The document provides instructions for parallel parking a vehicle. It involves making two hard left turns, backing up until seeing three cones in the mirror, and backing up until the third cone. The driver then pulls forward, makes two hard turns, backs up to the third cone, and stops when the rear tire hits a dotted line. The process is completed by making two final hard turns and fitting the vehicle within a 12-foot wide and 15-foot longer than the vehicle parking box.

1. PARALLEL PARK (Blind Side)
1 2 3 4
Hard
Left
Hard
Right
until
Straight,
See 3
Cones in
Mirror
Back Up
on #3
Cone
•Pull Forward
•2 Hard-Over Turns
•Back on #3 Cone
•Stop When Rear Tire on Dotted Line
•2 Hard-Over Turns
•Parallel Box: 12’ Wide; 15’ Longer
Than Vehicle. Bumper Box: 18”
Look
Out of
Driver
Window,
STOP at
2.5 cones
Pull
Forward
to 3/4
Mark on
Trailer
(OK to
Pull Up
Farther)
STOP When
Outside
Rear Tire
is on
Dotted Line
When 2 feet
of Landing
Gear is
outside
dotted
line, STOP.
Hard Left
& Finish
Hard
Right
2.5 cones
3 cones
3 cones
1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4
1/2
3/4
1/2
3/4