On prepared surface apply two coats of WATERGUARD I by brush or roller. Mixed WATERGUARD I should be used within 20 to 25 minutes after mixing.

1. WATERGUARD I
HIGH PERFORMANCE, INSULATING
POLYMERISED WATER PROOF COATING

2. Benefits
• Prepacked factory controlled, ensures consistent quality.
• Excellent resistance to water, provides good insulation
property (5º
C variation).
• Available in attractive white colour
• Can apply on horizontal and vertical surface.
• Excellent flexibility.
• Easy to apply.
• Excellent bonding with the cement base substrates.

3. Application
On prepared surface apply two coats of WATERGUARD I by brush or roller.
Mixed WATERGUARD I should be used within 20 to 25 minutes after
mixing.

4. Packing & Coverage
WATERGUARD I is prepacked two components of 10 kg powder + 5 kg
liquid.

5. Coverage
WATERGUARD I is prepacked two components of 10 kg
powder + 5 kg liquid, specially designed polymer processed
cement and fillers, which covers approximately 5 to 7 m2
depends upon the substrates.

6. Mixing
WATERGUARD I to be preferably mix by mechanical mixer using electrical
drill and paddle attachment. Add powder slowly in the liquid, mix
continuously until a homogeneous mix obtained. WATERGUARD I can also
be mixed by hand but should ensure proper mixing.

7. Mixing
WATERGUARD I to be preferably mix by mechanical mixer using electrical
drill and paddle attachment. Add powder slowly in the liquid, mix
continuously until a homogeneous mix obtained. WATERGUARD I can also
be mixed by hand but should ensure proper mixing.