The document describes a new flexible laptop concept called Roll Over. It has a flexible OLED display that allows it to be rolled up like a poster when not in use. It can be unrolled into different modes - a 13 inch laptop, 17 inch tablet, or 17 inch HD TV. Key features include an Intel i9 processor, 10GB RAM, 2TB SSD, Android operating system, and integrated camera and speakers. The flexible OLED display allows for thinner, lighter design compared to regular laptops and more portable form factors. It is priced at $2000 and available for pre-order on their website.
10. Roll Over
U can do
Whatever
U Want..!
12-01-2015
10
Copywirte @ MuNa
11. Roll Over
Roll Over is a all in one Gadget
which we able to roll over this gadget
like a chart paper.
The device of the flexible
display allows a new technology in
notebook design growing out of the
traditional "bookformed" laptop
into unfurling and convolving
portable computer.
12-01-2015
11
Copywirte @ MuNa
12. Roll Over will take advantage of
advances in flexible OLED and
touchscreen technologies to create a
cylinder-shaped laptop computer that
can be rolled out to form a notebook,
a tablet, or display monitor.
Roll Over incorporates both
latest
high-tech devices and a new brand
design techniques into a computer.
12-01-2015
12
23. *Bluetooth ® 5.0 and Wi-Fi 802.1
l/g/n
*Web Camera embedded in Stem
of 20 mega pixel and HD video
recording of 1080p
*2.1 Multimedia
Speakers are also
embedded in Stem with 360o
Hearing angle capability.
12-01-2015
23
Copywirte @ MuNa
25. Display can be
used as another
power source,
because of built in
Photovoltaic Cells
12-01-2015
25
Copywirte @ MuNa
26. Even in the
absence of
natural
luminance we
can switch over
to direct power
source with 1.
Wired
charging
2.Wireless
Charging
12-01-2015
26
Copywirte @ MuNa
33. 12-01-2015
By virtue of the
OLED-Display
technology and a
multitouchscreen the
utility of a laptop
computer with its
weight of a mininotebook and screen
size of 13 inch easily
transforms into the
graphics tablet, with
which its 17-inch flat
screen can be also
33
Copywirte @ MuNa
36. Easy to
carry
No laptop bag
needed - all computer
utilities from an
interactive pen through
power supply to the
holding belt are
integrated in Roll Over.
12-01-2015
36
Copywirte @ MuNa
Custom animation effects: motion paths with auto-reverse, varying speeds(Advanced)To reproduce the shape effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, select Rectangle (first option from the left). On the slide, drag to draw the first rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 10.5”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid fill,and then do the following:Click the button next to Color, and click MoreColors.In the Colors dialog box, on the Custom tab, enter values for Red: 86, Green: 113, Blue: 118.In the Transparency box, enter 40%. Also in the Format Shape dialog box, in the left pane, click Line Color, and then inthe Line Color pane, click No line.Select the rectangle.On the Home tab, in the Clipboard group, click the arrow underPaste, and then click Duplicate. Select the duplicate rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 4.96”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher.In the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, select Solid fill. Click the button next to Color,and then under Theme Colorsselect Red, Accent 2, Darker 50% (sixth row, sixth option from the left). In the Transparency box, enter 40%.Press and hold SHIFT and select both rectangles. On the Home tab, in the Drawing group, click Arrange,point to Align, and then do the following:Click Align to Slide.Click Align Center.Click Align Middle.To reproduce the animation effects for the second rectangle on this slide, do the following:Select the second rectangle (smaller, red).On the Animations tab, in the Animations group, click CustomAnimation. (Note: For this animation effect, the first (largest, blue) rectangle remains stationary on the slide.)In the Custom Animation task pane, click Add Effect, point to Motion Paths, and then click Right. On the slide, select motion path endpoint (red arrow), and drag the end of the path beyond the right edge of the slide. Select the motion path starting point (green arrow), and drag the starting point of the path beyond the left edge of the slide. In the CustomAnimationtask pane, click the motion path animation effect,and then under Modify: Right,in the Start list,select With Previous. Also in the CustomAnimationtask pane, click the arrow next to the motion path animation effect, and click Effect Options. In the Right dialog box, do the following:On the Effect tab, under Settings, select Auto-Reverse.On the Timing tab, in the Speed box, enter 3.55 seconds, and thenin the Repeat list, select Until End of Slide.To reproduce the animation effects for the third rectangle on this slide, do the following:Select the second (small, red) rectangle.On the Home tab, in the Clipboard group, click the arrow under Paste, click Duplicate, and then drag the new rectangle (along with the new motion path) above the other rectangles. Repeat this step three more times until there is a total of six rectangles (including the original two).Select the third rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 3.16”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid fill,and then do the following:Click the button next to Color, and then click MoreColors.In the Colors dialog box, on the Custom tab, enter values for Red: 79, Green: 129, Blue: 189.In the Transparency box, enter 40%. On the Animations tab, in the Animations group, click CustomAnimation. In the CustomAnimation task pane, click the third rectangle motion path animation effect, and then under Modify: Right, in the Start list,select With Previous. Also in the CustomAnimationtask pane, click the arrow next to the third rectangle motion path animation effect, and then click Effect Options. In the Effect Options dialog box, do the following:On the Effect tab, under Settings, select Auto-Reverse.On the Timing tab, in the Repeat list,select Until End of Slide, and in the Speed box, enter 3.1 seconds.On the slide, position the third rectangle on the first (and longest) rectangle, lining up the top and bottom edges.To reproduce the animation effects for the fourth rectangle on this slide, do the following:Select the fourth rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 1.68”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Solid fill,and then do the following:Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Darker 50% (sixth row, seventh option from the left).In the Transparency box, enter 40%. On the Animations tab, in the Animations group, click CustomAnimation. In the CustomAnimation task pane, select the fourthrectangle motion path animation effect, and under Modify: Right, in the Start box, select With Previous. Also in the CustomAnimationtask pane, click the arrow next to the fourth rectangle motion path animation effect, and then click Effect Options. In the Effect Options dialog box, do the following:On the Effect tab, under Settings, select Auto-Reverse.On the Timing tab, in the Repeat list,select Until End of Slide, and in the Speed box, enter 3.95 seconds.On the slide, position the fourth rectangle on the first (and longest) rectangle, lining up the top and bottom edges.To reproduce the animation effects for the fifth rectangle on this slide, do the following:Select the fifthrectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 1.5”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Solid fill,and then do the following:Click the button next to Color, and then click MoreColors.In the Colors dialog box, on the Custom tab, enter values for Red: 127, Green:140, Blue: 60.In the Transparency box, enter 40%. On the Animations tab, in the Animations group, click CustomAnimation. In the CustomAnimation task pane, select the fifthrectangle motion path animation effect, and then under Modify: Right, in the Start list,select With Previous. Also in the CustomAnimationtask pane, click the arrow next to the fifth rectangle motion path animation effect, and then click Effect Options. In the Effect Options dialog box, do the following:On the Effect tab, under Settings, select Auto-Reverse.On the Timing tab, in the Repeat list, select Until End of Slide, and in the Speed box, enter 5.3 seconds.On the slide, position the fifth rectangle on the first (and longest) rectangle, lining up the top and bottom edges. To reproduce the animation effects for the sixth rectangle on this slide, do the following:Select the sixth rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.86”.In the Shape Width box, enter 0.98”.Under Drawing Tools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Solid fill,and then do the following:Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Darker 25% (fifth row, seventh option from the left).In the Transparency box, enter 40%. On the Animations tab, in the Animations group, click CustomAnimation. In the CustomAnimation task pane, select the sixth rectangle motion path animation effect, and under Modify: Right, in the Start box, select With Previous. Also in the CustomAnimationtask pane, click the arrow next to the sixth rectangle motion path animation effect, and then click Effect Options. In the Effect Options dialog box, do the following:On the Effect tab, under Settings, select Auto-Reverse.On the Timing tab, in the Repeat list, select Until End of Slide, and in the Speed box, enter 4.2 seconds.On the slide, position the sixth rectangle on the first (and longest) rectangle, lining up the top and bottom edges. To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 40%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 50% (second row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
Members
It is quad sector
Custom animation effects: tipping scales(Difficult)To reproduce the shape effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and under BasicShapes select Oval (first row, second option from the left). Press and hold SHIFT and on the slide, drag to draw a circle.Select the oval. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter2.16”.In the ShapeWidth box, enter2.16”.With the oval still selected, on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane, do the following:Select Solidfill.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 25% (fourth row, first option from the left).Also in the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane, click Noline.Also in the FormatShape dialog box, click 3-DFormat in the left pane, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Angle (second row, first option from the left).Next to the Top list, in the Width box, enter 5.5 pt, and in the Height box, enter 9.5 pt. Under Depth, in the Depth box, enter 3.5 pt.Also in the FormatShape dialog box, click 3-DRotation in the left pane, and in the 3-DRotation pane, under Rotation, do the following:In the X box, enter 297.8°. In the Y box, enter 298.9°. In the Z box, enter 65.2°.Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, do the following:In the Transparency box, enter 60%.In the Size box, enter 105%. In the Blur box, enter 15 pt. In the Angle box, enter 120°. In the Distance box, enter 9 pt.Drag the circle to the bottom of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align and then select AlignCenter. On the Home tab, in the Drawing group, click Shapes, and under Rectangles select RoundedRectangle (second option from the left). On the slide, drag to draw a rounded rectangle.Drag the yellow diamond adjustment handle to the right to create a rounded top.Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, in the ShapeHeight box, enter 4.2”, and in the ShapeWidth box, enter 0.18”.On the Home tab, in the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, in the left pane, click Fill, and in the Fill pane, do the following:Click Solidfill. In the Color list, under ThemeColors, select White, Background 1, Darker 15% (third row, first option from the left).Also in the FormatShape dialog box, in the left pane, click LineColor, and in the LineColor pane, click Noline.Also in the FormatShape dialog box, in the left pane, click 3-DFormat, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left). Next to the Top list, in the Width box, enter 10 pt,and in the Height box, enter 10 pt. Position the bottom of rectangle so that it slightly overlaps the oval.Select the rounded rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. With the rounded rectangle still selected, on the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the second rounded rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter4.35”.In the ShapeWidth box, enter0.13”.With the second rounded rectangle still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and select RotateLeft 90°. Position the second (horizontal) round rectangle so that it slightly overlaps the top of the first, vertical round rectangle.Select the second (horizontal) round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. Select the first (vertical) round rectangle. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the third (vertical) rounded rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter0.32”.In the ShapeWidth box, enter0.32”.Position the third, smaller round rectangle at the intersection at the top of the first (vertical) and second (horizontal) round rectangles.Select the third, smaller round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. Press and hold SHIFT and select the second (horizontal) and third (smaller) round rectangles. On the Home tab, in the Drawing group, click Arrange, and select Group.Select the oval. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the second oval. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter1.93”.In the ShapeWidth box, enter1.93”.On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 15% (third row, first option from the left).Also in the FormatShape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list, select NoShadow. Also in the FormatShape dialog box, click 3-DFormat in the left pane, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Slope (second row, fourth option from the left).Next to the Top list, in the Width box, enter 5.5 pt,and in the Height box, enter 5 pt. Under Bevel, in the Bottom list, under Bevel, select Angle (second row, first option from the left). Next to the Bottom list, in the Width box, enter 11 pt,and in the Height box, enter 5 pt.Also in the FormatShape dialog box, click 3-DRotation in the left pane, and in the 3-DRotation pane, under Rotation, do the following:In the X box, enter 287.8°.In the Y box, enter 297.1°.In the Z box, enter 74.1°.Position this oval (or dish) on the left side of the slide, approximately 2.5 inches below the horizontal round rectangleOn the Home tab, in the Drawing group, click Shapes, and under Lines select Line (first option from the left). On the slide, drag to draw a line from the left edge of the horizontal rectangle to the bottom left edge of the dish.Select the line. On the Home tab, in bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:Click Solidline. Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 25% (fourth row, first option from the left).Also in the FormatShape dialog box, click LineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.75 pt. In the Dashtype list, select Round Dot (second option). In the Captype list, select Round. In the Jointype list, select Round. Select the line. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate. Select the second line. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and select FlipHorizontal. Position the duplicate line so the top point is at the same position as the top point on the first line. Position the endpoint on the right edge of the dish.On the Home tab, in the Drawing group, click Arrange, and then select Send to Back. Press and hold CTRL and select both lines and the dish. On the Home tab, in the Drawing group, click Arrange, and select Group. Select the group (the two dotted lines and the dish). On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate. Position the second group on the right side of the slide.Press and hold CTRL and select both left and right groups. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and select AlignSelectedObjects.Point to Align, and select AlignTop.Select Send to Back.To reproduce the animation effects on this slide, do the following:Select top horizontal bar group. On the Animations tab, in the Animations group, click CustomAnimations.In the CustomAnimation task pane, click AddEffect, point to Emphasis and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic, select Spin, and then click OK.In the CustomAnimation task pane, select the animation effect, and then under Modify: Spin,do the following:In the Start list, select WithPrevious.In the Amount list, in the Custom box, enter 10, and then press ENTER. Also in the Amount list, select Clockwise.In the Speed list, select Fast.Click OK.Select the left dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPaths, and select Up.In the CustomAnimation task pane, select the Up motion path, and then under Modify: Up,do the following:In the Start list, select WithPrevious. In the Speed list, select Fast. Click OK.In the CustomAnimation task pane, select the Up motion path effect. On the slide, press and hold the SHIFT key and drag the endpoint (red arrow) down to shorten the motion path to approximately .33” in length. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)In the CustomAnimation task pane, click the arrow to the right of the Up motion path and select EffectOptions. In the Up dialog box, on the Effect tab, under Settings, clear both SmoothStart and SmoothEnd and then click OK.Select right dish group. In the CustomAnimation task pane, click the arrow next to AddEffect, point to MotionPaths, and select Down.In the CustomAnimation task pane, select the Down motion path, and then under Modify: Down, do the following:In the Start list, select WithPrevious. In the Speed list, select Fast.Click OK. In the CustomAnimation task pane, select the Down motion path. On the slide, press and hold SHIFT and drag the endpoint (red arrow) up to shorten the path to approximately .33” in length.In the CustomAnimation task pane, click the arrow next to the Down motion path and select EffectOptions. In the Down dialog box, on the Effect tab, under Settings, clear SmoothStart, clear SmoothEnd, and then click OK.Select the top horizontal bar group. In the CustomAnimation task pane, click the arrow next to AddEffect, point to Emphasis, and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic, select Spin,and then click OK.In the CustomAnimation task pane, select the second Spin animation effect, and then under Modify: Spin do the following:In the Start list, select OnClick. In the Amount list, in the Custom box, enter 20°, and then press ENTER. Also in the Amount list, select Counterclockwise. In the Speed list, select Fast. Click OK.Select the left dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPaths, and select Down. In the CustomAnimation task pane, select the Down motion path, and then under Modify: Down, do the following:In the Start list, select WithPrevious. In the Speed list, select Fast. Click OK.In the CustomAnimation task pane, select the Down motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first up motion path. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box, enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)On the slide, select the down motion path for the left dish and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.In the CustomAnimation task pane, click the arrow next to the down motion path for the left dish, and then select EffectOptions. In the Down dialog box, on the Effect tab, under Settings, clear SmoothStart and SmoothEnd,and then click OK.Select the right dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPath, and select Up.In the CustomAnimation task pane, select the Up motion path for the right dish, and then under Modify: Up,do the following:In the Start list, select WithPrevious.In the Speed list, select Fast.Click OK.In the CustomAnimation task pane, select the Up motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first down motion path.On the slide, select the upmotion path for the right dish, and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.In the CustomAnimation task pane, click the arrow next to the upmotion path for the right dish and select EffectOptions. In the Up dialog box, on the Effect tab, under Settings, clear SmoothStart and SmoothEnd,and then click OK.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 65%.Click the button next to Color, and then click underThemeColors select White, Background 1 (first row, the first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 96%.Click the button next to Color, and then click underThemeColors select Black, Text 1, Lighter 50%(second row, the second option from the left).