1. Principle and Practice of
Identification of Firearms
Submitted By : Bhavya Bhardwaj
&
Surbhi Bhadoriya
M.Sc. Forensic Science
Submitted To: Dr. Navjot Kaur Kanwal
Assistant Professor
Department of Criminology & Forensic Science
Dr. Harisingh Gour Vishwavidyalaya
Sagar, Madhya Pradesh
2. Ballistics is the field of mechanics that deals with the motion of
projectile in flight and characteristics as well as the study of the
processes within a firearm as it is fired and the firing
characteristics of a firearm or cartridge.
Forensic Ballistics is the application of ballistics in the
determination of legal evidence especially concerned with the
identification of firearms, ammunition, bullets, and cartridge
cases.
Firearm identification is the process of analyzing the bullets and
cartridge cases left at a crime scene to determine if they came
from a particular firearm.
3. Principles of Firearm Identification
Locard’s Principle of Mutual Exchange
“Every contact leaves a trace”
Class Characteristics are the characteristics that remains constant for a
class.
Individual Characteristics are the exceptional characteristics that may
establish the uniqueness of an object.
4. Rifling
Calibre
Firing pin impression
Breech face marks
Ejector marks
Extractor marks
Class Characterisitics
Rifling marks on a Bullet Different marks on a Cartridge Case
5. Rifling refers to spiral grooves cut into the bore of a barrel which impart a
stabilizing spin to the bullet.
Types of Rifling
- on the basis of direction
Rifling and Calibre
Barrel design of different firearms
Leftwards Rightwards
6. - On the basis of shape
Polygroove Polygonal
Ratchet
Lancaster Oval-bore
Whitworth Conventional 8 grooves
Different Rifling Patterns
7. Calibre/Gauge
In case of smooth bore firearms, number of lead balls of a particular diameter it would
take to equal a pound is known as gauge.
Whereas in case of rifled firearms, the distance
between the opposite lands or grooves is known
as calibre.
Calibre in Rifled firearms
Gauge in Smooth bore firearm
8. Firing pin impressions are indentations created when the firing pin of a
firearm strikes the primer of centerfire cartridge case or the rim of a rimfire
cartridge case.
Different Marks on Cartridge Case
Firing Pin Impression on a
cartridge case
Rectangular Flat Rectangular Pointed Cylindrical, spheric Cylindrical, truncated cone
Cylindrical Flat Cylindircal semi spheric Square rounded Rectangular rounded
Different Shapes of Firing Pin
9. Breech Face marks are the impression marks developed when the projectile recoils
rearwards under impact of high pressure of gases produced by ignition of charge and strikes
with the breech face of the firearm.
Different Breech-Face Marks
Heavy Left Side Vertical Sansdblasted
Mottled Rim Dents Mouse Ears
Breech face of a firearm
Breech face mark on a cartridge case
10. Chamber marks are the striation marks which are produced from the rough
walls of the chamber during loading and removing of the cartridge case.
Different Chamber Marks
Diagonal
Dirt Flow Thin Heavy Ramp
Curved Spiral Light Ramp Bulging
Chamber marks on a
cartridge case
11. Extractor marks are the striation marks formed by the extractor of most auto-loading or
repeating firearms.
Ejector marks are the striation marks developed from ejector present as an opposing edge
on the rear end during ejection/ removal of the cartridge case from the chamber.
Extractor part of a firearm Extractor marks on a cartridge case
Ejector part of a firearm Ejector marks on a cartridge case
12. Manufacturing Irregularities are the random marks or imperfections produced
incidentally during the manufacturing of a firearm by tools and machinery.
Striation marks are the irregularities in the surface
of the interior of the barrel produced due to wear and tear
with use, corrosion, or damage.
Individual Characteristics
Manufacturing of a firearm Rifle Barrel Making
Striation marks produced with wear and tear
13. Comparison of firearms, cartridge cases and bullets can be done by following methods:-
Comparison microscope
Stereoscopy
Examination:
First an exhibit is compared with a standard or test sample for
class similarities/characteristics
If dissimilarities in class characteristics are found or if a general lack of
good class characteristics are present no further comparisons may be necessary
But when similar class characteristics are identified the examinations progress to a final
stage where an attempt is made to find a "match" in individual characteristics
Comparison of Firearms
Test Exhibit
14. Test Bullets are the bullets fired from the suspect firearm, in order to compare test fired
bullet with the suspected bullet.
Methods of conducting test firing:-
Water Bullet Recovery Tank
Test bullet is fired in a closed container filled water.
Muzzle of firearm is placed on open tube at the end of the
container and bullet is fired.
Bullet Catcher Collection Chamber
The chamber of the Bullet Catcher is filled with ballistic
fibers or cotton, which are commonly used in bullet retrieval
chambers. Ballistic fibers are non-flammable, so there is no
risk of fire.
Bullet Catcher Collection Chamber
Water Bullet Recovery Tank
15. It is basically a combination of two compound microscopes into a singular unit
The distinct feature of this microscope is the bridge that
connects the two microscopes and made the visuals of both
the objective lens on
a single eyepiece lens
Comparison Microscope
Comparison MicroscopeRay Diagram of a comparison microscope and field of view
16. A stereo microscope is an optical device which provides a
3-dimensional view of a specimen
It is designed for low magnification
observation of a specimen, typically
using light reflected from the surface of
the object rather than being transmitted
from it
Stereomicroscope
StereomicroscopeRay Diagram of a Stereomicroscope
17. Comparison of Different Characteristics
Rimfire & Centrefire firing pin impression
Comparison of Firing Pin Impression under : A) Comparison Microscope B) Stereomicroscope
A B
18. Comparison of Breech Face Marks
Comparison of Extractor marks
Comparison of Chamber Marks
19. Comparison of Ejector marks
Comparison of Rifling marks Comparison of Striation marks
20. Drugfire: It is an automated search system developed for FBI in early 1990s
Examination of unique markings on the cartridge casings expended by the weapon.
Specimen is analyzed through a microscope attached to a video camera of close-up view
to identify individual characteristics
The image was captured by a video camera, digitized, and stored in a database
National Integrated Ballistics Information Network (NIBIN) :
In 1999, members of the FBI and ATF joined forces to introduced the program for firearms
examination
It guides and assists federal, state, and local laboratories interested in housing an automated search
system firearms
More than two hundred law enforcement agencies worldwide have adapted to this technology
Automated Firearm Search System
21. Integrated Ballistic Identification System (IBIS): This dedicated system was developed for the
Bureau of
Alcohol, Tobacco, Firearms and Explosives,
Processed digital microscopic images of
identifying features on both expended bullets
and cartridge casings
IBIS incorporated two software programs:
Bulletproof :- A bullet-analyzing module.
Brasscatcher :- A cartridge-case-analyzing
module
Basic setup of Automated Firearm Search Database
22. REFERENCES
Saferstein, R., 2015, Criminalistics: An Introduction to Forensic Science, 11th edition, New
Jersey, Pearson Publications
Heard, B.J., 2008, Handbook of Firearms and Ballistics, United Kingdoms, Wiley
Blackwell
Gun University, https://gununiversity.com/gauge-vs-caliber-whats-the-difference/ Retrived
on 13th October, 2019
An Introduction to Forensic Firearm Identification- FirearmsID.com,
http://www.firearmsid.com/ Retrived on 30th September, 2019
Sharma, B.R., 2002, Firearms in Criminal Investigation and Trials, 3rd edition, India,
Universal Law Publishing Co. Pvt. Ltd.
Microscopy U- The source for Microscopy Education,
https://www.microscopyu.com/techniques/stereomicroscopy/introduction-to-
stereomicroscopy Retrived on 10th October, 2019