This document provides a guide for setting up the Canon MG2922 wireless printer, detailing two methods: the WPS method and the standard connection process for both Windows and Mac users. It outlines the essential steps for a successful installation and troubleshooting tips for common issues. Additionally, contact information for Canon support is provided for further assistance.

2. For its quality and velocity of producing the prints, most individuals prefer the
Canon printers.
However, you won’t be able to use it anymore without adequate installation of
the Canon wireless printer. Therefore, this article will help you to
perform Canon MG2922 wireless setup without any hassle.

3. There are two distinct methods you can effectively perform the Canon MG2922
wireless configuration. In addition, the following techniques can be used to
prevent possible clashes during the installation phase:
Using The WPS Method
1.Turn on your Canon printer and hold the Wi-Fi button from the top of the
printer until the lamp flashes.
2.Now, check the lamp shows a blue indicator or not. If not, then try to restart the
printer.
3.However, locate the access point and press the WPS button within 1-2 minutes.
4.You can see the blue light is blinking that indicates the WPS is searching for the
access point. Hence, it becomes stable and turns into green while it is connected.
5.When done, then load the A4 sheets into the system tray and check the wireless
connection Status before taking a softcopy.
6.Now, choose the copy or documents which you want to print and press Ctrl+P
together from the keyboard.

4. Via Standard Connection Process
•For the Windows users, you can insert DVD or CD and run the Canon MG2922
wireless setup. In the case of Mac users, you can download the software from the
genuine Apple Official website.
•Click on the Next button to complete the installation process. For Mac users,
click on the Install helper and you need to click on the Next button after following
the on-screen instructions.
•Ensure that the Power lamp of the printer is on and choose the option Next to
open the next window,
•Now, click on the option Connect to the network and select the Cableless Setup
from the resultant screen.
•In the next window, tap and hold the Wi-Fi button until the orange lamp alarm
flashes for 2 times.
•Make sure that the blue Wi-Fi lamp shows an active status and the green lamp is
on.
•Click on the Next for the next two resultant windows.
•Next, choose the Next button after choosing the appropriate region and select
the residential place.
•Select the version of the Canon Printer MG2922 software to install and click on
the Next button.

5. •Click on the Yes button from the resultant dialog box to accept the Terms and
Conditions.
•After accepting the license User agreement, Click on the Finish button to
complete the installation process.
Additional Information:
•Confirm that both the device and the Canon wireless printer are in the ready
state before performing the spooling program.
•Verify the signal strength and if it drops on a frequent basis, try to fix it by
modifying the connection setup or you can connect with ISP.
•In the case of the WPS method, the WPS button is present in the access
point.
•The network must use WPA or WPA2 method for accessing the internet and
follow the protocols provided by it. Otherwise, Wi-Fi Protected access
method fails to perform the Canon Printer setup process.

6. Facing Issues with Canon Pixma
•Sometimes, Windows registry failure issue or the installation error creates a
Canon MG2922 wireless setup issue. Then, you can perform the following steps
and fix this annoying issue quickly:
•Open the Control Panel Window and click on Hardware and Sound option.
•Choose Printers from the resultant window and right-click on the Canon
MG2922.
•Select the option Run as administrator.
•In the Properties window, click on the Advanced tab.
•Click on the New Driver tab. Follow the prompt screen instructions properly by
tapping on Install the Driver option.
•It will take a few minutes to install and when done, reboot the system and
check whether the Canon printer is working properly or not.

7. USA Toll-Free : +1-844-266-0040
UK Toll-Free : +44-808-164-5280
Mail us :
support@canonprintersupport247.com