Discuss the importance of security and what elements need to be addr.pdf

•

0 likes•2 views

Discuss the importance of security and what elements need to be addressed with concern to security. Solution Importance of security and elements needed to be addressed: 1. To improve efficiency of the system 2. To improve integrity of the product or information. 3. Information gets protected. There is no threat to your system from any third party. Elements: 1. Confidentiality 2. Possession 3. Integrity 4. Authenticity 5. Availability 6. Utility.

Education

More from infomalad

How innovative offerings gain acceptance within market segments How innovative offerings gain acceptance within market segments Solution In the face of cut-throat competition in today’s world, producers are expected to stay ahead if each other but offering something new to the customers. This requires constant innovation offerings that make way into the market through two ways: Diffusion and Adoption. The innovation in a product or service can be very small, or very large so as to change the structure of the whole product or service. After the innovation has been done, two factors play an important role: (i) Diffusion: This deals with the question of whether at all the innovated offering (product/service) would be accepted by the market segment (ii) Adoption: If the answer to ‘diffusion’ is ‘yes’ then this deals with how fast the innovative product or service offering would be accepted into the market segment. Diffusion is seen from a macro point of view wherein focus is put on creating awareness about the new product/service offering so that it gets accepted in the market segment. It is the process by which an innovative offering either is absorbed into the market or is not accepted in the market segment. This process is carried out mainly through communication by mass media, sales persons, word-of-mouth advertisement, etc. There is a target market that needs to be addressed within a specific period of time. Typically there are 4 elements of diffusion: Adoption on the other hand is seen from a micro point of view wherein stress is put on the various stages that a potential consumer goes through while accepting or rejecting the innovative offering, after is has been introduced in the market segment. Sometimes it may so happen that an innovative offering was there in the market but the consumer was unaware of it. This is where advertisement and selling strategies play extremely important roles. There are 5 factors that influence adoption: Thus, the above two processes are the ways through which innovative offerings gain acceptance within market segments..

How innovative offerings gain acceptance within market segmentsH.pdf

infomalad

How does an organization socialize an individual? How ATM(automated teller machine) has changed since its introduction into marketplace. ? Solution Answer:- Socialization can be described as the process through which employees become acclimated to the culture or the norms of the organization. An organization can socialize an individual through informal interactions with the management of the organization, where they can be able to learn the norms and the culture of an organization. Secondly, it can be achievable through peer interactions, where they can be accustomed to the way of doing things in the workplace. Thirdly. this is achievable through giving individuals a sense of membership, where they will feel more valued and able to interact freely with other people. Socializing an individual can also be achievable through involving them in the decision making processes. Over the years, the ATM has evolved through innovation and technology. Firstly, it has changed with regards to its usability. For instance, in the 1980\'s, there was the introduction of the FDK buttons, as well as the color displays. Secondly, intelligent deposit ATM\'s have been introduced to ensure more effectiveness and efficiency(Yang & Ching, 2010). Through the 1990\'s, functionality has also been enhanced. This is in terms of audio input, thermal receipt printers, as well as signature capture of the customers becoming more useful.More recently, the ATM cards have been linked to the mobile phones of the customers, where customers can receive a code through their phone when withdrawing cash from their banks using ATM cards..

How does an organization socialize an individualHow ATM(automated.pdf

infomalad

Homework: Develop a strategylies) to get a house. Consider possible hypothetic conditions and situations that can be present in the development of the strategy. Make your suppositions of what is feasible and reasonable. MISSION AND VISION OBJECTIVE(S) STRENGTHS 2. 4 Key Success Factor (KSF) 1. 2. WEAKNESSES 2. 3. 4. OPPORTUNITIES 2. 4 S. O. STRATEGIES W.O. STRATEGIES THREATS 2. 4 S. T. STRATEGIES W. T. STRATEGIES Solution It has been mentioned in the question that the strategy is to buy a house and one has to list down the ‘strengths’, ‘weaknesses’, ‘opportunities’ and ‘threats’ in relation to buying a house which implies that a SWOT analysis needs to be done in order to come to the best conclusion. This SWOT analysis is a planning technique strategy which helps to indentify the internal strengths and weaknesses that one might get by buying a house. This helps in judging whether at all the investment is worthy or not. Additionally, there are external opportunities and threats from getting a house, being aware of which will allow the investor to maximize the returns out of the particular investment. Let the investor (may be an individual or a accompany) plan to get a house in area X. The SWOTs can be identified and arranged in a table as follows: Mission and Vision: To invest in a property at competitive prices, that guarantees customer satisfaction with contemporary living styles, in the best housing environment. Key Success Factors: (KSF) Objectives: To buy a house in area X, of a particular size and structure (E.g. 4000 sq. Ft. Duplex villa), in a posh residential complex built the best builders in the market. However, the price would be competitive. Strengths: 1. Area X is developing fast both in terms of residential and business real estate and is projected to be the most sought after area of residence in the city. 2. Investment in area X has gone up tremendously 3. The location of the property is a huge strength, as it is well connected to other parts of the city. Hospitals, shopping complexes, etc are all a stone’s throw away. 4. If the investor were to resale the property at some point, it would be hugely profitable, guaranteeing the highest price of housing in the city in the next few years. Weaknesses: 1. There is a lot of political interference and turmoil in the targeted area of housing. 2. The area is still under development and lacks security for immediate living as the area has reported thefts and burglaries frequently. 3. The roads are in a horrible condition as construction in that area is in full swing. There are a host of residential and commercial properties which are being built there at the same time, which makes staying there immediately a hassle. 4. As of now, there is no police station or hospital nearby. Most of the hospitals, recreation facilities, security facilities etc are ‘projected’ to be completed soon. Therefore, ready-to-move housing will not provide the facilities of a quick doctor on call, or police protect.

Homework Develop a strategylies) to get a house. Consider possible h.pdf

infomalad

Given a definition of a group Given a definition of a group.pdf

infomalad

Given the indexed collection of denumerable sets A_i with i N, prov.pdf

infomalad

give an example of a successful progect thats ben done by a virtual team(means the members lives away from each other and contact through the internet) reference Solution An example of successful virtual teams has been the implementation of virtual teams in Intel for promoting team collaboration. This has resulted in enhanced productivity, better communication and greater collaboration among teams responsible for designing microprocessors in the Intel company. Source: Intel’s Secrets to Virtual Team Success. A lesson in online collaboration from the best. SIMON J. WILLIAMS MAY 16TH, 2014 (www. Redbooth.com).

give an example of a successful progect thats ben done by a virtual .pdf

infomalad

File name: a2.cpp Task For this assignment, you are required to either A) modify your linked list code to implement a queue or B) modify the provided stack code to implement a queue. Your program should implement a C++ queue class with the following member functions: - Void enq(int) - Void deq() - Void front() - Bool isEmpty() - Void printq() Your program will take in a command file called “cmd.txt” which will instruct your program what operations to run File Format <0 or 1 arguments> Commands - 1 enq - 2 deq - 3 front - 4 isEmpty - 5 printq Example File 1 1 5 1 2 5 1 3 5 1 4 5 3 2 5 2 5 3 Expectations You should not use any already pre implemented code for your queue such as a standard library object Your code should be well formatted with proper spacing and proper naming Your code should have well named variables. No a’s b’s or c’s as names unless it is for something like a loop counter Your code should have the same output formatting you see below Your code MUST follow the formatting you see below Your file MUST be named a2.cpp My example file does not contain all possible test cases it is up to you to determine any other special cases to test your program against. Example Output //LinkedList class #include #include #include #include #include using namespace std; struct Node { int data; Node *next; }; class LinkedList { private: Node *head; Node *tail; public: LinkedList(); //constructor void prepend(int num); void append(int num); void removeFront(); void removeBack(); void remove(int num); int search(int num); void printList(); }; //constructor LinkedList::LinkedList() { head=NULL; tail=NULL; } //prepend() method void LinkedList::prepend(int num) { //allocate space for new node Node *node=new Node; //populate node node->data=num; node->next= NULL; //attach new node to start of list //if linked list empty if(head==NULL) { head=node; tail=node; } else //linked list not empty { node->next=head; head=node; } } //append() method void LinkedList::append(int num) { //allocate space for new node Node *node=new Node; //populate node node->data=num; node->next= NULL; //attach new node to end of list //if linked list empty if(head==NULL) { head=node; tail=node; } else //linked list not empty { tail->next=node; tail=node; } } //removeFront() method void LinkedList::removeFront() { //if linked list empty, then underflow if(head==NULL) { cerr<<\"Underflow\"<next; //delete node cout<<\"Removing \"<data<<\" from the list\"<next!=NULL) { /*if(curr==tail) break;*/ prev=curr; curr=curr->next; } prev->next=NULL; tail=prev; //delete node cout<<\"Removing \"<data<<\" from the list\"<data=num) break; prev=curr; curr=curr->next; } //preserve node Node *temp=curr; //detach node from linked list prev->next=curr->next; //delete node cout<<\"Removing \"<data<<\" from the list\"<data=num) { found=1; //num found break; } curr=curr->next; } return found; } //printList() method void LinkedList::printList() { //traverse linked list Node *curr=head; while(curr!=NULL) { c.

File name a2.cppTaskFor this assignment, you are required to ei.pdf

infomalad

Explain in detail the DTE-DCE Transmission? Solution Data communications equipment (DCE) refers to computer hardware devices used to establish, maintain and terminate communication network sessions between a data source and its destination. DCE is connected to the data terminal equipment (DTE) and data transmission circuit (DTC) to convert transmission signals. Data Communications Equipment (DCE) A modem is a typical example of data communications equipment. In general, data communications equipment is used to perform signal exchange, coding and line clocking tasks as a part of intermediate equipment or DTE. Some additional interfacing electronic equipment may also be needed to pair the DTE with a transmission channel or to connect a circuit to the DTE. DCE and DTE are often confused with each other, but these are two different device types that are interlinked with an RS-232 serial line. DTE and DCE connectors are wired differently if a single straight cable is employed. DCE generates internal clock signals, while DTE works with externally provided signals. Without employing a modem, the DCE and DTE can be connected through a crossable cable medium like a null modem for Ethernet or typical RS-232 serial line. Many modems are DCE, while the computer terminal is DTE. The DCE converts the signal to a format appropriate to the transmission medium and introduces it onto the network link. A DCE takes data generated by a DTE, converts them to an appropriate signal, and then introduces the signal onto the communication link. | Commonly used DCEs include modems. To make communication possible, both the sending and receiving DCEs must use the same modulating method (e.g.FSK). Data Terminal Equipment (DTE) DTE includes any unit that functions either as a source of or as a destination for binary digital data. It can be a terminal, computer, printer, fax machine .. Or any other device that generates or consumes digital data. DTE do not often communicate directly with another one; they generate and consume information but need an intermediary to be able to communicate. Analogy: our brain does when we talk. Brains –DTE, mouth/ear – DCE, air/telephone line –transmission medium. In computer data transmission, DTE (Data Terminal Equipment) is the RS-232C interface that a computer uses to exchange data with a modem or other serial device. Data Terminal Equipment is equipment which acts as source or destinations in digital communication and which is capable of converting information to signals and also reconverting received signals. Pieces of data terminal equipment usually do not communicate between each other, which is usually done by data communications equipment. Common examples of data terminal equipment: printers, routers, application servers etc. Features of Data Terminal Equipment: DTE-DCE INTERFACE Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) . There 4 basic functional units involved in the communication data: DTE and DCE .

Explain in detail the DTE-DCE TransmissionSolutionData commun.pdf

infomalad

Find an example of a real project with a real project manager. The project can be from corporate, business, construction etc. Interview the project manager or one of the project leads. Write a two-page paper describing the project in terms of its scope, time and cost goals. Discuss what went right and wrong on the project. Also, discuss the role of the project manager and project sponsor. You will also discuss if the project was successful or unsuccessful. Search the internet for two interesting articles about software development life cycles or project management life cycle, including agile software development. Also, review the website ww w.aailealliance.ong. What do these sources say about project management? Summarize your findings in a one to two-page paper citing any references. Solution For this assignment, would like to discuss 1 project in details. This project we are going to discuss is from a corporate. Whenever the new partners in a particular geographical region signed up, the welcome kit was to be shipped. Partners signed up with the the multinational and the relevant details were passed to this third organization for preparing and shipping out the relevant welcome kits in that region. Multinational M <---------------->Regional Partners P M-------Backend Processing at Regional Company R----------------P The regional company R performed the backend fulfillment at a regional level to prepare & send out the welcome kit - some Software CDs for development, manuals, etc. Let us call this Organization R where the project was done. Scope: Scope of the project involved reading weekly files from M and creating new orders in the ERP system of R. Time: Time of the project implementation was 2 months. Cost: Cost of the project was 50K USD As the project was for a prestigious organization, it was important for regional company R, however its budget was low and it involved multiple stakeholders that played important role in the success/failure of the project. Time: Out of the 2 months, the user requirement and testing needed more time in this case, as this project could mean different things to the various stakeholders. As a project manager it was important to meet up with customer R and also to connect with customer\'s customer. Multinational M had certain assumptions about the project that were missed initially. There was a limited time to successfully launch the project. It helped getting approvals for the requirements in detail which involved data formats, expected delivery schedules, etc. The testing was key in this project as the input files were received from outside company R. The security protocols for file transfers need to be defined and tested. So there was administration team that had a role in this project. Even though there job was for half a day only, certain approvals were needed from the highest level and for the success of the project it was needed to initiate it well in advance. The 2 weeks were needed for requirements gat.

Find an example of a real project with a real project manager. The pr.pdf

infomalad

Define financial engineering in terms of how to change the risk-return characteristics of an existing position by using derivative instruments. Solution Effectively managing finance and operations risk is increasingly complex. Today’s leaders are not only tasked with establishing sustainable infrastructures to manage the ever-changing regulatory and business environment, but they are also challenged to drive performance and results year over year. To meet these challenges, leaders need solutions to address a variety of financial and operational risks that result from external and internal changes, including regulatory changes, market volatility, corporate events, and growing third-party relationships. Are you driving performance by optimizing the management of your risks.

Define financial engineering in terms of how to change the risk-retu.pdf

infomalad

As a result of total quality management, organizational changes in the way teams function has been a direct impact from TQM. Teamwork removes barriers among individuals, departments, and functions resulting in more empowered and motivated employees. The authors discuss several types of teams in chapter 11. Explain the major types of teams found in organizations today. Solution Answer: The Major types of teams found in organizations today are: 1) Problem solving Team: This team generally consist of 5 to 10 employees within a department who meet in a scheduled time to discuss the ways to improve quality, efficiency and enviroment. Every organization will mostly depend on problem solving teams to help in solving organization problems. In this team, members will share their knowledge, experience on how to improve the systematic working/methods in place. 2) Self-managed Team: This team generally consist of 10-15 employees who take responsibilities of their supervisors. The responsibilities includes but not limited to, Fully self managed teams will select members on their own and assess eachother\'s performance 3. Cross Functional Team: Cross functional teams are effective means of allowing people from different department within an organization to share informations, develop new ideas, solve problems and co-ordinate complex projects. It brings people from different functional experts to better invent design or deliver service. The general goal of using cross functional team include some combination of innovation, speed and quality that come from early coordination among the various specialties 4. Virtual Team: Virtual team use computer technology to tie tighter physically dispersed members in order to achieve a common goal. They allow people to collaborate online, whether they are only a room apart or separated by continents. The three primary factors that differentiate virtual teams from face to face teams are:.

As a result of total quality management, organizational changes in t.pdf

infomalad

Complete and balance the following redox equation. Show all work and both half reactions. H2S + MnO4- ------> Mn2+ + (SO4)2- (acidic solution) Solution 5 H2S + 8 MnO4- + 14 H+ ---> 8 Mn2+ + 5 SO4 2- + 12 H2O Sulfur is oxidized, oxidation state of 2- going to 6+; loses 8 electrons Manganese is reduced, oxidation state of 7+ going to 2+, gains 5 electrons that\'s where we get the coefficients of 5 and 8 then add sufficient H+ ions (it\'s an acidic solution) on the left and H2O molecules on the right to balance (add H2O to balance oxygen, then add H+ to balance hydrogen).

Complete and balance the following redox equation. Show all work and.pdf

infomalad

Candidates for PPN include patients who ______. are also candidates for TPN have fragile peripheral veins have fluid restrictions have high nutrient needs require short-term nutrition support Solution Answer=Candidates for PPN include patients who.......Require short term nutrition support Explaination= PPN - peripheral parental nutrition it is provided to patients who do not have any other source of nutrition PPN is only partial this means that patient may be getting nutrition from other sources along with PPN. Can be delivered through a peripheral vein Provided if persons digestive system has been blocked Is not a preffered nutritional suppliment for a long time.

Candidates for PPN include patients who ______. are also candidates .pdf

infomalad

Bulk movement of water across plasma membranes and the exchange of oxygen from blood into cells are similar in that the method of transport is by A) facilitated transport. B) endocytosis. C) diffusion. D) active transport. E) sodium-potassium pumps. Solution Bulk movement of water across plasma membranes and the exchange of oxygen from blood into cells are similar in that the method of transport is by Diffusion Oxygen can diffuse through cell membranes and if there is a higher concentration of oxygen outside the cell than inside, oxygen molecules diffuse into the cell..

Bulk movement of water across plasma membranes and the exchange of o.pdf

infomalad

ANSWER ALL A positively charged ion with an equilibrium potential of -10 mv would most likely (a) enter the cell until equilibrium is reached. (b) is already in equilibrium (c) exit the cell until equilibrium is reached. -20. Rank the following types of cell signaling from A to C, with A representing the type of signaling in which the signal travels the least distance and C the largest distance 8. Paracrine signaling 9. Contact-dependent signaling 0. Endocrine signaling 1. Which of the following if NOT true? (a) Nucleotides and amino acids can act as extracellular signal molecules (b) some molecules can bind directly to intracellular proteins that bind DNA and regulate signal gene transcription (c) Some signal molecules are transmembrane proteins (d) Dissolved gases such as nitric oxide (NO) can act as signal molecules, but because they cannot interact with proteins they must act by affecting membrane lipids 1-24. Which process in each pair is likely to occur more rapidly in response to an extracellular signal? 2. (a) changes in cell secretion OR (b) increased cell division (a) changes in protein phosphorylation Or (b) changes in protein synthesis 24. (a) changes in mRNA levels OR (b) changes in membrane potential 25. (a) response to acetylcholine OR (b) response to testosterone 26. Which of the following statements is true? (a) Extracellular signal molecules that are hydrophilic must bind to a cell-surface receptor so as target cell to change its behavior. (b) To function, all extracellular signal molecules must be transported by their receptor across the plasma membrane into the cytosol. (c) A cell-surface receptor capable of binding only one type of signal molecule can mediate only one kind of cell response 7. (3) Describe in detail how glucose transport occurs in the gut. Include a diagram that shows the proteins involved, their location, and function. Solution 20. A. Contact dependent signalling. B. Paracrine signalling. C. Endocrine signalling. In contact dependent signalling, signalling occurs due to contact between cells. In endocrine signaling, the signaling molecules (hormones) are secreted by specialized endocrine cells and carried through the circulation to act on target cells at distant body sites. In paracrine signaling, a molecule released by one cell acts on neighboring target cells. 21. C . Some signalling moecules are transmembrane protiens. Transmembrane protiens are not known to act as signaling molecules. Other options are true. 24. Changes in mRNA level or changes in membrane potential. 26. A Extracellullar signalling molecules that are hydrophilic must bind to cell surface receptor so as to signal a target cell to change its behaviour. The neurotransmitters carry signals between neurons or from neurons to other types of target cells (such as muscle cells). They are a diverse group of small hydrophilic molecules including acetylcholine, dopamine, epinephrine (adrenaline), serotonin, histamine, glutamate, glycine, and -am.

ANSWER ALL A positively charged ion with an equilibrium potential of.pdf

infomalad

A student can choose a computer project from one of three lists. The three lists contain 23, 15, and 19 possible projects, respectively. No project is on more than one list. How many possible projects are there to choose from? Solution The student can choose a project by selecting a project from the first list the second list or the third list, because no project is more than one list, by the sum rule there are 23+15+19=57 ways of selecting a project.

A student can choose a computer project from one of three lists. The.pdf

infomalad

7) Which reagent set could not be used to accomplish the transformation shown here? NH2 NO2 d. KMnO e. any of these reagents could be used b. Sn/HCl, then OH(aq c. LIAIHs,then H,O 8) What is the proper description of the compound shown here? a. diazonium salt b. nitroso compound c. aniline d. anilinium ion e. diazotic acid Solution 7. Sn/HCl can convert nitorbenzene to aniline. Others cannot .so the answsr will be a,c,d 8.a) it is a diazonium salt.

7) Which reagent set could not be used to accomplish the transformati.pdf

infomalad

12) The functional distribution of income measures which of the following? how federal tax revenues are related to the business function that employs taxpayers the distribution of income among nations the proportion of income generated by the four types of expenditures on goods and services the distribution of income among households the distribution of earnings by the factors of production Solution Ans The distribution of income among factors of production is what it measures. So answer is D..

12) The functional distribution of income measures which of the foll.pdf

infomalad

Why is it important for financial managers to understand the valua.pdf

infomalad

Why would a bulk forming process be chosen over a casting process to make a part? Solution 1. Time taken for the production can be minimised very effectively 2. Materials can be converted from isotropic to anisotropic which is most useful in products with different load bearing areas like connecting rods 3.Grain orientation is possible in forming 4. Very low wastage of material 5. Defects like porosity can be reduced.

Why would a bulk forming process be chosen over a casting process to.pdf

infomalad

More from infomalad (20)