WATERGUARD I is two part polymer based waterproofing coating, specially designed polymer to ensure perfect water tightness, with insulating property to cool down temperatures and ensures the flexibility to cover the thermal stresses. WATERGUARD I has an excellent frost resistance and can be used on vertical and horizontal surfaces.
2. Benefits
• Prepacked factory controlled, ensures consistent quality.
• Excellent resistance to water, provides good insulation
property (5º
C variation).
• Available in attractive white colour
• Can apply on horizontal and vertical surface.
• Excellent flexibility.
• Easy to apply.
• Excellent bonding with the cement base substrates.
3. Application
On prepared surface apply two coats of WATERGUARD I by brush or roller.
Mixed WATERGUARD I should be used within 20 to 25 minutes after
mixing.
5. Coverage
WATERGUARD I is prepacked two components of 10 kg
powder + 5 kg liquid, specially designed polymer processed
cement and fillers, which covers approximately 5 to 7 m2
depends upon the substrates.
6. Mixing
WATERGUARD I to be preferably mix by mechanical mixer using electrical
drill and paddle attachment. Add powder slowly in the liquid, mix
continuously until a homogeneous mix obtained. WATERGUARD I can also
be mixed by hand but should ensure proper mixing.
7. Mixing
WATERGUARD I to be preferably mix by mechanical mixer using electrical
drill and paddle attachment. Add powder slowly in the liquid, mix
continuously until a homogeneous mix obtained. WATERGUARD I can also
be mixed by hand but should ensure proper mixing.