The CompuSpot 180AL is a professional aluminum dent puller that is second to none in quality and performance.
Learn more at http://prolinesystems.net or call 305-793-9503
1. CompuSpot 180AL
Available Through:
Pro Line Systems International Inc.
305-793-9503
http://prolinesystems.net
2. CompuSpot 180AL
Presentation Contents
1. Introduction to the CompuSpot180AL
2. Function of the CompuSpot180AL
3. Other Features of the CompuSpot180AL
4. Technical Specifications
3. CompuSpot 180AL 1.1 Introduction to the CompuSpot 180AL
CompuSpot 180 AL is a compact dent pulling system for
aluminum panel repair.
The machine is designed for rugged use in a collision
repair environment.
The system comes
complete with everything
needed for attaching and
pulling with threaded
studs.
4. CompuSpot 180AL 1.2 Introduction to the CompuSpot 180AL
CompuSpot 180AL can weld threaded pulling studs on a
panel surface without damaging the back side.
Types of Materials:
■ Aluminum
■ Mild Steel
■ Galvanized Steel
■ Stainless Steel
5. CompuSpot 180AL 1.3 Introduction to the CompuSpot 180AL
The system is supplied with a welding gun and two ground
clamps. These two clamps distribute the current uniformly on
the surface to produce strong, consistent welds with a
minimum of heat distortion.
Current Current
6. CompuSpot 180AL 2.1 Function of the CompuSpot 180AL
CompuSpot 180AL utilizes spot welding technology
based on capacitive discharge.
When capacitors are discharged
(within a few milliseconds) a high
intensity current produces metal
fusion.
This technology makes it possible to
weld threaded studs and washers
(steel or aluminum) without damaging
surfaces. It is also possible to weld
pins for special applications.
7. CompuSpot 180AL 2.2 Function of the CompuSpot 180AL
Three rods are fixed at the head of the gun to position the
pulling stud exactly perpendicular to the panel surface. An
adjustable spring loaded system maintains uniform pressure
on the stud.
Base of
the gun
The three rods guaranty alignment of the stud.
8. CompuSpot 180AL 2.3 Function of the CompuSpot 180AL
Keyboard and Indicator Lights
Key pad selection of the ON/OFF switch located
power level (Voltage on the front of the
setting scroll speed welder for easy access.
increases if the button is
held in).
9. CompuSpot 180AL 2.4 Function of the CompuSpot 180AL
Keyboard and Light Indicators
High Voltage Indicator LIghts
Off Capacitors Discharged
Green Capacitors Charged and Ready
Red Voltage Limit Warning Light
10. CompuSpot 180AL 2.5 Function of the CompuSpot 180AL
Keyboard and Light Indicators
Overheating Indicator
Protection against overheating of power components
(SCR, transformer, capacitor, etc.)
Green Normal operating temperature
Red Warning: Risk of overheating
11. CompuSpot 180AL 2.6 Function of the CompuSpot 180AL
Keyboard and Light Indicators
Start up & weld process
Off Reload Stud
Green Charging Completed, Ready to Weld
Orange Surface Contact Made with Stud*
Red Gun’s Trigger ON – Welding in Progress
*Discharge cannot take place without contact. The risk of an
accidental discharge is eliminated. This light progression is duplicated
on the base of the welding gun so that the operator does not have to
glance repeatedly from the work to the control panel.
12. CompuSpot 180AL 3.5 Other Features
CompuSpot 180AL is certified for an IP24 level of protection
provided by cabinets or covers to prevent fouling of electrical
equipment by foreign objects, dust, and moisture.
Grade «2» as the first
digit of the code IP24
means that the
equipment is protected
against solid foreign
objects of 12,5 mm
diameter and greater
Grade «4» as the second digit of the code IP24 means that
the equipment is protected against fluids splashed from
any direction.
4 rubber supports located under the spot welder provide
stability on a cart or bench.
13. CompuSpot 180AL 4. Technical Specifications
Input Voltage 115/230 VAC Auto Detection*
Frequency 50/60 Hz
Circuit Breaker 15 A/30 A
*CompuSpot 180 will operate on either 115 or 230 volt.
The microprocesor will detect and automatically adjust for
the incoming voltage. The unit is shipped without a plug
so that the operator may exercise this voltage option.
Weight 20 Kg (44 lbs)
Dimensions 35x21x21 cm (14x 8 ¼ x8 ¼ in)
14. ?
?
?
? ?
Available Through:
Pro Line Systems International Inc.
305-793-9503
http://prolinesystems.net
? ?
?