This document provides instructions for setting up a 40' x 40' Classic Series Frame Tent. It discusses important safety information and outlines the parts included in the tent kit. The setup instructions are as follows: 1) Lay out the frame parts on the ground, 2) Connect the 8-way crown to the hip rafters, 3) Connect the remaining frame pieces in a specific order, 4) Attach cables across the width of the tent, 5) Fasten loop straps to the legs, 6) Attach the ratchet assemblies to the loop straps, and 7) Lace the tent sections together from the middle outwards. Proper staking and weather precautions are also summarized.