![MACRO program to face off with 6" high feed mill.
http://cncmachiningengineering.blogspot.com/2015/04/radial-high-feed-
milling.html
See more at: https://www.linkedin.com/in/greggfikes
%
<MACRO-HIGH-FEED-FACE>
#539=169.5(OD DIAMETER)
#538-#538+7.0(OD CLEARANCE)
#540=124.3(ID DIAMETER)
#540=#540-7.0(ID CLEARANCE)
#541=0.045(DEPTH OF CUT)
#544=0.
#543=,275 (TOTAL DEPTH OF CUT)
#542=[[#539-#540] / 7]*360 (CALCULATE 70% ENGAGEMENT)
#540=#540+2
G17 G98
G97 S550 M3
#538=1
G94 G54 T0303
G00 X[#539] Z0.0
WHILE[#544 LT #543]DO1(LOOP WHILE LESS THAN TOTAL DEPTH)
#543=#543+#541+#541
WHILE[#538 LT 2]DO2(LOOP CLIMB CUTTING IN THEN OUT)
W-[#541]
#538=#538+1
G01 U-1.5 F450.
G01 X[#540]H-[#542]
U-2.0
W-[#541]
U1.5
G01 X[#539] H[#542]
END2
G00 Z8.0
X[#539]
END1
M00
...
M30
%](https://image.slidesharecdn.com/macro-high-feed-face-150425161604-conversion-gate02/85/macro-highfeedface-1-320.jpg)
Recommended
More Related Content
Recently uploaded
Recently uploaded (20)
Featured
Featured (20)
Macro high-feed-face
- 1. MACRO program to face off with 6" high feed mill. http://cncmachiningengineering.blogspot.com/2015/04/radial-high-feed- milling.html See more at: https://www.linkedin.com/in/greggfikes % <MACRO-HIGH-FEED-FACE> #539=169.5(OD DIAMETER) #538-#538+7.0(OD CLEARANCE) #540=124.3(ID DIAMETER) #540=#540-7.0(ID CLEARANCE) #541=0.045(DEPTH OF CUT) #544=0. #543=,275 (TOTAL DEPTH OF CUT) #542=[[#539-#540] / 7]*360 (CALCULATE 70% ENGAGEMENT) #540=#540+2 G17 G98 G97 S550 M3 #538=1 G94 G54 T0303 G00 X[#539] Z0.0 WHILE[#544 LT #543]DO1(LOOP WHILE LESS THAN TOTAL DEPTH) #543=#543+#541+#541 WHILE[#538 LT 2]DO2(LOOP CLIMB CUTTING IN THEN OUT) W-[#541] #538=#538+1 G01 U-1.5 F450. G01 X[#540]H-[#542] U-2.0 W-[#541] U1.5 G01 X[#539] H[#542] END2 G00 Z8.0 X[#539] END1 M00 ... M30 %