1. 6. Combing Department
6.1 Process flow chart:-
Scoured Wool Top (100%) Polyester Tow (100%)
24 hours atmospheric condition Convertor + Gilling
Carding Two Gilling
Gilling(B1,B2,B3) Third Gilling ball finisher or bump
Combing
White Poly. Black Poly.
(Bump 7.50 kg) (Ball 10 kg)
Gilling
(B4,B5 finisher)
Wool Bump(8.60kg)
Dyeing
Hydro
R.F.(Radial Frequency)
Re - Combing
2. Re – Combing
Blending (Poly. + Wool)
Gilling (A1,A2,A3) or Gilling( C1,C2,C3)
Combing
Gilling (A4 and A5 finisher) Gilling (C4 and C5 finisher)
(Bump 20 kg.) (Bump 10 kg.)
3. Table, Emulsion preparation of Oil + Water ratio
Oil Name Selbana 54 VI
Oil + Water ratio 1:20
Oil 1 litre
Water 20 litre
Total 21 litre
5. Table: Carding Gauges of Card
Particular Dia. (mm) RPM Gauge (mm)
Feed roll 100 mm 4 1 mm
Feed roll brush 210 mm 4 Cont.
Feed roll to licker in 110 mm 10 5 mm
Spreader roll on licker in 120 mm 35 0.8 mm
Transport to Breast - 45 2.5 mm
Brush bent breast and Licker in 300 mm 40 Cont.
Burr roll and licker in 160 mm 850 2.5 mm
Breast 1508 mm 12 -
Stripper covered with
brush(5nos)with breast and
worker 70 mm 45 0.7 mm
Worker on Breast
1 260 mm 12 6 mm
2 260 mm 12 5 mm
3 260 mm 12 4 mm
4 260 mm 12 3.5 mm
5 260 mm 12 3 mm
Brush beth Breast and morel 300 mm 80 Cont.
1st
Morel 180 mm 90 -
Burr roller 1st
Morel 160 mm 1215 0.25 mm
Brush betn 1st
and 2nd
Morel 300 mm 210 Cont.
2nd
Morel 180 mm 90 -
Burr roller 2nd
Morel 160 mm 1215 0.25 mm
Angular stripper with Morel 280 mm 398 0.4 mm
Angular stripper with cylinder 280 mm 398 0.6 mm
6. Cylinder 1508 mm 126 -
Stripper with cylinder and
worker
110 mm 300 0.7 mm
Worker with cylinder
1 274 mm 14 1.5 mm
2 274 mm 14 1.2 mm
3 274 mm 14 0.8 mm
4 274 mm 14 0.6 mm
5 274 mm 14 0.5 mm
In between Doffer and Cylinder 1270 mm 10 0.3 mm
1. Preparatory Gilling
Table: Machine specifications of Gilling (B1,B2,B3)
Sr.No. Particular B1 B2 B3
1 Make of machine
(company)
N. Schlumberger & Company
( N.S.C.)
2 Model of machine GC13 GC13 GC13
3 Faller fitted type Chain type Chain type Chain type
4 No. of delivery Single Single Double
5 Faller PPC 3ppc 4ppc 5ppc
6 Feed wrapping (22.5µ) 24-25 g/m 25 g/m 30g/m
7 Delivery wrapping 30g/m 25g/m 16+16=32g/m
8 Oil 320 to 350cc
9 No. of Doubling 7 6 4+4=8
10 Speed 222mpm 224mpm 227mpm
7. Figure: - Fibre configurations from card to comb
Process Combing
Table: Combing Machine Specifications
Sr. No. Particular Specification
1 Make of machine (company) N. Schlumberger and Company (N.S.C.)
2 Model of machine PB30 and PB29
3 No. of machine 1 and 6 = 7
4 Speed Nip/Min. 170 to174 and 165 to 170
5 No. Doubling 24
6 Feed wrapping gm/mt. 16
7 Delivery wrapping gm/mt. 24
8 Noil % 6.84%
Card 1st Gill 2nd Gill
3rd Gill
1st Gill
Comb
Can Can
Can
Can
8. Woollen Top Finishing
The woollen top finishing usually consists of two gilling operations on the combed slivers.
Table, Gilling (B4,B5) machine specifications
Sr. No. Particular B4 B5
1 Make of machine
(company)
N. Schlumberger & Company
( N.S.C.)
2 Model of machine GC13 GC13
3 Faller fitted type Chain type Chain type
4 No. of delivery Single Single
5 Faller ppc 5ppc 6ppc
6 Feed wrapping (22.5µ) 24g/m 26g/m
7 Delivery wrapping 26g/m 28g/m
8 No. of Doubling 8 8
9 Speed mpm 215 mpm 225 mpm
10 Wool top wt. - 8.5 kg.
10. Table, Machine Specifications of Gill Box
Sr.No. Particulars Zinser Section 5700 Section
1
Mark of machine (company) N. Schlumberger and Company
(N.S.C.)
2
Model of machine GC 14 GN 6
3
Fallers fitted type Chain Type Screw Type
4
Nos. of fallers 2 x 72 = 144 144
5
Pin width 220 and 270 220
6
Working fallers 22 28
7 Pin projection in mm 14 17.5
8
Pinned length in mm 200 220
9
Input speed in mt/min 80 60-80
10
Top roller dia. in mm 80 80
11
Maxi. Speed 200mt/min 100mt/min
12
Maxi. load on material Gms/Mtr. 350 300
13
Electrical Power KW 7.5 – 9 7.5
Table, Gill box machine maintenance
Sr. No. Maintenance job Period
1
Machine cleaning 1 month
2
Top buffing 1 month
3
Oiling and greasing 1 month
4
Servicing of faller driving unit 3 month
5
Servicing of central lubricating device 6 month
6
Spare replacement 3 month
7
Servicing of coiler drive 1 year
11. 8
Oil change 1 year
Table, GV20 machine specification
Sr. No. Particulars Zinser section
2 Drafting Vertical drafting
3 No. of fallers/heads 2x56 = 112
4 No. of pins per cm 7
5 Maximum delivery speed 500m/min
6 Maximum input speed 85m/min
7 Fallers pin length 85mm
Can springs:- Penta-graph spring for GV-20A and oil spraying
Table, GV20 machine maintenance
Sr. No. Maintenance work Period
1 Machine cleaning 1 month
2 Greasing total point 1 month
3 Oiling total chain and gears 1 month
4 Top roller buffing 3 month
5 Oiling to creel chain 3 month
6 Coiler of hauling 6 month
12. 7 Servicing of faller drive unit 6 month
8 Faller chain 2 year
9 Servicing of coiler drive 1 year
Table, roving machine specifications
Sr. No. Particulars BM13 BM15 FM-7
1 Make of machine N.S.C. N.S.C. N.S.C.
2 Model of machine BM13 old BM15 (N) FN-7
3 Spindles per Machine 64 64 20×2 = 40
4 Spindle speed rpm range 600-800 800-1000
5 Twist Range TPM 8.9 - 47.6 5.4 – 108 6 rubs/mts.
6 High Twist TPM 50 - 165 34.6 – 211
7 Flyer Speed 600 - 1300 600 –1800
8 Delivery Speed (maxi.) 72mpm 100mpm 150mpm
Table, Processing parameters for Rubbing Frame: FM 7
13. Blend 380 530 265
Count 24 NM 56 NM 60 NM
Delivery speed 160m/min 160m/min 160m/min
Rubs / mtrs. 6 6 6
Delivery package wt. 2.6kgs 2.5kgs 2.25kgs
Draft 11.66 13.33 13.33
Package build Cheese two roves on one package
Feed. Hank (gm/mt.) 7 6 5.6
Delivery hank 0.60 0.45 0.42
Difference between BM 13 and BM 15 N
The differences in these two models are just some machine difference and processing parameters difference. The all
concepts and function of machine are same.
Sr. No. BM 13 BM 15
1 Generally used for coarse roves as
lower Draft capacity BM 15
It has more drafting capacity and
Generally used for finer roves.
2 Slower speed up to 30 mpm Double speed up to 60 mpm
3 Manually adjustments for initial
Belt position or cone drum
Automatic adjustments of belt.
For initial position by key press.
4 Rove tension wheel is at bulk so
Worker faces difficulty for adjustments.
Front side roves tension adjustment
Easy to do operations.
14. 5 Small cages are provided for group
Suction on machine.
Centralized suction at one end of
machine.
6 Low width and lower microprocessor
control.
Advanced version with high microprocessor
control, more width machine.
Table, Ring frame machine specification
Name of
Department
Make (company) Model No. of machine
Old + New
Spindle
Ring frame Sant Andrea
TL2 10 06
Old= 10×576= 5760
New= 06×400=2400
Zinser RM450 8 - Old= 8×576= 4608
Textool WS60 2 34+4
Old=2×400= 800=800
New=34×400+4×112=14848
Total 20 40
Old=11168+New=14848
Total = 26016
Table, Ring frame machine maintenance
Sr. No. Job work Period
1 Front top roller buffing 3 months
2 Back top roller buffing 6 months
3 Top arm pressure 3 months
15. 4 Spindle oil change 2 year
5 Top apron change 1 year
6 Spindle gauging 1 year
7 Ring traveller change 10 days
8 Machine cleaning 15 days
Table, Zinser ring frame machine maintenance
Sr. No. Job work Period
1 Ring traveller change 10 days
2 Machine cleaning 15 days
3 Bottom roller drafting 3 months
4 Front roller buffing 6 months
5 Back top roller buffing 1 year
6 Spindle oil change 1 year
7 Spindle gauging 1 year
16. Incepted in 1925, Raymond has been synonymous with Trust, Quality and Excellence.
Raymond is a diversified group with majority business interests in Textile & Apparel sectors as well as
presence across diverse segments such as FMCG, Engineering and Prophylactics in national and
international markets. Having enjoyed the patronage of over a billion consumers, Raymond as a brand
has been consistently delivering world class quality products to its consumers since the past nine
decades.
Being a vertically and horizontally integrated manufacturer of Textiles, Raymond produces ‘The finest
fabric in the world’. With over 1100 exclusive stores spread across 380+ cities and an expansive
network of over 20,000 points-of-sale in India, Raymond and its brands are also available in tier IV & V
cities. Over the years, Raymond has emerged as a preferred choice for top design houses across 55
countries. Raymond has also been a leading player in Shirting fabrics and is the No.1 brand in the
OTC space. A formidable player in the Denim space, Raymond is also the top producer & preferred
supplier of high quality Ring Denim to world’s leading Jeanswear brands. Given our fibre to fabric
manufacturing capabilities, Raymond is a textile powerhouse with state of the art manufacturing
infrastructure, best industry practices that has raised the bar of Indian textile manufacturing.
Having established its dominance in the Textiles, Raymond is also an aggressive player in the ready to
wear apparel segment with reputed brands such as Park Avenue, Raymond Ready To Wear ColorPlus
& Parx that are a part of its product portfolio. Having pioneered the innovative concept of customised
clothing, ‘Raymond Made To Measure’ offers luxurious service allows discerning customers to
personalize their ensemble bringing together their own personal taste.
The Raymond Group is present in the FMCG business through associate companies – J.K. Helene
Curtis Limited and J.K. Ansell Private Limited (JKAL). Through these companies, Raymond Group
caters mainly to the male grooming segment through pioneering brands like Park Avenue and KS;
home care segment through Premium brand and sexual wellness segment through KamaSutra brand.
Raymond Group also has an extensive presence in the B2B space, through its garmenting business.
Raymond’s state of the art & wholly owned subsidiaries such as Silver Spark Apparel Ltd, Celebrations
Apparel Ltd & Everblue Apparel Ltd by crafts suits, trousers, shirts & Jeans for leading fashion labels
across the world and is the only manufacturer of Full canvas premium Jackets in India.
Raymond Ltd. ventured into the engineering business with the establishment of JK Files (India) Ltd. in
1949. Today, JK Files Ltd. is a leading manufacturer of steel files in the world with a domestic market
share of about 65% in the files business. The group also has a presence in the auto components
industry through its subsidiary Ring Plus Aqua Ltd. This business comprises of the manufacture of
Ring Gears, Flexplates and Water pump bearings. The company is present in diverse industry
segments such as Automotive, Industrial and Power generators, Agricultural and Marine Applications,
marked by strong relationships with domestic and international OEMs.
17. Raw Materials & Goods (R.M.G)
WOOL:
Wool is a natural fibre. It is obtained from sheep.
It’s classified into animal protein fibre.
Wool is mainly imported through Australia & South Africa are of Different Quality.
Pure Wool, Blended Wool.
JALGAON (Combing Deptt.)
22.5 MIC Wool Tops
Colour Card Parameter:
MIC COLOUR
19
Sky Blue
21
Pink
22.5
Yellow
24.5
Blue
LOT NO. J20016225B
BORA/TR NO. 20
NETT WT. 102.60
DATE 28/5/2019
18. POLYESTER:
Polyester is a Man-made Fibre.
It is synthesized artificially prepared by man.
JALGAON (Combing Deptt.)
2.0 Denier Normal Polyester (DNP) Black Top
RECRON
Reliance Industries Limited,
2.0 Denier Normal Polyester (DNP) Black Top
LOT NO. J20016225B
BORA/TR NO. 20
NETT WT. 102.60
DATE 28/5/2019
MERGE WIBTQ450
LUSTRE BLACK TRILOBAL
LOT NO. J20016225B
NETT WT. 358.20 KG
GROSS WT. 359.60 KG