Look out the tips for window cleaning with pressure wash. Are you looking for a window cleaning or pressure washing company that you can trust for high quality, affordable service? EZ Flow is a locally owned and operated company that provides commercial & residential pressure washing and window cleaning in Cary, NC throughout the Triangle area. calling 919-518-4929 for FREE Estimate
Tips for cleaning a window with pressure wash in Cary, NC
1.
2. To ensure the best results when cleaning your windows, you should use a power
washer. A power washer will remove dirt and debris very quickly, so you won’t have to
spend any more time than necessary on this chore! If you choose to clean your
windows the wrong way, this could damage or crack the glass. EZ Flow is one of the top
rated companies for power washing & window cleaning Cary NC. If you don’t have the right equipment and
training, washing the outside areas of your home can be time consuming and you can even damage your
property. EZ Flow can save you the time and hassle, without breaking your bank. To safely clean your
windows, read through these step-by-step instructions.
3. INSPECT THE WINDOWS
When pressure washing your windows, inspect
them for signs of damage and problems. For
example, check the window putty to make sure
it's in good condition. Also check the caulking
around the window frame and along the siding,
and pay attention to any weather stripping
issues. You need a good, tight seal to keep
water from penetrating inside your home. Make
any necessary repairs well in advance of
cleaning your windows.
4. PREPARE THE PRESSURE WASHER
Set up the power washer by connecting it to a
source of water. Before you start it or turn it
on, set the nozzle to its widest pattern or
screw on a 40- or 65-degree nozzle. Forty-
degree power washer nozzles are white, and
65-degree ones are black. Adjust the pressure
to a value between 1,500 and 2,000 psi, and
test the spray on a basement or garage
window. Spray obliquely—never perpendicular
to the window.
5. ADD THE DETERGENT
When washing wood-frame windows,
fill the soap reservoir of your power
washer with a detergent recommended
by the manufacturer. The detergent
must be safe for the material of your
window frame. If your power washer
doesn't have a soap dispenser, consider
washing them quickly using a suitable
cleaning solution and a sponge
applicator and rinsing with the power
washer.
6. SPRAY THE WINDOWS AT A 40- TO 60-DEGREE ANGLE
When washing windows, stand slightly off to the side and allow the pressure from your power
washer's stream to lessen before you start washing. When you’re done with one window, walk to
the next one to keep cleaning.
1. Use caution around wooden window trimmings, as pressure washers can damage or chip the
wood.
2. It’s important to do this step quickly—since you’re spraying soap and water onto the
windows, letting the mixture dry can lead to streaking.
3. Try to start early in the morning, especially during the summer. That way, you can beat the
sun, and your soap and water mixture won’t dry before you can rinse it.
7. STAND AT LEAST 3 TO 5 FT AWAY FROM THE WINDOWS
Standing too close can damage your windows.
When you first start out, back up until you’re at
least 10 ft (3.0 m) away from your windows. If
you need to, you can walk a little closer, but stay
at least 3 to 5 ft (0.91 to 1.52 m) away the
entire time you’re washing your windows.
•- The closer you are to your windows, the
stronger the spray is. A super strong spray
has the potential to crack glass.
8. USE A TURBO NOZZLE TO REACH THE SECOND STORY
It’s too dangerous to take a pressure
washer onto a ladder. When washing
windows from a ladder, use a pressurized
water tool called a turbo nozzle to cover
the second-story windows in soapy water.
It sends the water out in a spiral, which
can make it reach further than normal
nozzles. Pressure washers have a little bit
of kickback, so it's dangerous to use them
on a ladder.
9. RINSE THE WINDOWS OFF WITH PLAIN WATER
Rinsing your windows off well will help
prevent any streaks. After cleaning off the
soap scum, rinse the windows with a regular
garden hose or your pressure washer. Using
the same wide nozzle on your pressure
washer, set the pressure on its lowest
setting. If using your regular garden hose,
fill it up with clean water and rinse with that
to get any soap off. Be sure to empty the
water tank and rinse it out before filling it
up again. Once you have rinsed off the
windows, let them dry in the sun.
10. Your home is probably your biggest investment, so you should keep it clean and maintained throughout the
year. If you don’t have the right equipment and training, washing the outside areas of your home can be time
consuming and you can even damage your property. EZ Flow can save you the time and hassle, without
breaking your bank. We offer high quality pressure washing & window cleaning in Cary for residential &
commercial properties.
Get a Free Quote On Window Cleaning Or Pressure
Washing In Cary NC
2709 Dahlgreen Rd.
Raleigh, NC 27615
919-518-4929
ezflowwindows@gmail.com