Steps to Fix Canon Printer Error 5700 By Canon Printer Support Experts.Connect Canon Printer Support Toll-Free +1-888-877-0901 to correct Error 5700 Canon Printer.To any queries related to Canon Printer Error 5700 feel to contact our Canon printer technical support team which always available 24*7*365 days for solution.
2. As you are unable to print as you receive the message Error 5700 on PC
system. To as the message being display on your computer system screen
a Fix Canon Printer Error 5700 and printer display as well. The error
displayed on Canon Printer number means sheet feeder needs to be replaced,
it can be that gears in the printer and/or sensor have become broken or faulty.
5700 is a ASF cam error most likely which is called ASF cam sensor error.
When this occur the gears cannot rotate properly causing grinding noise and 5
alternative blinks (SFP). Canon Printer are named brand which easily don’t
get technical affected. Canon Printer are manufactured by one of the leading
manufacture across the globe and among the most used.
Canon Printer when meets with technical failure need to get it fixed under the
qualified, skilled and capable technicians. In order to connect with technicians
you need to call on Canon Printer technical Support Phone Number to
avail the best of support solution. Varieties of printer are available from the
Canon such as Laser, Inkjet, and PIXMA, MAXIFY and etc.
3. Step 1: Begin with the removal of the Left and Right Covers and the Main Case
Unit which is main cover
Step 2: Next is to remove the 4 mounting screws from the Chassis.
Step 3: Now you need to remove the Main Unit from the Bottom Case.
Step 4: Try turning the Main Unit over (upside down) and place on work
surface.
Step 5: Next is to need you’re inspecting the ASF section of the Main Unit for a
gap between the white plastic guide and the Chassis. The size of the gap varies.
Even if the gap is not visible, complete the steps below.
4. Step 6: Now Disc connects the appropriate cables and remove the Logic
Board from the Chassis.
Step 7: Loosen and should do not remove the 4 mounting screws (the
mounting screws can be found behind the logic board) on the Chassis.
Step 8: Re-seat the white plastic guide so it sits flush against the Chassis. The
tip of the white plastic guide should sit slightly inside the mounting screw
hole. When the things are settled or seated correctly, the gap will no longer be
present.
Step 9: You must also tighten the 4 mounting screws without causing any
damage to plastic guide to shift.
Step 10: Reassemble the printer and retest.
5. In order to resolve the Canon Printer error 5700, the troubleshooting
approached above would work in case of either of the scenarios. If the
problem persists, then contact Canon Printer Support Number who are
available 24*7 to give you online remote assistance to solve your queries.
You can drop an email to customer support email id address or have live
chat with our skilled, capable and experienced technicians. Wait no more
and get the proper technical assistance for fixing the canon printer error.