Sales & Marketing Alignment: How to Synergize for Success
Contract manufacturer
1. Summary: The following press release provides detail information
about Hengtai MFG- a well-known injection molding services provider.
Most of our everyday used plastic parts are made by plastic injection
molding. While plastic injection molding may not be rocket science, it
is still a very complex manufacturing process. It involves great
attention to detail and there are many factors to take into
consideration. First, the part design must be developed and maximized
for manufacturability.
A Brief Overview of Injection Modeling Manufacturing
Welcome To Jiangsu Hengtai Electronics &
Plastic Co. Ltd.
2. Then a mold must be built. This involves high-tech
and hand tooling. The mold must then be verified
along with mastic and color options to regulate the
best formulation for the project.
Modeling Manufacturing
3. Once all the preliminary phases are complete, fine
tuning of the mold and materials may be required
before production runs are scheduled. There are some
other approaches of plastic establishing like blow
molding for the hollow products, compression molding
for the super large parts, extrusion molding for the
long and unregularly tubes or pipes. Injection
Molding When we come to the step of injection
molding, the raw material is poured into the hopper
on the top of the injection molding machine. There is
a drum under the hopper with a screw inside.
4. The key factor is to adjust the press indexes to accommodate
with the specific material and China Mold Making. When the
cavity is over packed, the volume of injected material is more
than the part in order to compensate the shrinkage, the
pressure is reduced and the cooling system start to work. After
the parts are hardened, the back platen of press moves and
ejects the parts. Then the process completes. Before we start
the mass production, the sample shots should be run for several
times until the production process is stable. , the sample shots
should be run for several times until the production process is
stable. experience or the mould maker is not professional. We
have many years of experience in China Turnkey
Manufacturing.
5. Jiangsu Hengtai Electronics & Plastic Co., Ltd.
#2 Yunmei Road, Tianmu Lake Industrial Park
Liyang, Jiangsu 213300
Tel:0519-87961188
Fax:0519-87962388
Email: sales@hengtai-mfg.com
http://www.hengtai-mfg.com/
Contact Us:
Thank You