FAIRFLO VMA is a ready to use liquid admixture designed to modify the viscosity of self consolidating concrete. Concrete containing FAIRFLO VMA admixture exhibits superior stability and controlled bleeding characteristics, thus increasing resistance to segregation and facilitating placement.
2. Benefits
Greatly reduces or eliminates bleeding or segregation.
Evenly disperses aggregates within mix.
Eliminates need for vibration.
Provides superior slump retention.
Eliminates segregation during pumping.
Easily metered with admixture dispensing equipment.
Enables flexibility in mixture proportioning.
Increased viscosity & thixotropic properties.
Reduced sagging dimensional stability.
3. Description
FAIRFLO VMA is a ready to use liquid admixture designed to modify
the viscosity of self consolidating concrete. Concrete containing
FAIRFLO VMA admixture exhibits superior stability and controlled
bleeding characteristics, thus increasing resistance to segregation
and facilitating placement.
4. Uses
FAIRFLO VMA is recommended for use in:
Self compacting concrete
Highly flowable concrete
Pumpable concrete
Concrete with high w/c ratio
Lean concrete mixtures
5. Typical Properties
Physical Form : Liquid.
Appearance : Transparent, turbid
Density (30 ºC), [g/cm³] : 1.01 to 1.02
Viscosity (30 ºC), [mPas] : 400 to 1000
pH Value : 6.5 to 8.5
6. Packing & Dosage
FAIRFLO VMA is packaged in 1,5,10,50, 100 & 200 ltrs.
FAIRFLO VMA is dosed at the rate of 0.1 to 0.5% by weight of
cementitious material. Other dosages may be recommended in
special cases according to specific job site conditions.
7. Packing & Dosage
FAIRFLO VMA is packaged in 1,5,10,50, 100 & 200 ltrs.
FAIRFLO VMA is dosed at the rate of 0.1 to 0.5% by weight of
cementitious material. Other dosages may be recommended in
special cases according to specific job site conditions.