing of the fingerprint images of varied qualities. The Level III features provide additional
discriminatory information, which include but not limited to sweat pores, minutiae constrained ridge contours points, edgeoscopic
features and incipient ridges. These extra features are extracted from fingerprint images captured through lOOOppi (or above)
resolution fingerprint scanners. This highly customizable and performant system is suitable for both large-scale Civil AFIS and
Criminal AFIS.



(19) INDIA

(54) Title of the invention : IMPROVED DEVICE AS JAR ATTACHMENT TO MIXER-GRINDERS.

(51) International classification :A47J43/07 (71)Name of Applicant :
(31) Priority Document No :NA 1)RAJESH OMPRAKASH MEHTA
(32) Priority Date :NA Address of Applicant :3, PEARL GLASS COMPOUND, I. B.
(33) Name of priority country :NA PATEL ROAD, GOREGAON (EAST), MUMBAI - 400063,
(86) International Application No :NA INDIA Maharashtra India
(87) International Publication No :N/A 1)RAJESH OMPRAKASH MEHTA
Filing Date :NA
Filing Date :NA
(57) Abstract :
NOT SUBMITED



(19) INDIA

(54) Title of the invention : MINUTIAE-BASED FUSION MATCHER AND FINGERPRINT AUTHENTICATION SYSTEM

(71)Name of Applicant :
1)C-DAC - CENTRE FOR DEVELOPMENT OF
(51) International classification :G06F7/00
ADVANCED COMPUTING
(31) Priority Document No :NA
Address of Applicant :GULMOHAR CROSS ROAD NO. 9
(32) Priority Date :NA
JUHU, MUMBAI - 400 049 MAHARASHTRA (INDIA)
(33) Name of priority country :NA
Maharashtra India
(86) International Application No :NA
(72)Name of Inventor :
Filing Date :NA
1)ZIA SAQUIB
(87) International Publication No :N/A
2)SANTOSH KUMAR SONI
3)SWETA SUHASARIA
Filing Date :NA
4)SUKHDEEP SINGH ARORA
5)VARUNKRISHNAN T. K.
Filing Date :NA
6)PRATIBHA MOKAL
7)ANAMIKA SINGH
(57) Abstract :
The present invention discloses a fingerprint authentication system and a novel matching method. The authentication system provided
herein is interoperable and incorporates a versatile matcher which uses either the topological relationship or spatial relationship or a
fusion of both to match the enrolled and the query templates for a robust system. Matching based on topological relationship is
achieved using the triangulation method. The matcher is invariant to large rotations, translations and non-linear distortions. In case of
a fusion matcher, the decision of topology-based matcher is further confirmed by spatial relationship based matcher (Proximity
matcher).The Proximity matcher has a provision for capturing multiple enrollment imprints of fingers, the multiple minutiae sets are
then combined to form a union-template. The union-template increases the fingerprint coverage area to effectively handle low quality
impressions. The said arrangements lead to a highly customizable and performant system for civil and criminal applications.



(19) INDIA

(54) Title of the invention : SYSTEM AND METHOD FOR PRODUCING ELECTRICAL ENERGY BY ABSORPTION OF
OCEAN WAVE ENERGY

(51) International classification :F03B13/14 (71)Name of Applicant :
(31) Priority Document No :NA 1)DEVANAND TOTARAM INGLE
(32) Priority Date :NA Address of Applicant :NEW BHIM NAGAR, DR.
(33) Name of priority country :NA AMBEDKAR CHOWK, MURTIJAPUR ROAD, AKOLA,
(86) International Application No :NA MAHARASHTRA, INDIA. Maharashtra India
(87) International Publication No :N/A 1)DEVANAND TOTARAM INGLE
Filing Date :NA
Filing Date :NA
(57) Abstract :
A system and method for producing electrical energy by absorption of wave energy are disclosed. The system includes floating
elements, one way systems coupled to the floating elements and configured to reciprocate in a vertical direction- The floating
movement of the floating elements exerts a pressure for enabling the reciprocation in vertical direction. The system further includes a
vertically elevated supporting poll for receiving an energy from the plurality one way systems fastened through a plurality of bearing
systems, a balanced wheel fastened to the vertically elevated supporting poll and configured to receive a rotational energy from the
vertically elevated supporting poll, a main gear for receiving the rotational energy transferred by the balanced wheel and a generator
with a gear system, whereby a rotation of the main gear over the gear system enables a generation of electricity.



(19) INDIA

(54) Title of the invention : METHOD&NBSP; AND APPARATUS FOR CONTROLLING A FLAME IN A KILN

(51) International classification :F23C7/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)M/s. Sanghavi Engineering
(32) Priority Date :NA Address of Applicant :Nutan Chemical Compound Walbhat
(33) Name of priority country :NA Road Goregaon (East) Mumbai 400063 Maharashtra India
Filing Date :NA 1)Krishnamoorthy Ragupathi
(87) International Publication No : NA 2)Sanghavi Sandeep
Filing Date :NA
Filing Date :NA
(57) Abstract :
The present disclosure provides an apparatus and a method for controlling flame geometry of a burner for a rotary kiln comprising at
least one first hollow member positioned axially to the burner adapted to transport fuel. At least one second hollow member
concentric to the at least one first hollow member configured to supply a draft of cold air through a first conduit. At least one third
hollow member configured to supply a main solid fuel through a second conduit. At least one fourth hollow member adapted to be
retractable in axial direction to the burner through a positioning assembly and further adapted to supply an independently controlled
air having a swirl motion about the burner axis positioned concentrically around the at least one third hollow member. At least one
fifth hollow member defining a fourth conduit adapted to supply air having an axial direction of flow to the burner.



(19) INDIA

(54) Title of the invention : ADVANCED TECHNIQUE FOR MANUFACTURING CHEMICAL FREE JAGGERY AND ALLIED
PRODUCTS.

(51) International classification :A23L1/09,C13B99/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MACHHINDRA RAMNATH CHAUDHARI
(32) Priority Date :NA Address of Applicant :MADHAV SANKALP, FLAT NO.203,
(33) Name of priority country :NA 2ND FLOOR, KEDARNATH BUILDING, COI WING, MOUJE
(86) International Application No :NA GANDHARE, KHADAKPADA, KALYAN (W) PIN CODE: 421
Filing Date :NA 301 Maharashtra India
(87) International Publication No :N/A 2)KIRAN MADHUKARRAO DESHMUKH
(61) Patent of Addition to Application 3)SANGITA RAJESH KHAMBAT
:NA
Number (72)Name of Inventor :
:NA
Filing Date 1)MACHHINDRA RAMNATH CHAUDHARI
(62) Divisional to Application Number :NA 2)KIRAN MADHUKARRAO DESHMUKH
Filing Date :NA 3)SANGITA RAJESH KHAMBAT
(57) Abstract :
The present invention Advanced technique for manufacturing chemical free jaggery and allied products consists of various
compartments, different processing units like Juice Crusher, Clarifier or Gravity Settler or Raw Juice Tank, Various Filtration
systems, Filtered juice storage tank, Concentration unit, Heating Pan, Liquid Jaggery Tank, Spray Dryer etc. Advance filtration units
such as Ultrafiltration and Nanofiltration are used for removal of impurities from the sugarcane juice in this technique. This energy
efficient, time saving, environment friendly advanced technique for natural base jaggery products produces pure jaggery products with
natural light golden yellow color without involvement of any chemical and also it requires less man power. Also it eliminates the
natural settling or centrifuge process in making Liquid Jaggery.



(12) PATENT APPLICATION PUBLICATION (21) Application No.1093/CHE/2011 A
(19) INDIA

(54) Title of the invention : EFFICIENT SCHEME FOR AUTOMATIC GAIN CONTROL IN COMMUNICATION SYSTEMS

(51) International classification :H03G (71)Name of Applicant :
(31) Priority Document No :NA 1)SAANKHYA LABS PVT. LTD
(32) Priority Date :NA Address of Applicant :402/C, 5TH CROSS, 2ND BLOCK,
(33) Name of priority country :NA HRBR LAYOUT, KALYAN NAGAR, BANGALORE 560 043
(86) International Application No :NA Karnataka India
(87) International Publication No : NA 1)S HARISH KRISHNAN
(61) Patent of Addition to Application Number :NA 2)PARAG NAIK
Filing Date :NA 3)ABDUL AZIZ
(62) Divisional to Application Number :NA 4)SUBRAHMANYA K S.
Filing Date :NA
(57) Abstract :
A system for controlling an RF gain of a receiver 500 that reduces a time taken to maintain an input signal level at an optimum
dynamic range is provided. The system includes a tuner block 502 that receives a radio frequency (RF) signal and down-converts the
RF signal to an intermediate frequency (IF) signal, and a demodulator 506. The tuner includes a radio frequency programmable gain
amplifier (RFVGA), a filter 504 and an IF programmable gain amplifier (IF_VGA). The demodulator 506 includes an analog to digital
converter (ADC) 510, and an Automatic Gain Control (AGC) unit 512 that (i) receives a digital signal and an IF gain of the IFVGA.
The ADC 510 samples the digital signal under oversampling conditions to obtain an oversampled signal that includes an in-band
signal and an out-of-band signal. The AGC unit 512 (ii) controls the RFVGA, the IFVGA and (iii) measures an RF energy of the RF
signal. FIG.5



(19) INDIA

(54) Title of the invention : SCHEMES FOR DETECTING THE GUARD INTERVAL LENGTHS IN OFDM SYSTEMS

(51) International classification :H04L (71)Name of Applicant :
(87) International Publication No : NA 1)S HARISH KRISHNAN
(61) Patent of Addition to Application Number :NA 2)SHRINIVAS BHAT
Filing Date :NA
Filing Date :NA
(57) Abstract :
A method of detecting a guard interval estimate accurately by performing an Nth order polynomial based non-linear quantization on a
pre-estimated guard interval in a received Orthogonal Frequency Division Multiplexing (OFDM) signal in a receiver is provided. The
pre-estimated guard interval is obtained by performing normalized auto-correlation on the received OFDM signal. The method
includes (i) performing a rounding operation on (a) one or more mth coefficient of the polynomial and (b) the pre-estimated guard
interval to obtain an indexing parameter k, and detecting the guard interval estimate based on (i) a value of k, and (ii) a guard interval
from one or more guard intervals that are stored in a look up table. The guard interval estimate is detected in accordance with an
equation: L = L[k - 4], where L is the guard interval stored in the look up table that corresponds to the value of k. FIG.1



(19) INDIA

(54) Title of the invention : REDUCED COMPLEXITY CARRIER FREQUENCY OFFSET ESTIMATION AND SYMBOL
TIMING RECOVER FOR SPECTRALLY SHAPED WIRELESS AND WIRELINE STANDARDS CONSIDERING SPECTRUM
TILT IMPAIRMENTS

(87) International Publication No : NA 1)SAURABH MISHRA
(61) Patent of Addition to Application Number :NA 2)PARAG NAIK
Filing Date :NA 3)SUBRAHMANYA K S
(62) Divisional to Application Number :NA 4)S HARISH KRISHNAN
Filing Date :NA 5)GURURAJ PADKI
(57) Abstract :
A system for reducing implementation complexity for estimation of a Carrier Frequency Offset (CFO) and a Symbol Timing Offset
(STO) for an input signal for spectrally shaped multiple communication standards is provided. The system is implemented by
replacing multiplier with shifters. The system includes a CFO estimation block, a STO estimation block, and a band extraction block
that extracts a lower band edge and an upper band edge of the input signal. The STO estimation block includes a sample error
generation block that computes a sampling timing error value, and a Phase Lock Loop block that estimates a frequency error and a
phase error corresponding to the sampling timing error value. The CFO estimation block estimates the CFO based on (i) a spectrum
tilt correction factor obtained from a tilt information and (ii) a corresponding shift value.



(19) INDIA

(54) Title of the invention : HANDLE WITH LOCKING MECHANISM

:G06F, (71)Name of Applicant :
(51) International classification
E05B 1)TEJAS NETWORKS LTD
(31) Priority Document No :NA Address of Applicant :2ND FLOOR, GNR TECH PARK,
(32) Priority Date :NA 46/4, GARVEBHAVI PALYA, KUDLU GATE, HOSUR MAIN
(33) Name of priority country :NA ROAD, BANGALORE - 560 068 Karnataka India
Filing Date :NA 1)CHETHAN. P
(87) International Publication No : NA
Filing Date :NA
Filing Date :NA
(57) Abstract :
The various embodiments of the present invention provide a locking mechanism for locking any field replaceable unit (FRU) in a
cabinet. The locking mechanism comprises a handle pivotally connected to the FRU and at least one lock element provided on bottom
of the handle. The latch hook of the handle aligns with a corresponding latch grove provided in the cabinet for fixing the FRU into the
cabinet and preventing movement of the FRU in the cabinet. The locking mechanism further comprising a securing provided on the
handle and fastened to a threaded hole provided on the FRU for preventing the opening of the handle.



(19) INDIA

(54) Title of the invention : MODULE SHELF

:G06F, (71)Name of Applicant :
E05B 1)TEJAS NETWORKS LTD
(31) Priority Document No :NA Address of Applicant :2ND FLOOR, GNR TECH PARK,
(32) Priority Date :NA 46/4, GARVEBHAVI PALYA, KUDLU GATE, HOSUR MAIN
(33) Name of priority country :NA ROAD, BANGALORE - 560 068 Karnataka India
Filing Date :NA 1)VYSHAKH PAVITHRAN
(87) International Publication No : NA 2)PRASANTH PAVITHRAN
Filing Date :NA
Filing Date :NA
(57) Abstract :
The various embodiments of the present invention provide a locking mechanism for locking any field replaceable unit (FRU) in a
cabinet. The locking mechanism comprises a handle pivotally connected to the FRU and at least one lock element provided on bottom
of the handle. The latch hook of the handle aligns with a corresponding latch grove provided in the cabinet for fixing the FRU into the
cabinet and preventing movement of the FRU in the cabinet. The locking mechanism further comprising a securing provided on the
handle and fastened to a threaded hole provided on the FRU for preventing the opening of the handle.



(19) INDIA

(54) Title of the invention : TWIN-SIDED FLUSH FASTENER

(51) International classification :F16B (71)Name of Applicant :
(31) Priority Document No :NA 1)TEJAS NETWORKS LTD
(32) Priority Date :NA Address of Applicant :2ND FLOOR, GNR TECH PARK,
(33) Name of priority country :NA 46/4, GARVEBHAVI PALYA, KUDLU GATE HOSUR MAIN
(86) International Application No :NA ROAD, BANGALORE - 560 068 Karnataka India
(87) International Publication No : NA 1)VYSHAKH PAVITHRAN
Filing Date :NA
Filing Date :NA
(57) Abstract :
The various embodiments of the present invention provide a flush fastener and a method of fastening a plurality of surfaces having
pre-drilled holes using the flush faster. The flush fastener comprising an elongated shank portion and a shank head provided on at least
one end of the shank portion. The flush fastener is provided with a dimension to secure a plurality of surfaces having pre-drilled holes
of a less dimension by creating a mechanical interlock between the plurality of surfaces. The method of fastening comprises inserting
a flush fastener into the predrilled holes on the plurality of surfaces, verifying a required protrusion of the flush fastener from an
opposite end of the insertion and flattening a protruded part of the flush fastener by a punching means such that the flattening fills the
gap of the aperture and permanently joins the plurality of surfaces together.



(19) INDIA

(54) Title of the invention : VECTOR SLOT PROCESSOR EXECUTION UNIT FOR HIGH SPEED STREAMING INPUTS

:H04L, (71)Name of Applicant :
G06F 1)SAANKHYA LABS PVT. LTD.
(31) Priority Document No :NA Address of Applicant :402/C, 5TH CROSS, 2ND BLOCK,
(32) Priority Date :NA HRBR LAYOUT, KALYAN NAGAR, BANGALORE-560 043
(33) Name of priority country :NA Karnataka India
Filing Date :NA 1)ANINDYA SAHA
(87) International Publication No : NA 2)GURURAJ PADAKI
(61) Patent of Addition to Application Number :NA 3)SANTOSH BILLAVA
Filing Date :NA 4)RAKESH A JOSHI
Filing Date :NA
(57) Abstract :
A vector slot processor that is capable of supporting multiple signal processing operations for multiple demodulation standards is
provided. The vector slot processor includes a plurality of micro execution slot (MES) that performs the multiple signal processing
operations on the high speed streaming inputs. Each of the MES includes one or more n-way signal registers that receive the high
speed streaming inputs, one or more n-way coefficient registers that store filter coefficients for the multiple signal processing, and one
or more n-way Multiply and Accumulate (MAC) units that receive the high speed streaming inputs from the one or more n-way signal
registers and filter coefficients from one or more n-way coefficient registers. The one or more n-way MAC units perform a vertical
MAC operation and a horizontal multiply and add operation on the high speed streaming inputs.



(19) INDIA

(54) Title of the invention : ZERO OVERHEAD BLOCK FLOATING POINT IMPLEMENTATION IN CPU'S

(51) International classification :G06F (71)Name of Applicant :
(31) Priority Document No :NA 1)SAANKHYA LABS PVT. LTD.
(33) Name of priority country :NA HRBR LAYOUT, KALYAN NAGAR, BANGALORE-560 043
(87) International Publication No : NA 1)GURURAJ PADAKI
(61) Patent of Addition to Application Number :NA 2)ANINDYA SAHA
Filing Date :NA 3)PARAG NAIK
(62) Divisional to Application Number :NA 4)SUNIL HR
Filing Date :NA 5)VISHWAKUMARA KAYARGADDE
(57) Abstract :
A system for computing a block float point scaling factor by detecting a dynamic range of an input signal in a central processing unit
without additional overhead cycles is provided. The system includes a dynamic range monitoring unit that detects the dynamic range
of the input signal by snooping outgoing write data and incoming memory read data of the input signal. The dynamic range
monitoring unit includes a running maximum count unit that stores a least value of a count of leading zeros and leading ones, and a
running minimum count that stores a least value of the count of trailing zeros. The dynamic range is detected based on the least value
of the count of leading zeros and leading ones and the count of trailing zeros. The ) system further includes a scaling factor
computation module that computes the block floating point (BFP) scaling factor based on the dynamic range.



(19) INDIA

(54) Title of the invention : DIGITAL FILTER IMPLEMENTATION EXPLOITING STATISTICAL PROPERTIES OF SIGNAL
AND CO-EFFICIENTS

(31) Priority Document No :NA 1)SAANKHYA LABS PVT. LTD.
(33) Name of priority country :NA HRBR LAYOUT, KALYAN NAGAR, BANGALORE-560 043
(87) International Publication No : NA 1)PARAG NAIK
(61) Patent of Addition to Application Number :NA 2)ANINDYA SAHA
Filing Date :NA 3)GURURAJ PADAKI
(62) Divisional to Application Number :NA 4)SUBRAHMANYA K S
Filing Date :NA 5)SAURABH MISHRA
(57) Abstract :
A method for implementing a digital filter in a processor that includes at least one of (i) a load store unit, (ii) a Multiply and
Accumulate (MAC) unit and (iii) an arithmetic unit is provided. The method includes (a) determining a bit-width of an incoming data
sample of an incoming signal by measuring a distance between a leading zero or one and a trailing zero of the incoming data sample.
The incoming data sample is obtained by sampling the incoming signal at a pre-defined time interval, (b) obtaining one or more bit-
width multipliers with variable bit-widths based on a first probability distribution function (PDF) of one or more bit-widths of
incoming data samples, and (c) allocating the incoming data sample and a filter coefficient based on a bit-width of the incoming data
sample and a bit-width of the filter coefficient to a bit-width multiplier from the one or more bit-width multipliers.



(19) INDIA

(54) Title of the invention : A METHOD FOR MONITORING A FIRE PROTECTION SYSTEM AND A SYSTEM THEREOF

(51) International classification :A62C (71)Name of Applicant :
(31) Priority Document No :NA 1)PRASAD PARASURAMAN
(32) Priority Date :NA Address of Applicant :2C-720 I Block HRBR Layout
(33) Name of priority country :NA Bangalore Karnataka India Karnataka India
Filing Date :NA 1)Prasad Parasuraman
(87) International Publication No : NA
Filing Date :NA
Filing Date :NA
(57) Abstract :
The invention provides a method for monitoring a fire protection system. The method includes initiating a time interval for
monitoring simulating a fire like condition to trigger pumping of jockey pump primary pump and other pumps required for full
functioning of the fire protection system tracking the performance of the pumps during the monitoring cycle recording logs of the
monitoring remotely communicating the logs and analysis to an authorized user for performing maintenance of the fire protection
system. The invention provides a system for monitoring a fire protection system.



(19) INDIA

(54) Title of the invention : PC ERGO

(51) International classification :G09B (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. ASHOK VERGHESE
(32) Priority Date :NA Address of Applicant :MR. ASHOK VERGHESE
(33) Name of priority country :NA DIRECTOR HINDUSTAN UNIVERSITY, POST BOX NO:1,
(86) International Application No :NA RAJIV GANDHI SALAI (OMR), PADUR, (VIA)
Filing Date :NA KELAMBAKKAM CHENNAI - 603 103 Tamil Nadu India
(87) International Publication No : NA 2)MR. D. JOHN ARAVINDHAR
(61) Patent of Addition to Application Number :NA (72)Name of Inventor :
Filing Date :NA 1)MR. ASHOK VERGHESE
(62) Divisional to Application Number :NA 2)MR. D. JOHN ARAVINDHAR
Filing Date :NA
(57) Abstract :
The PC ERGO, as the name indicates, intends to provide knowledge at optimal comfort level and it is on its way to revolutionize the
idea of smart classrooms by giving it a new inexpensive, portable, user-friendly, and integrated vista. The ERGO is uniquely designed
and packed in with features like HD video conferencing, integrated projector to provide clear, interesting and effective teaching, Wi-Fi
connectivity for high speed and tangle-free connectivity, Ethernet ports and USB ports at easy-to-access positions, audio and wireless
mike uphold, inbuilt power back up facility and portable and movement arrestor features. The revealing component drawer facilitates
easy upkeep, quick replacement of defective parts, and gives an idea about the internal organs of a common personal computer to
those who are not familiar with computers. This unique product provides down-to-earth ambiance for the acquisition of knowledge
with the outlay-effective, fully equipped, glossy furnishing to assist the preceptor as well as the learner. Furthermore it addresses most
crucial factors like comfort level and capacity. Fig.1



(19) INDIA

(54) Title of the invention : THE ART, METHOD AND MANNER OF FABRICATING HIGHLY POROUS THIN FILM NIO
ELECTRODE FOR SUPERCAPACITORS

(31) Priority Document No :NA 1)AMRITA VISWAVIDYAPEETHAM UNIVERSITY
(32) Priority Date :NA Address of Applicant :ELAMAKKARA P.O., COCHIN - 682
(33) Name of priority country :NA 041 Kerala India
Filing Date :NA 1)DR. AVINASH BALAKRISHNAN
(87) International Publication No : NA 2)DR. SHANTIKUMAR V. NAIR
(61) Patent of Addition to Application Number :NA 3)DR. K.R.V. SUBRAMANIAN
Filing Date :NA 4)DR. SIVAKUMAR N
(62) Divisional to Application Number :NA 5)RANJUSHA R
Filing Date :NA 6)ANJALI P
(57) Abstract :
The present invention relates to method of fabricating a thin film electrode suercapacitor using electrophoretic deposition of NiO
nanostructured materials. This invention is directed to the application of high performance supercapacitors or battery electrodes.



(19) INDIA

(54) Title of the invention : THE ART, METHOD, MANNER, PROCESS AND SYSTEM OF FABRICATING HIGH ASPECT
RATIO, UNIFORM SIZED MNO2 NANO-FIBERS

(51) International classification :B82Y (71)Name of Applicant :
(57) Abstract :
The present invention relates to method of fabricating uniform diameter size, high aspect ratio MnO2 nanofibers using hydrothermal
method. This invention is directed to applications like electrochemical storage devices, magnetic applications, catalyst, colorant and
decolorizer in glass, white ware, enamels and pottery, etc.



(19) INDIA

(54) Title of the invention : PORTABLE LIGHT TABLE

(51) International classification :G09B (71)Name of Applicant :
(31) Priority Document No :NA 1)G. GIRISH
(32) Priority Date :NA Address of Applicant :NO.1/4, 62ND STREET, NEAR
(33) Name of priority country :NA LITTLE FLOWER SCHOOL, ASHOK NAGAR, CHENNAI -
(86) International Application No :NA 600 083 Tamil Nadu India
(87) International Publication No : NA 1)G. GIRISH
Filing Date :NA
Filing Date :NA
(57) Abstract :
Portable Light Table is an important and essential gadget for Graphic artists, illustrators, Animation Professionals, Drafters as well as
for students for tracing patterns and designs. It has a very wide application in the development animation drawings. It is also an
inevitable accessory for an art student to trace intricate pictures with finer details. The portable light table is a surface lit gadget which
provides sufficient illumination to reproduce 2D pictures with all its minute details. This Portable Light Table according to present
invention comprises of, an elastomer sheet of suitable dimension A4 / A3 with a frosted face, LED illuminating light source and a rear
mirror/polished reflective surface. The elastomer sheet is placed over the reflective surface, so that frosted face and the reflective face
are facing each other. The LED strips are wrapped around the assembly all along the thickness. The key feature of this portable light
table is that uneven surface of the elastomer sheet makes the path of the light visible evenly throughout the top surface, and reflective
back plate helps in throwing additional light out through the elastomer.



(19) INDIA

(54) Title of the invention : THE ART, METHOD, MANNER, PROCESS AND SYSTEM OF FABRICATING UNIFORM SIZED
NIO NANOFIBERS

:B82Y, (71)Name of Applicant :
H01G 1)AMRITA VISWAVIDYAPEETHAM UNIVERSITY
(31) Priority Document No :NA Address of Applicant :ELAMAKKARA P.O., COCHIN - 682
(32) Priority Date :NA 041 Kerala India
(33) Name of priority country :NA (72)Name of Inventor :
(86) International Application No :NA 1)DR. AVINASH BALAKRISHNAN
Filing Date :NA 2)DR. SHANTIKUMAR V. NAIR
(87) International Publication No : NA 3)DR. K.R.V. SUBRAMANIAN
(61) Patent of Addition to Application Number :NA 4)DR. SIVAKUMAR N
Filing Date :NA 5)RANJUSHA R
(62) Divisional to Application Number :NA 6)ANJALI P
Filing Date :NA
(57) Abstract :
The present invention relates to methods of fabricating NiO nanofibers using hydrothermal method. This invention is directed to
applications related to electrical ceramics like thermistors and varistors, pigments, optoelectronic devices, electrochemical storage
devices such as high performance supercapacitor, batteries, etc., and also to biological applications involving assays and separations of
biologies, tissue engineering etc..



(19) INDIA

(54) Title of the invention : THE ART, METHOD AND MANNER OF FABRICATING HIGHLY POROUS THIN FILM MNO2
ELECTRODE FOR SUPERCAPACITOR OR BATTERY APPLICATIONS

(57) Abstract :
The present invention relates to method of fabricating a thin film electrode using electrophoretic deposition of Mn02 nanofibers for
supercapacitor or battery applications with high specific capacitance and stability.



Patent Office Journal Provides Latest Updates

Patent Office Journal Provides Latest Updates

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (11)

Similar to Patent Office Journal Provides Latest Updates

Similar to Patent Office Journal Provides Latest Updates (18)

More from InvnTree IP Services Pvt. Ltd.

More from InvnTree IP Services Pvt. Ltd. (20)

Recently uploaded

Recently uploaded (20)

Patent Office Journal Provides Latest Updates