FAGOR ARRASATE are world specialists in the design, manufacture and supply of equipment for processing and cutting sheet metal, particularly carbon steel, stainless steel, aluminum and electrical steel.
Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
Metal rolling processing and finishing - Fagor Arrasate
1. FAGOR ARRASATE S. Coop.
San Andres Auzoa, 20
20500 Arrasate - Mondragón
Gipuzkoa ESPAÑA
Tel.: +34 943 71 99 99
Fax: +34 943 79 96 77
fagorarrasate@fagorarrasate.com
FAGOR INDUSTRIECOMMERZ GmbH
Nördliche Ringstrasse 100
D-73033 Göppingen
GERMANY
Tel.: +49 7161 2004-37
Fax.: +49 7161 2004-51
arrasate@fagor.de
FAGOR ARRASATE USA Inc.
636 Executive Drive
Willowbrook, IL 60527
USA
Tel.: +1 630 920-0422
Fax: +1 630 920-0433
fagorusa@fagorarrasate.com
FAGOR ARRASATE BRASIL
Rua Homero Vaz do Amaral, Nº 331
Villa Friburgo
CEP-04774-030 SÄO PAULO, BRAZIL
Tel.: 011 5694-0822
Fax: 011 5681-6271
fagorbrasil@fagorarrasate.com
FAGOR METALFORMING MACHINE TOOL (KUNSHAN) CO. LTD
No 2, Chuangfu Road, Qiandeng Town
Kunshan City
Jiangsu Province, CHINA
Tel.: +86 512 55155799
Fax: +86 512 55155766
info@fagormmtk.com
FAGOR ARRASATE MEXICO, S.A. de C.V.
Circuito el Marqués Norte, 2-A
Parque Industrial El Marqués
C.P. 76246 Municipio El Marqués,
Querétaro MÉXICO
Tel.: +52 442 253 1212
Fax: +52 442 253 1213
fagormexico@fagorarrasate.com
MONDRAGON - INDIA
F-89/8, 1st & 2nd floor
Okhla Industrial Area Phase I
New Delhi - 110020
Tel.: +91-11-40649000
Fax: +91-11-40649001
m.seth@fagorarrasate.com
FAGOR METALFORMING MACHINE TOOL
(Beijing Branch Office)
Room 1323 Gold Land Building
No 32, Liang ma Qiao Road
Beijing 100016 CHINA
Tel.: +86 10 64609659
Fax: +86 10 64607805
fagorchina@fagorarrasate.com
FAGOR ARRASATE S. Coop.
Block I, 19th floor, Huadu Tower, No 838
Zhangyang Road, Pudong, Shanghai
CHINA
Tel.: +86 21 20235392
Fax: +86 21 20235393
shanghaioffice@fagorarrasate.com
Laminado, Procesado y Corte de Metales
Metal Rolling, Processing and Finishing
Walzen, Verarbeiten und Schneiden von Blechen
2. Laminado, Procesado y Corte de Metales
Metal Rolling, Processing and Finishing
Walzen, Verarbeiten und Schneiden von Blechen
FAGOR ARRASATE es un especialista mundial en el diseño
y construcción de instalaciones de laminación, procesado,
recubrimiento y acabado de banda de acero, aluminio y
otros metales. Entre sus productos destacan laminadores,
líneas de proceso de banda, pintura, skin passes, líneas
de aplanado bajo tensión, líneas de corte y acabado
de todo tipo, e instalaciones de producción de tubos y
perfiles. Fagor dispone de referencias en los principales
productores de acero, aluminio y otros metales en todo
el mundo, así como en la mayoría de los grandes centros
de servicio. Fagor tiene equipos propios para asegurar el
servicio post venta en numerosos países y seis plantas de
fabricación, una de ellas en China.
steel & aluminum
SERVOBLANKING
High Flexibility & Great Productivity
Line and press speeds fully synchronized.
Blanking lines
Líneas de alimentación a prensa
Líneas de corte de trapecios
Líneas de decapado
Líneas de flejado y empaquetado
Líneas especiales
Líneas de conformación de tubo
Servicio y asistencia técnica
Automatización y control
High production flexible servodrive press.
Vacuum stacker for multishape blanks.
Strip thickness: 0,5 to 10 mm
// Tension levelling lines
// Reversible and skin pass mills
// Galvanising and painting lines
// Casting
// Cut-to-length lines
// Slitting lines
// Combined cutting lines
// Multiblanking lines
// Inspection lines
// Blanking lines
// Press feed lines
// Trapezoid cutting lines
// Pickling lines
// Banding and packaging lines
// Special lines
// Tube forming lines
// Service and technical assistance
// Automation and control
// Streck-Biege-Richtanlagen
// Reversierwalzgerüste und Dressiergerüste
// Feuerverzinkungs- und Lackieranlagen
// Stranggiessanlagen
// Querteilanlagen
// Längsteilanlagen
// Kombinierte Schneidanlagen
// Multiformat-Schneidanlagen
// Inspektionslinien
// Blanking Lines
// Bandzuführanlagen für Pressen
// Trapezschneidanlagen
// Beizanlagen
// Binde- und Verpackungsanlagen
// Sonderanlagen
// Rohrformlinien
// Technischer Service
// Automatisierung und Steuerung
Strip width: 200 to 650 mm
Rolling speed: 0-300-600 m/min
FAGOR ARRASATE is a world specialist in the design and
construction of rolling, processing, coating and finishing
installations for strip of steel, aluminium and other metals.
Among their products are: rolling mills, processing
lines, painting lines, skin passes, tension levelling lines,
cutting and finishing lines, as well as piping and profiling
installations. Fagor has references worldwide in the main
producers of steel, aluminium and other metals, as well
as in the majority of the large service centers. Fagor has
its own teams to ensure after sales service in numerous
countries and six manufacturing plants, one of which is in
China.
Entry and exit spraying system
Entry and exit air blowing drying system
Entry and exit X-ray thickness gauges for
AGC automation control
FAGOR ARRASATE, as a founder member of MONDRAGON
Corporation, one of the largest industrial European
corporations, provides the most appropriate and highly
competitive turnkey solutions.
FAGOR ARRASATE ist ein Global Player in der Konstruktion
und Fertigung von Walzwerken, Blechbearbeitungs-,
Beschichtungs- und Dressieranlagen für Stahlband,
Aluminium- und andere Metallbänder. Aus unserer
Produktpalette
stechen
vor
allem
Walzwerke,
Bandbearbeitungs-, Lackier- und Skin Pass Anlagen,
Streck-Biege-Richtanlagen, Schneid- und Dressieranlagen
aller Art, sowie Rohrfertigungs- und Profilieranlagen
hervor. Zu den Referenzen von FAGOR zählen die weltweit
wichtigsten Produzenten von Stahl, Aluminium und
anderen Metallen und die meisten großen Stahl-ServiceCenter. FAGOR kann in zahlreichen Ländern auf eigene
Teams für den After-Sale Service zurückgreifen und verfügt
über sechs Werke, eines davon in China.
Als Gründungsmitglied der Corporación MONDRAGÓN,
einer der größten Industriekooperativen Europas, liefert
FAGOR ARRASATE stets die passende schlüsselfertige
Lösung zu einem wettbewerbsfähigen Preis.
The latest rolling mills technology
for high quality steel
Material to be rolled: Hot rolled pickled
steel, cold rolled steel, high carbon steel,
HSLA - steel
FAGOR ARRASATE como miembro fundador de la
Corporación MONDRAGON, una de las mayores
corporaciones industriales europeas, puede ofrecer
soluciones idóneas, llave en mano y muy competitivas.
Líneas de aplanado bajo tensión
Laminadores Reversibles y Skin pass
Líneas de galvanizado y pintura
Coladas
Líneas de corte transversal
Líneas de corte longitudinal
Líneas de corte combinadas
Líneas de corte multiformato
Líneas de inspección
Cold
Reversing
Mill
Stacker
Press
Line
Vacuum latest technology for steel and
aluminium.
The servo-driven press is able to run up to 100
strokes per minute.
Independent rolls units and levelers for steel
and aluminium.
4 Independent vacuum belt-units.
Force: 8.000 KN.
Strip width up to 2.100 mm.
2 Stacking stations: 2100 x 4000 mm.
Bolster and slide dimensions: 4500 x 3000 mm.
Thickness: 0.5 – 3 mm. of steel.
0.5 – 2,5 mm of aluminium.
Speed: Up to120 m/min.
Stroke: Up to 180 mm.